Proxim ORiNOCO AP-800 Installation And Management Manual page 95

The Licensed Features screen contains the following information:
•
Product Description: Specifies the description of the device.
•
Number of Radios: Specifies the number of radios that the device is licensed to operate.
•
Number of Ethernet Interfaces: Specifies the number of ethernet interfaces available on the device.
•
Radio 1 Allowed Frequency Band: Specifies the operational wireless frequency band supported by the device on
Radio 1.
•
Radio 2 Allowed Frequency Band: Specifies the operational wireless frequency band supported by the device on
Radio 2.
: Radio 2 is applicable only to AP-8000.
•
Maximum Output Bandwidth: Specifies the maximum output bandwidth limit of the device. It is represented in
Mbps.
•
Maximum Input Bandwidth: Specifies the maximum input bandwidth limit of the device. It is represented in Mbps.
: The Input and Output Bandwidth features are referred with respect to the wireless interface. That is, input
bandwidth refers to the data received on the wireless interface and output bandwidth refers to the data sent
out of the wireless interface.
•
Maximum Aggregate Bandwidth: Specifies the cumulative bandwidth of the device which is the sum of configured
output and input.
•
Product Family: Specifies the product family of the device.
•
Product Class: Specifies the product class of the device. It can be indoor or outdoor product based on this parameter.
•
Allowed Operations Modes of Radio1: Specifies the operational modes allowed on the wireless interface (radio) 1.
•
Allowed Operations Modes of Radio2: Specifies the operational modes allowed on the wireless interface (radio) 2.
: Radio 2 is applicable only to AP-8000
•
MAC Address of the Device: Specifies the MAC address of the device.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 4-3 Licensed Features
Device Management Using Web Interface
95