Table of Contents
Advertisement
12.4.4
Clock setting
A clock function is provided in the controller for setting the date and time.
c
CAUTION
The clock used in the controller might differ from the correct time.
If this happens, set the correct time.
[Procedure]
1) Press
(CLOCK) in "SYSTEM>INIT" mode.
The present date and time are displayed.
■ Initializing the clock
SYSTEM>INIT>CLOCK
DATE,TIME :06/06/01,10:13:35
DATE
TIME
2) Select the item with
A confirmation message appears on the guideline.
3) Enter the date or time in the specified format and then press
Enter this data using
Valid keys
F1
F2
(DATE) or
to
,
Menu
DATE
Sets the year/month/day.
TIME
Sets the hours/minutes/seconds.
V9.00
(TIME).
and
.
Function
12. "SYSTEM" mode
.
4-249
Chapter
4
Advertisement
Table of Contents
