Setting The Ip Address With Scantool - Proxim ORiNOCO AP-800 Installation And Management Manual

2.6.2 Setting the IP Address with ScanTool

By using ScanTool, you can change the IP address of the device as explained below:
1. Power on, or reset the device
2. To download Proxim's ScanTool, log on to Proxim's support site at
with (Answer ID 1735). Upon successful download, double-click the ScanTool icon on the Windows desktop to launch
the program (if the program is not already running).
3. If your computer has more than one network adapter installed, you will be prompted to select the adapter that you
want ScanTool to use. You can use either an ethernet or a wireless adapter. Select an adapter and click OK. The Scan
List screen appears.
4. ScanTool scans the subnet and displays a list of detected devices in the Scan List. You can change your adapter setting
at any time by clicking the Select Adapter on the Scan List screen.
5. Locate the MAC address of the device you want to initialize from the Scan List.
:
• If device does not appear in the Scan List, click Rescan in the Scan List to update. If the device still does not appear in the
Troubleshooting
list, see
• Note that after rebooting the device, it may take up to five minutes for the device to appear in the Scan List.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 2-5 Scan List
for suggestions.
Installation and Initialization
http://support.proxim.com
and search for ScanTool
25