Color Balance Adjustment (Color Mode); Adjustment Of Smudged/Faint Text - Toshiba e-STUDIO281c Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

Color balance adjustment (Color Mode)

The color balance is adjusted by adjusting the density of each color. The adjustment is performed by

selecting its density area from the following: low density, medium density and high density.

Be sure that this adjustment be made after performing "3.6.1 Automatic gamma adjustment".

Procedure is same as that of "3.6.3 Gamma balance adjustment".

The smudged/faint text at the Black Mode is adjusted.

While pressing [0] and [5] simultaneously, turn the power ON.

Key in the codes to be adjusted and press the [START] button.

Key in the adjustment value. (To correct the value once keyed in, press [CLEAR] button.)

Press the [ENTER] or [INTERRUPT] button to store the value in memory. ? The equipment goes

back to the ready state.

For resetting the value, repeat step (2) to (4).

Let the equipment restart and perform printing job.

If the desired image has not been attained, repeat step (1) to (6).

When the value increases, the smudged text is improved.

When the value decreases, the faint text is improved.

Acceptable values: 0 to 9 (Default: 5)

1038-1 Medium

1039-1 Medium

1040-1 Medium

1041-1 Medium

e-STUDIO281c/351c/451c

Show Quick Links

Table of Contents

E-studio351c E-studio451c