Proxim ORiNOCO AP-800 Installation And Management Manual page 171

DHCP Server-Status
To enable or disable the DHCP Server-Status, enter the following CLI commands.
DHCP Least-time
To configure the DHCP Least-time, enter the following CLI commands.
Server IP Pool Table
To configure the DHCP Server IP Pool Table parameters, enter the following CLI commands.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09(config-dhcp)# server-status ?
Possible completions:
disable(1)/dhcpserver(2)
AP-00:7D:09(config-dhcp)# server-status 2
AP-00:7D:09(config)# exit
AP-00:7D:09# exit
AP-00:7D:09# show dhcp server-status
DHCP Server Status
AP-00:7D:09(config-dhcp)# max-lease-time ?
Possible completions:
<value(3600-172800)>
AP-00:7D:09(config-dhcp)# max-lease-time 3600
AP-00:7D:09(config-dhcp)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show dhcp max-leasetime
Maximum Lease Time
AP-00:7D:09(config-dhcp)# server-ippool-table
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 ?
Possible completions:
<[Enter]>
end-ipaddress
entry-status
entry-status-end
interface-type
start-ipaddress
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 entry-status 4
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 interface-type ?
Possible completions:
bridge(1)
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 interface-type 1
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 start-ipaddress 10.0.0.10
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 end-ipaddress 10.0.0.50
AP-00:7D:09(config-dhcp-ippool)# rowadd 0 entry-status 4
AP-00:7D:09(config-dhcp-ippool)#exit
AP-00:7D:09(config-dhcp)#exit
AP-00:7D:09(config)#exit
AP-00:7D:09# show dhcp server-ippool-tbl
// DHCP SERVER IP POOL TABLE CONFIGURATION //
INDEX 1
Interface : bridge
Start IP Address : 10.0.0.10
End IP Address : 10.0.0.50
Entry Status : enable
Device Configuration, Management and Monitoring using CLI
Server Status Configuration
: dhcpserver
Maximum Lease Time Configuration
: 3600
Execute this command
End Ip Address Configuration
Entry Status Configuration
Entry Status Configuration(Used for TBC)
Server Interface Type Configuration
Start Ip Address Configuration
Server Interface Type Configuration
171