Managing And Monitoring Capabilities; Web (Http/Https) Interface; Command Line Interface (Cli) (Terminal Emulators) - Proxim ORiNOCO AP-800 Installation And Management Manual

1.4 Managing and Monitoring Capabilities

A Network Administrator can use the following interfaces to configure, manage and monitor the device.
•

Web (HTTP/HTTPS) Interface

•
Command Line Interface (CLI) (Terminal Emulator Programs)
•
Simple Network Management Protocol (SNMP) v1/v2c/v3
•
ProximVision ES (PVES) [v2.3 and above]
1.4.1 Web (HTTP/HTTPS) Interface
The HTTP interface provides an easy access to configuration settings and network statistics from any computer on the
network. You can access the HTTP Interface via your LAN (switch, hub and so on), internet, or with an ethernet cable
connected directly to your computer's ethernet Port.
HTTPS interface provides an HTTP connection over a Secure Socket Layer (SSL). HTTPS allows the user to access the device in
a secure fashion using SSL over port 443. The device supports SSLv3 with a 128-bit encryption certificate maintained by the
device for secure communication between the device and the HTTP client. All communications are encrypted using the server
and the client-side certificate.

1.4.2 Command Line Interface (CLI) (Terminal Emulators)

The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and
parameters to configure, manage and monitor the device. You can enter command statements, composed of CLI commands
and their associated parameters. Statements may be issued from the keyboard for real time control, or from scripts that
automate the configuration. For example, when downloading a file, an administrator enters the download CLI Command
along with the IP Address, file name, and file type parameters.
1.4.2.1 HyperTerminal
You can access the CLI over a HyperTerminal serial connection. HyperTerminal is a program that you can use to connect to
other Computers, Telnet Sites, Bulletin Board Systems (BBS), Online Services, and Host Computers, by using either a modem
or a null modem cable.
If you are using RS-232 cable, verify the following information in the HyperTerminal serial port setup:
: If you are using Windows 7 operating system, then use Terminal Emulator programs for serial connection.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Port
Baud Rate 115200
Data 8-bit
Parity None
Stop 1-bit
Flow Control None
COM1 (default)
Introduction
13