2. The IP ARP Table contains the following information:
•
Index: Specifies the interface type.
•
Physical Address: Specifies the MAC address of a node on the network.
•
Net Address: Specifies the corresponding IP address of a node on the network.
•
Type: Specifies the type of mapping, that is, Dynamic or Static.
3. To view updated IP ARP entries, click Refresh.
4. Click Clear, to clear the IP ARP entries.
5.5.2 Internet Control Message Protocol (ICMP) Statistics
The ICMP Statistics attributes enable you to monitor the message traffic that is received and transmitted by the device.
1. To view ICMP statistics, navigate to MONITOR > Network Layer > ICMP Statistics. The ICMP Statistics screen
appears.
2. The ICMP Statistics screen contains the following information:
•
In Msgs/Out Msgs: Specifies the number of ICMP messages that are received/transmitted by the device.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 5-8 IP ARP Statistics
Figure 5-9 ICMP Statistics
Device Monitoring Using Web Interface
121