Table of Contents
Advertisement
11. "MANUAL" mode
11.2.7
Point data positions can be checked by actually moving the robot.
Refer to "9.7 Executing the point trace" earlier in this chapter for details.
n
NOTE
• In "AUTO>POINT" mode, pressing
• When "AUTO>POINT" mode was entered from "MANUAL>POINT" mode,
Chapter
4
[Procedure]
1) In "MANUAL>POINT" mode, press
mode.
11.2.8
Press
The data display on the screen does not change (same as "MANUAL>POINT" mode).
The 5-digit area on the left shows point numbers, with the currently selected point number
highlighted.
n
NOTE
• Point comments can be entered for point numbers having no data.
• A point comment can be up to 15 characters.
■ Entering a point comment (1)
MANUAL>POINT
————————————x———————y———————z———————r———
P7
P8
P9
COMNT :
[POS]
EDIT
4-98
Point data trace
"MANUAL>POINT" mode that was active before trace.
pressing
also returns to "MANUAL>POINT" mode.
Point comment input and editing
(COMMENT) in "MANUAL>POINT" mode.
= 100.00
250.00
=
= 122.62
-24.54
50.00
100.00
TEACH
JUMP
(MODIFY) returns to
(TRACE) to switch to "AUTO>POINT"
50%[MG][S0H0X]
0.00
0.00
0.00
0.00
[
]
0.00
0.00
VEL+
VEL-
Advertisement
Table of Contents
