Setting The Snmp Group; Setting The Snmp User - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
# Set the public community to read privilege.
[3Com] snmp-agent community read public
# Set the private community to write privilege.
[3Com] snmp-agent community write private

9.2.4 Setting the SNMP Group

This configuration can be used to set and delete an SNMP group.
Perform the following operations in the system view.
Table 9-5 Set the SNMP group
Set an SNMP group
Delete an SNMP group

9.2.5 Setting the SNMP User

This configuration can be used to add or delete a new user to the SNMP group.
Perform the following operations in the system view.
Table 9-6 Set the SNMP user
Add a new user to the SNMP group
Operation
Operation
3Com Corporation
9-5
Chapter 9 SNMP Configuration
Command
snmp-agent group { v1 | v2c }
group-name [ read read-view ] [ write
write-view ] [ notify notify-view ] [ acl
acl-number ]
snmp-agent group { v1 | v2c }
group-name acl acl-number
snmp-agent group v3 group-name
[ authentication | privacy ] [ read
read-view ] [ write write-view ] [ notify
notify-view ] [ acl acl-number ]
snmp-agent group v3 group-name acl
acl-number
undo snmp-agent group { v1 | v2c }
group-name
undo snmp-agent
group-name [ authentication | privacy ]
Command
snmp-agent usm-user { v1 | v2c }
user-name group-name
acl-number ]
snmp-agent usm-user v3 user-name
group-name [ [ authentication-mode
{ md5 | sha } auth-password ] [ privacy
des56 priv-password
acl-number ]
group v3
[ acl
] ] [ acl