Figure 5-21: Select Start Recovery Command - Teledyne 440 System Manual

Figure 5-21: Select Start Recovery command

7. After a few moments the Automated System Recovery screen appears. Use ALT +A on your
keyboard to select Actions from the top left-hand corner
your keyboard to select Start Recovery if it is not already highlighted and press Enter
5-21).
If you have any difficulties with the system recovery procedure please do not use
the contact details on the Automated System Recovery screen and instead con-
tact Teledyne TSS.
DPN 402196 Issue 4.1
(Figure
NOTE
© Teledyne TSS
5 – Operating Software
5-20). Use the arrow keys on
(Figure
5- 35