5.4 Parts Replacement
Procedure
5.4.1 Copyboard Glass
5.4.1.1 Removing Copyboard
Glass
1) Open the ADF.
2) Remove the 2 screws [1], and detach the right glass
retainer [2]; then, detach the copyboard glass [3].
[3]
F-5-36
When detaching the copyboard glass, take care not
to touch the white plate attached to its back. (Soiling
can cause lines in the image). If soiled, clean it using
lint free paper moistened with alcohol.)
0003-3121
[1]
[2]
5.4.2 Exposure Lamp
5.4.2.1 Removing the
Copyboard Glass
1) Open the ADF.
2) Remove the 2 screws [1], and detach the right glass
retainer [2]; then, detach the copyboard glass [3].
[3]
F-5-37
When detaching the copyboard glass, take care not
to touch the white plate attached to its back. (Soiling
can cause lines in the image). If soiled, clean it using
lint free paper moistened with alcohol.)
5.4.2.2 Removing the Right
Cover (upper)
1) Remove the 2 screws [1], and detach the right cover
(upper) [2].
[1]
F-5-38
Chapter 5
0003-5445
[1]
[2]
0003-8246
[2]
5-23