Figure 50: Qfx10K-12C-Dwdm Interfaces - Juniper QFX10016 Hardware Manual

Hide thumbs Also See for QFX10016:

Table of Contents

QFX10016 Switch Hardware Guide

Figure 50: QFX10K-12C-DWDM Interfaces

All optical properties are configured under the

set interfaces ot-x/x/x optics-options CLI command to set these options.

Perform MACsec configuration on the

macsec connectivity-association ca-name encryption-algorithm. Optical

transport network (OTN) related configurations also are done on the

Each of the six network ports can operate in one of three modulation formats; see

Table 29 on page

interface. Use the

interface using the set security