Table of Contents
Advertisement
10. "PROGRAM" mode
10.3.3
[Procedure]
In "PROGRAM>DIR" mode, press
The following information on the selected program appears.
■ Program information
PROGRAM
Chapter
4
Source(use/sum)
Object(use/sum)
Sequence(use/sum)
Number of program
Number of points
Source (use/sum)
Object (use/sum)
Sequence (use/sum)
Number of program
Number of points
4-68
Director y information display
>DIR>INFO
=
=
=
=
=
Item
Displays a count of used bytes and bytes available for
source program and point data.
Displays a count of used bytes and bytes available for
object program.
Displays a count of used bytes and bytes available for
sequence object program. (8 bytes are used for one
circuit of sequence program.)
Displays the number of programs.
Displays the number of points that have been set. (28
bytes are used for one point.)
(INFO) to enter "PROGRAM>DIR>INFO" mode.
<TEST1
>
1316/364580 bytes
528/ 98304 bytes
0/
4096 bytes
5
124
Description
Advertisement
Table of Contents
