Fuser Roller/Fuser Roller Bushing - Toshiba e-STUDIO2006 Service Manual

(5) While lifting up the rear side of the pressure
roller [4], remove the bushing [5].
(6) Take off the pressure roller [4] and bushing
[6].
4.8.8

Fuser roller/Fuser roller bushing

(1) Take off the separation fingers.
 P. 4-83 "4.8.6 Separation finger"
(2) Take off the pressure roller.
 P. 4-84 "4.8.7 Pressure roller"
(3) Remove 1 gear [1].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[4]
Fig. 4-226
[6]
Fig. 4-227
Fig. 4-228
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 85
[5]
[4]
[1]
DISASSEMBLY AND REPLACEMENT
4