Proxim ORiNOCO AP-800 Installation And Management Manual page 164

Static MAC Table
To configure the Static MAC filtering table parameters, enter the following CLI commands.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09 # configure
AP-00:7D:09 (config)#filtering
AP-00:7D:09 (config-filter)# staticmac
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 entry-status create
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 wired-mac-address
00:11:22:33:44:55
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 wired-mac-mask
ff:ff:ff:ff:ff:ff
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 wireless-mac-address
00:22:33:44:55:67
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 wireless-mac-mask
00:00:00:00:00:00
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 filter-comment wiredonly
AP-00:7D:09 (config-filter-staticmac)#rowadd 0 entry-status create
AP-00:7D:09 (config-filter-staticmac)#exit
AP-00:7D:09 (config-filter)#exit
AP-00:7D:09 (config)#exit
AP-00:7D:09# show filtering staticmac
// STATIC MAC ADDRESS FILTER TABLE CONFIGURATION //
INDEX 1
Wired Mac Address : 00:11:22:33:44:55
Wired Mac Mask : ff:ff:ff:ff:ff:ff
Wireless Mac Address : 00:22:33:44:55:67
Wireless Mac Mask : 00:00:00:00:00:00
Filter Comment : wired only
Entry Status : enable
Device Configuration, Management and Monitoring using CLI
164