2.6.3 Modifying the IP Address
Select the device details from the Scan List and click Change. A Change screen appears as shown in the following figure. The
system automatically generates the MAC address, System Name, TFTP Server IP Address and Image File Name of the
device.
2.6.3.1 Assigning the IP Address Manually
1. Select the IP Address Type as Static and enter the appropriate IP Address, Subnet Mask, and the Gateway IP
Address parameters.
2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.
3. Click OK to save the changes.
4. Click Rescan to verify the changes applied.
5. Click Web Configuration to open the web interface.
2.6.3.2 Assigning the IP Address Dynamically
: Before setting the IP Address Type as Dynamic, ensure there is a DHCP server on the network.
To change the IP Address type from Static to Dynamic, follow these steps:
1. Select the IP Address Type as Dynamic. The IP Address, Subnet Mask and the Gateway IP Address fields get
disabled.
2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.
3. Click OK to save the changes.
4. Click Rescan to verify the changes applied.
5. Click Web Configuration to open the web interface.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 2-6 Modifying the IP Address
Installation and Initialization
26