User Password-Policy Min-Digit - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

user password-policy min-digit

Configures the minimum number of base-10 digits required for a valid password.
user password-policy min-digit number
Syntax Definitions
number
Defaults
parameter
number
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Specify 0 with this command to disable the minimum number of digits requirement.
•
The minimum number of digits requirement is specified as part of a global password policy that is
applied to all passwords when they are created or modified.
Examples
-> user password-policy min-digit 2
-> user password-policy min-digit 0
Release History
Release 6.6.1; command was introduced.
Related Commands
show user password-policy
MIB Objects
aaaAsaConfig
aaaAsaPasswordMinDigit
page 43-38
The minimum number of digits. The range is 0 to 7.
default
0
Displays the global password policy configuration for the switch.
OmniSwitch 6250 CLI Reference Guide
AAA Commands
November 2009