Setting Copier Preferences; Applying Your Changes; Setting Up Auto Clear; Setting The Auto Power Save Feature - Toshiba GL-1020 Administrator's Manual

SETTING COPIER PREFERENCES

GL-1020 Administrator's Guide
The Copier Settings Page of the Device submenu allows you to
set a number of copier attributes.
1 Log in as an administrator.
2 Click the
Administration
3 Click the
Device
4 Click the
Copier

Applying Your Changes

When you have finished setting copier attributes, you must turn
the copier off and then back on to apply the changes.

Setting Up Auto Clear

This attribute specifies when the copier LCD touch screen
automatically returns to the default display and settings.
1 In the Copier Settings window, click the Auto Clear Attribute
drop-down menu.
2 Select a time interval between 15 seconds and 150 seconds
(2.5 minutes).
At the end of the selected time, the copier LCD touch screen
returns to the default display and settings.
3 Follow the instructions in
page 89.

Setting the Auto Power Save Feature

This attribute specifies how long the copier can remain inactive
before entering its power saving mode.
1 In the Copier Settings window, click the Auto Power Save
drop-down menu.
2 Select either Disabled or a time interval between 15 and 60
minutes.
At the end of the selected time, the copier enters the power
saving mode because of inactivity.
3 Click .
Save
4 Follow the instructions in
page 89.
tab.
subtab.
subtab.
Applying Your Changes
Applying Your Changes
on
on
89