Table of Contents
Advertisement
12. "SYSTEM" mode
12.6.1
Data in the controller can be saved on an SD memory card. The data can then be loaded
into the controller from the SD memory card.
c
CAUTION
Do not remove the SD memory card while data is being saved on it or
loaded from it. Removing the card at that time might corrupt the data.
n
NOTE
Chapter
4
This controller allows handling subdirectories down to 8 levels of hierarchy
below the root directory. Operation to a subdirectory lower than this level is
not allowed.
n
NOTE
This controller supports only FAT12 and FAT16 file systems. If the files were
created on a PC, then the file names might differ from those displayed on
the PC.
[Inserting the SD memor y card]
Insert an SD memory card into the SD memory card slot on the front of the controller
until you hear a "click", while making sure the card is facing correctly (see below).
■ Inserting the SD memor y card
[Removing the SD memor y card]
Press in on the SD memory card installed in the slot until you hear a "click". The card
will then eject from the slot, so take it out of the slot.
4-258
SD memor y card
O P .2
!
SD memory card
Advertisement
Table of Contents
