Logging Onto The Web Interface - Proxim ORiNOCO AP-800 Installation And Management Manual

: The device automatically reboots after clicking OK.

2.7 Logging onto the Web Interface

Once the device is connected to your network, use a web browser to configure, manage and monitor the device. Enter the
device IP address (For example http://169.254.128.132) in the address bar.
: You can also log on to the Web Interface using ScanTool.
The user is prompted to enter the username and password. The default User Name is admin and Password is public. For
security purposes, it is recommended to change the default Password to restrict unauthorized access to the device.
•
Depending on the settings made during the device initialization, the IP address may be either a dynamic IP address
assigned by a network DHCP server or a static IP address which is manually configured. Refer to
information on how to determine the device's IP address and manually configure a new IP address.
•
If the connection is slow or unable to connect, use the Internet Explorer Tools option to ensure that you are not using
a proxy server for the connection.
•
If you are unable to log on to the configuration pages by using default user name and password, please check with
the administrator or follow
•
If using Internet Explorer, and you enter wrong password consecutively for three times, the HTTP session will get
disconnected. If case of other browsers, the login screen will reset until you enter the correct password.
•
In the Internet Explorer, to get best results, navigate to Tools > Internet Options > General. Click Settings in the
Browsing History and select "Every visit to the webpage".
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 2-7 Login Screen
Forced Reload
procedures.
Installation and Initialization
ScanTool
for
27