System; Information - Proxim ORiNOCO AP-800 Installation And Management Manual

Hide thumbs Also See for ORiNOCO AP-800:
Table of Contents

Advertisement

4.1 System

The System feature enables you to view and configure information about the device, Inventory Management and its Licensed
features.

4.1.1 Information

The Information feature provides you with basic system information such as System Name, System Description, Contact
Details and so on.
To view and configure system specific Information, do the following:
1. Navigate to MANAGEMENT > System > Information. The System Information screen appears.
.
2. In the System Information screen, you can view and configure the following details:
System Up-Time: Specifies a read-only parameter that represents the operational time of the device since its last
reboot.
System Description: Specifies a read-only parameter that provides description about the system, including the
device name, current version of the firmware and the current build number.
System Name: Specifies the name that is assigned to the device. To configure, enter a System Name. Note that
you can enter a name of maximum 64 characters.
Email: Specifies the email address of the person administering the device. To configure, enter an email address of
minimum 6 and maximum 32 characters in the Email box.
Phone Number: Specifies the phone number of the person administering the device. To configure, enter a phone
number of minimum 6 and maximum 32 characters in the Phone Number box.
Location: Specifies the location where the device is installed. To configure, enter a location name of minimum 0
and maximum 255 characters in the Location box.
GPS Longitude: Specifies the longitude at which the device is installed. To configure, enter a longitude value of
minimum 0 and maximum 255 characters (in the format required by your Network Management System) in the
GPS Longitude box.
GPS Latitude: Specifies the latitude at which the device is installed. To configure, enter a latitude value of
minimum 0 and maximum 255 characters (in the format required by your Network Management System) in the
GPS Latitude box.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 4-1 System Information
Device Management Using Web Interface
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orinoco ap-8000

Table of Contents