User Password-Expiration - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

AAA Commands

user password-expiration

Configures an expiration date for all user passwords stored locally on the switch or disables password
expiration.
user password-expiration {day | disable}
Syntax Definitions
day
disable
Defaults
parameter
day | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The user password-expiration command sets a default password expiration for users configured
locally on the switch.
•
Password expiration may be configured on a per-user basis through the
overrides the user password-expiration setting until the user password is changed or the user
password-expiration command is entered again.
Examples
-> user password-expiration 2
-> user password-expiration disable
Release History
Release 6.6.1; command was introduced.
Related Commands
user
show user password-expiration
show user password-policy
OmniSwitch 6250 CLI Reference Guide
The number of days before locally configured user passwords will
expire. The range is 1 to 150 days.
Disables password expiration for users configured locally on the switch.
default
disable
Configures entries in the local user database. May be used by a system
administrator to change any user's password in addition to configuring
user privileges or profile.
Displays the expiration date for passwords configured for user accounts
stored on the switch.
Displays the global password policy configuration for the switch.
November 2009
user command; the user setting
page 43-33