Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
The following table describes the significant fields shown in the display.
F i e ld
IP address
Hardware
address
Lease expiration
Type
show ip dhcp declined
Use the show ip dhcp declined EXEC command to display the specific one or
all the declined addresses on the Dynamic Host Configuration Protocol
(DHCP) server.
Syntax
show ip dhcp declined
Parameters
ip-address—Specifies the IP address.
Command Mode
EXEC mode
Example
Router> show ip dhcp declined
DHCP server enabled
IP address Hardware address
172.16.1.11 00a0.9802.32de
172.16.3.254 02c7.f800.0422
Router> show ip dhcp declined 172.16.1.11
DHCP server enabled
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
686
DHCP Server Commands
CLI\files\DCHP_Server.fm
D e sc r ip ti o n
The host IP address as recorded on the DHCP Server.
The MAC address or client identifier of the host as recorded
on the DHCP Server.
The lease expiration date of the host IP address.
The manner in which the IP address was assigned to the
host.
[ip-address]
Advertisement
Table of Contents
