Qos Policy - Proxim ORiNOCO AP-800 Installation And Management Manual

Hide thumbs Also See for ORiNOCO AP-800:
Table of Contents

Advertisement

2. Configure the following parameters:
QoS Profile Name: Specifies a read-only parameter that represents the QoS profile name.
: By default, the device has only one defined QoS Profile by name Default.
Policy Name: Specifies the QoS policy name. By default, the QoS Policy Name taken is Default.
EDCA Profile Name: Specifies the EDCA Profile Name. By default, the EDCA Profile Name taken is Default.
QoS NoACK Status: Specifies the QoS profile acknowledgement status. By default, the QoS NoACK Status is
disabled. To configure, select either Enable or Disable from the drop down menu.
3. Click OK, to save the configured parameters.
: QoS Profile Name is applicable only for wireless interfaces.

3.6.5 QoS Policy

To configure QoS Policy parameters, do the following:
1. Navigate to CONFIGURATION > QoS > QoS Policy. The Qos Policy screen appears.
2. Configure the following parameters:
Policy Name: Specifies a read-only parameter which represents the QoS Policy Name.
Policy Type: Specifies a read-only parameter which represents the QoS Policy Type. The available Policy types are:
— Inbound Layer 2: Represents inbound traffic direction with layer 2 traffic type
— Outbound Layer 2: Represents outbound traffic direction with layer 2 traffic type
— Inbound Layer 3: Represents inbound traffic direction with layer 3 traffic type
— Outbound Layer 3: Represents outbound traffic direction with layer 3 traffic type
Priority Mapping Index: By default, the priority mapping index is set to 1. For layer 2 policies configuration, an
index from the 802.1d to 802.1p mapping table should be specified. For layer 3 policies configuration, an index
from the 802.1d to IP DSCP mapping table should be specified.
Marking Status: Specifies the QoS Marking Status. By default, it is disabled. To configure, select Enable or
Disable from the drop down menu.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Device Configuration Using Web Interface
Figure 3-29 QoS Policy
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orinoco ap-8000

Table of Contents