Clearing All Interface Statistics
To configure and clear all the interface statistics, enter the following CLI commands.
Following are the valid configurable values for clearing Interface Statistics:
•
ethernetIntf1(2)
•
bridgeStats(4)
•
arpTable(5)
•
wirelessIntf1(6)
•
wirelessIntf2(7)
•
learnTable(10)
•
rogueScanIntf1(11) -- To Clear Rogue Scan Statistics for Interface 1
•
rogueScanIntf2(12) -- To Clear Rogue Scan Statistics for Interface 2
6.6.4.3 Ethernet
To configure the ethernet interface parameters, enter the following CLI commands.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09(config)# network clear-interface-stats ?
Possible completions:
<none(1),ethernetIntf1(2),bridgeStats(4),arpTable(5),wirelessIntf1(6),wir
elessIntf2(7),learnTable(10),rogueScanIntf1(11),rogueScanIntf2(12)>
Clear Interface Statistics
-- For Ethernet Interface 1
-- To Clear Bridge Statistics
-- To Clear ARP table Entries
-- To Clear Wireless Statistics for Interface 1
-- To Clear Wireless Statistics for Interface 2
-- To Clear Learn Table Entries
AP-00:7D:09# show ethernet
// ETHERNET INTERFACE CONFIGURATION //
INDEX 1
MAC Address
: 00:e0:0c:00:7d:09
Operational Speed
: hundredMbit
Operational Tx Mode
: fullDuplex
Tx Mode and Speed
: auto
Device Configuration, Management and Monitoring using CLI
145