Optional Accessories; Installation Procedure; Install The Antennas - Proxim ORiNOCO AP-800 Installation And Management Manual

2.4 Optional Accessories

Proxim recommends you to use the following optional accessories:

2.5 Installation Procedure

This section describes the procedure to install and mount the device.
For Regulatory Information and latest product updates, including firmware and the MIBs, Proxim
recommends you to visit its support site at http://support.proxim.com.
Perform the following steps to install and mount the device.

2.5.1 Install the Antennas

The omni-directional antennas supplied with the product do not require any professional installation.
: Optionally, you can use the Range Extended Antenna (REA), which has 3 x RP SMA plug, that can be easily connected
to the device.
If the regular outdoor antennas connected via a pigtail conversion cable, offering a standard connector type for antenna
connection, are used, then professional installation is required.
Follow these steps to assemble the antennas:
1. Hand-tighten the antennas clockwise, onto the outer connectors of the device until they are firmly attached.
2. Position the antennas as close to the horizontal surface (ceiling or wall), so as to get the maximum signal coverage of
the omni-directional antenna.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
What's in the Kit
110-220V worldwide Power
Adapter
Range Extender Antenna
(REA)
Gigabit Ethernet PoE
Installation and Initialization
Image
20