Hv-Board / Motor-Fan; Cover-Assy-Front - Toshiba e-STUDIO477S Service Manual

3.2.13 HV-Board / Motor-FAN

(1) Remove the Cover-Side-L. (Refer to 3.2.4)
(2) Remove the two screws (silver) ① and remove the Stay-Assy-L ②
(3) Remove the three screws (silver) ③ and the two screws (black) ④ , disengage the
claw, and remove HV-Board ⑤ . Be careful not to lose the Spring-Contact ⑥ .
(4) Disconnect all cables from HV-Board ⑤ .
(5) Remove the two screws (silver/28mm) ⑦ , and remove the Motor-FAN ⑧ .
Note! Be careful to install the Motor-Fan in the proper direction..
⑦
②
④
③
①
45387101TH Rev.1
⑧
⑤
⑥
5
④

3.2.14 Cover-Assy-Front

(1) Remove the Cover-Side-L and the Cover–Side-R. (Refer to 3.2.4 / 3.2.5)
(2) Remove the scanner. (Refer to 3.2.6)
(3) Remove the Plate-Board-R-Assy. (Refer to 3.2.9)
(4) Remove the two screws (black) ①
(5) Remove the six screws (silver/8mm) ② , and remove the Cover-Assy-Front ③ .
②
③
3. Component replacement
①
②
①
3-11 /