Hardware Specifications - Proxim ORiNOCO AP-800 Installation And Management Manual

Hardware Specifications

Category
Radio Module
Wireless Protocol
Frequency
Channel bandwidth
Modulation
Device Interface
LED Indicators
Antennas
Network Architecture Type
Transmit Power
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Single Radio Access Point (AP-800) / Dual Radio Access Point (AP-8000)
3x3 MIMO per radio
802.11a/n
802.11a
802.11g/n
802.11g
5.15 - 6.075 GHz*
2.4 - 2.483 GHz*
* Subject to Individual Country Regulations
20MHz and 40MHz for 802.11n
20MHz for 802.11a/b/g
MSC0 - MCS15 for 802.11n (6.5 Mbps -300 Mbps)
BPSK, QPSK, 16-QAM and 64-QAM for 802.11a and 802.11g (6 Mbps - 54 Mbps)
DSSS for 802.11b (1 Mbps -11 Mbps)
Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet
Antenna Connector: 3 RP-SMA connectors for AP-800
6 RP-SMA connectors for AP-8000
Power LED: When power is applied to the device, the Power LED lights up Green.
Ethernet: The color of the Ethernet LED indicates the speed of the Ethernet traffic:
RED : 100 Mbps
GREEN : 1000 Mbps
OFF : No link is available or Ethernet is not connected
Wireless LED: When in operational status, the Wireless LED will be in steady green. The
wireless LEDs will blink green when the wireless traffic is being transmitted or received.
3 Single-Band (AP-800) / 6 Dual-Band (AP-8000) Omni-Antennas and reverse SMA connector
with 3 dBi gain.
Infrastructure
Operational Transmit Power
Modes
20 MHz
802.11b 19
802.11a/g 17
802.11na/ng 16
Specification
(dBm)
40 MHz
-
-
14
Technical Specifications
227