Table of Contents
Advertisement
10. "PROGRAM" mode
10.2.14
[Procedure]
1) In "PROGRAM>EDIT" mode, press
mode.
The message "Character string >" appears on the guideline.
2) Enter the character string you want to search for and press
Chapter
4
A maximum of 20 characters can be used.
■ Character string search
PROGRAM
———————————————————————————————————————————
Search starts from the cursor position towards the end of the program and stops at the
first matching character string.
■ Character string search
PROGRAM
———————————————————————————————————————————
SELECT
3) To continuously search for another character string, press
(FIND-).
Pressing
the end of the program.
Pressing
the top of the program.
In either case, the search stops at the first matching character string.
4-64
Searching a character string
>EDIT
1
1 '***** TEST2 PROGRAM *****
2
GOTO *_'
3 DO2(0)=0
4 WAIT DI3(4,3,2)=3
5 MOVE P,P0
'ORIGIN
Character string >MOV_
>EDIT
1
18
MOVE P,P1
19 A=1
20 TOTO *A
21 *T2
22 WAIT A=1
COPY
CUT
(FIND+) restarts the search from the current cursor position towards
(FIND-) restarts the search from the current cursor position towards
(FIND) to enter "PROGRAM>EDIT>FIND"
<TEST2
>
2
3
<TEST2
>
2
3
PASTE
BS
.
(FIND+) or
Advertisement
Table of Contents
