Show Dhcp Relay; Show Dhcp Server Counters; Show Dhcp Server Settings - 3Com OfficeConnect Remote 812 Cli User's Manual

show dhcp relay

Displays the current configuration and counters for both the primary and
secondary DHCP relay server.
show dhcp server Displays various counters for the DHCP Server.
counters
show dhcp server Displays the current settings for the DHCP Server.
settings
IP Address - IP address of the DHCP Server.


Max Hops - maximum hops to get to this server.


Status - enabled or disabled.


Request Sent to Server - number of requests sent to server.


Responses Received from Server - number of responses received from


the server.
Responses Received with Error - number of responses received that were


in error.
Lease Requests Received


Lease Accepts Received


Lease Renewals Received


Lease Refusals Received


Lease Releases Received


Unrecognized Packets Received


Lease Offers Transmitted


Lease Confirmations Transmitted


Renewal Refusals Transmitted


Lease Confirmations Transmitted


Requested Address Out of Range


Requested Address In Use


No Free Addresses


Status - Whether DHCP Server is active.


Start IP Address - First IP address in the pool of IP addresses that will be


handed out through DHCP.
End IP Address - Last IP address in the pool of IP addresses that will be


handed out through DHCP.
IP Mask - IP network mask that applies to the pool of IP addresses being


administered.
IP Router - IP address that the workstations should use as their default


gateway.
Lease - The number of seconds that an IP address will be allocated to a


workstation without having to be renewed.
Host Name - DNS host name of this unit.


Domain Name - Name of the DNS domain we exist in.


CLI Commands B-43