Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
macro description
Use the macro description Interface Configuration mode command to enter
a description about which macros are applied to an interface. Use the no form
of this command to remove the description.
Syntax
macro description
no macro description
Parameters
text—Description text. The text can contain up to 160 characters.
Default Configuration
The command has no default setting.
Command Mode
Interface Configuration mode
User Guidelines
When multiple macros are applied on a single interface, the description text
is a concatenation of texts from a number of previously applied macros.
You can verify your setting by entering the show parser macro description
privileged EXEC modecommand.
Example
Switch(config) # interface gigabitethernet 1/0/2
Switch(config-if) #
Switch(config-if) #
Switch(config) # interface gi1/0/3
Switch(config-if) #
Switch(config-if) #
Switch #
show parser macro description
InterfaceMacro Description
-----------------------------------------------------------------
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\750_Macro.fm
text
macro apply dup
end
macro apply duplex $DUPLEX full $SPEED auto
end
Macro Commands
67
Advertisement
Table of Contents
