Quality Of Service (Qos) - Proxim ORiNOCO AP-800 Installation And Management Manual

1. Configure the following parameters:
•
MAC Address: Specifies the MAC Address of a wireless station being added. To configure, enter the MAC
address of the wireless station.
•
Comment: Specifies any comment to be entered in the Comment box.
•
Entry Status: Specifies the entry status of the added wireless station. By default, the Entry Status for a wireless
station is enabled. To configure, select Enable or Disable from the drop down menu.
2. Click Add to add the new wireless station configured.
:
• The maximum number of MAC addresses that you can add is 1024.
• For a single VAP, Local MAC-ACL authentication and RADIUS MAC authentication cannot be enabled at the same time.

3.6 Quality of Service (QoS)

The device supports Wi-Fi Multimedia (WMM), also known as Wireless Multimedia Extensions (WME), which is a solution for
QoS functionality based on the IEEE 802.11e specification. WMM defines enhancements to the Media Access Control (MAC)
for wireless LAN applications with Quality of Service requirements, which include transport of voice and video traffic over IEEE
802.11 wireless LANs.
The enhancements are in the form of changes in protocol frame formats (addition of new fields and information elements)
addition of new messages, definition of new protocol actions, channel access mechanisms (differentiated control of access to
medium), network elements (QoS/WME aware APs, Stations), and configuration management.
WME supports Enhanced Distributed Channel Access (EDCA) for prioritized QoS services. The WMM/QoS feature can be
enabled or disabled per VAP.
The various QoS features supported by the device are described in the following sections:
• Enhanced Distributed Channel Access (EDCA)
• 802.1d to IP DSCP Mapping Table
• 802.1d to 802.1p Mapping Table
• QoS Profile
• QoS Policy
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 3-23 MAC ACL Add Row
Device Configuration Using Web Interface
65