Yamaha RCX222 User Manual page 164

10. "PROGRAM" mode
Contents of each item are shown below.
Item
No.
Name
Line
Chapter
4
Byte
RW/RO
Date
Time
Valid keys and submenu descriptions in "PROGRAM >DIR" mode are shown below.
Valid keys
Cursor key
( ↑ / ↓ )
Cursor key
(← / →)
Page key
(
F10
F11
F15
4-66
Indicates the serial number of the program. The number
of the program which is currently selected is highlighted
(reversed background).
Indicates the program name.
The " * " mark (reversed background) shows this
program is compiled and the object program exists.
The " s " mark (reverse background) shows an object
exists in the sequence program.
Shows the number of lines in the program.
Shows how many bytes of memory the program uses.
Indicates the program attribute.
RW : Reading or writing enabled.
RO : Reading only enabled; writing inhibited.
Shows the date when the program was made or edited.
Shows the time when the program was made or edited.
Menu
Selects the program or scrolls the screen vertically.
Switches between the program information display and
the date/time display.
Switches to other screens.
/ )
F1 NEW Registers a new program name.
F5 INFO Shows the number of bytes used for the entire program.
F6 COPY Copies the program.
F7 ERASE Erases the program.
F8 RENAME Renames the program.
ATTRBT Changes the program attribute.
OBJECT Shows the object program information.
EXAMPLE Automatically creates the program name "FUNCTION".
Description
Function