Show Spanning-Tree Statistics - Allied Telesis x510-28GTX Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS

show spanning-tree statistics

Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for all
spanning-tree instances, and all switch ports associated with all spanning-tree
instances.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show spanning-tree statistics
Syntax
Mode Privileged Exec
Usage To display BPDU statistics for all spanning-tree instances, and all switch ports
associated with all spanning-tree instances, use the command:
awplus#
Output Figure 17-13: Example output from show spanning-tree statistics
Port number = 915 Interface = port1.0.6
================================
% BPDU Related Parameters
% -----------------------
% Port Spanning Tree
% Spanning Tree Type
% Current Port State
% Port ID
% Port Number
% Path Cost
% Message Age
% Designated Root
% Designated Cost
% Designated Bridge
% Designated Port Id
% Top Change Ack
% Config Pending
% PORT Based Information & Statistics
% -----------------------------------
% Config Bpdu's xmitted
% Config Bpdu's received
% TCN Bpdu's xmitted
% TCN Bpdu's received
% Forward Trans Count
C613-50170-01 Rev B
show spanning-tree statistics
: Disable
: Rapid Spanning Tree Protocol
: Discarding
: 8393
: 393
: 20000000
: 0
: ec:cd:6d:20:c0:ed
: 0
: ec:cd:6d:20:c0:ed
: 8393
: FALSE
: FALSE
: 0
: 0
: 0
: 0
: 0
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
653