Fuel Tank Center Cover; Fuel Tank Left And Right Side Cover; Fuel Tank - Honda CB HORNET 160R 2015 Shop Manual

FRAME/BODY PANELS/EXHAUST SYSTEM

FUEL TANK CENTER COVER

Remove the following :
– Socket bolt (3 nos.)from fuel tank cap
After removing
– Screw (1 nos.) from fuel tank center cover rear side
fuel filler cap
– Trim clip (2 nos.) from fuel tank center cover front side
cover the fuel
tank opening
Unlock the fuel tank cap by using ignition key and remove
with masking
the fuel filler cap.
tape.
Press the fuel tank side cover inwards and release the fuel
center cover first from rear side and then from front side.
Installation of fuel tank center cover is in the reverse order
of removal.
FUEL TANK LEFT & RIGHT SIDE COVER
Remove the following :
– Fuel tank center cover
– Screws (4 nos. each) from both side covers
Disengage the rear garnish hook from fuel tank side covers.
Carefully liftup the side covers upwards and release from
fuel tank mountings.
Installation of fuel tank left & right side cover is in the
reverse order of removal.

FUEL TANK

Remove the fuel tank mounting bolts/washers (2 nos.).
While raising the fuel tank disconnect the fuel unit
Wipe the spilled
3P (White) connector.
gasoline off at
once.
Disconnect the breather pipe, fuel tube and canister hose
pipe from the fuel tank
After installation,
Pull back and remove the fuel tank.
turn the fuel
valve "ON", and
Installation of fuel tank is in the reverse order of removal.
make sure
Install the fuel tank left & right side cover.
that there are
no fuel leaks.
Install the fuel tank center cover.
2-4
FUEL TANK
BREATHER PIPE CANISTER HOSE PIPE
BOLT
WASHER
3P (WHITE)
CONNECTOR