Proxim ORiNOCO AP-800 Installation And Management Manual page 101

4.2.3.2 Retrieve from Device by using TFTP
To retrieve Configuration files, Event Logs and Text Based Templates from the device by using TFTP, do the following:
1. Navigate to MANAGEMENT > File Management > Retrieve from Device. The Retrieve from Device screen
appears.
2. Click TFTP.
3. Server IP Address: Specifies the IP Address of the TFTP server. To configure, enter the Server IP Address.
4. File Name: Specifies the name of the file (including the file extension) that has to be retrieved from the device. To
configure, enter the File Name with extension.
5. File Type: Specifies the file type that you want to retrieve from the device. You can retrieve any of the following file
types:
•
Config: Specifies the configuration files of the device.
•
Event Log: Specifies the Event Logs from the device.
•
Text Based Template Config: Specifies the Text Based Template Configuration (TBC) files of the device. TBC
template can be used to configure the parameters and retrieve the configuration to the device.
To configure, select the File Type from the drop down menu.
6. Click Retrieve.
:
• When the device is running with default factory settings, there is no Binary Configuration file present and hence it cannot
be retrieved.
• You can retrieve Event Logs only when they are generated by the device.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 4-11 Retrieve From Device by using TFTP
Device Management Using Web Interface
101