Home Page; Commit - Proxim ORiNOCO AP-800 Installation And Management Manual

2.9 Home Page

Upon successful login, the Home Page screen appears.
The home page contains the following information:
•
Device Description: The device description is displayed on the top-right corner of the home page. It displays the
logged in user type and the device name along with the latest firmware version.
•
System Summary: The System Summary screen displays the summary of system information such as System Name, IP
Address, Radio Mode, Interface Status, Event Log and so on.
•
COMMIT: See
• Reboot
REBOOT: See
•
HOME: Displays the System Summary screen.
•
CONFIGURATION: The CONFIGURATION tab allows the user to configure the set of parameters required for a device
to be operational and establish link in the network. For more details, see
•
MANAGEMENT: The MANAGEMENT tab allows the user to manage the device. For more details, see
Management Using Web
•
MONITOR: The MONITOR tab allows the user to monitor the device. For more details, see
Web Interface.

2.9.1 Commit

COMMIT operation is used to apply the configuration changes to the device. When changes are made to the configuration
parameters of the device, the changes will not take effect, until the COMMIT is clicked. Some parameters may require system
reboot for the changes to take effect. On clicking COMMIT, the system evaluates all the configuration dependencies and
displays the configuration status.
Before applying commit, the system displays a confirmation message, as shown in the following figure:
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 2-9 System Summary
Commit
Interface.
Installation and Initialization
Device Configuration Using Web
Device Monitoring Using
Interface.
Device
30