Page 1: Cli Reference Guide
Series CLI Reference Guide FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\New Cover_Dell_Contax.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 – F O R P R O O F O N LY...
Page 2 Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Page 3: Table Of Contents
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm Contents Preface..............33 User Interface Commands ... . 41 enable ..........41 disable .
Page 4 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm banner login ........55 banner motd .
Page 5 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm service cpu-utilization ....... 86 show cpu utilization.
Page 6 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm sntp trusted-key ........113 sntp client poll timer .
Page 7 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show bootvar ........140 Auto-Update and Auto-Configuration .
Page 8 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm snmp-server user ....... . . 165 snmp-server filter.
Page 9 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show crypto certificate mycertificate ....193 11 Web Server Commands ... . . 195 ip http server .
Page 10 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm speed ..........214 autobaud .
Page 11 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm passwords history hold-time ......241 passwords lockout ....... . . 242 aaa login-history file .
Page 12 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm 17 Syslog Commands ....265 logging on ........265 Logging host .
Page 13 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm rmon table-size ........292 19 802.1x Commands .
Page 14 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm dot1x traps mac-authentication failure ....319 dot1x radius-attributes vlan......320 dot1x radius-attributes filter-id.
Page 15 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show interfaces advertise ......341 show interfaces description......342 show interfaces counters .
Page 16 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm 23 EEE Commands ....369 eee enable (global) ....... . 369 eee enable (interface).
Page 17 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm mac address-table static ......393 clear mac address-table ......394 mac address-table aging-time .
Page 18 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show sflow statistics ......421 29 LLDP Commands .
Page 19 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show lldp neighbors....... . 446 show lldp statistics .
Page 20 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm instance (MST) ........472 name (MST) .
Page 21 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm switchport general ingress-filtering disable ..507 switchport general acceptable-frame-type ... 508 switchport customer vlan ......509 switchport general forbidden vlan .
Page 22 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm ip igmp snooping querier ......529 ip igmp snooping querier address ....530 ip igmp robustness.
Page 23 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm clear gvrp statistics ....... . 551 show gvrp configuration .
Page 24 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show ip dhcp snooping binding ..... 575 ip arp inspection ........576 ip arp inspection vlan .
Page 25 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm 38 IP Addressing Commands ... . 599 address ......... . . 599 ip address dhcp .
Page 26 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm show hosts ........621 39 IPv6 Addressing Commands .
Page 27 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm tunnel source ........645 tunnel isatap query-interval .
Page 28 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm netbios-name-server ....... 666 netbios-node-type ....... . . 667 next-server .
Page 29 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm ip routing ......... 692 show ip route .
Page 30 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm class-map ........725 show class-map .
Page 31 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm qos trust (Interface) ....... . 753 qos cos .
Page 32: Cli\Files\Cli_Dell_Contaxtoc.fm
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Dell_ContaxTOC.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 0 1 2 - F O R P R O O F O N LY...
Page 33: Preface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm Preface About this Document This CLI Reference Guide describes how to use the CLI and a list of the CLI commands and their arguments. The CLI commands described in this document are organized according to feature groups in separate sections.
Page 34 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm Privileged users enter the Privileged EXEC mode directly using a password. This mode provides access to the device Configuration modes. The modes are described below. User EXEC Mode User EXEC After logging into the device, the user is automatically in command mode unless the user is defined as a privileged user.
Page 35: Starting The Cli
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm • Line Interface — Contains commands to configure the management connections. These include commands such as line speed, timeout Global Configuration mode command line is used to settings, etc. The Line Configuration command enter the mode.
Page 36: Cli Command Conventions
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm Configure the device and enter the necessary commands to complete the required tasks. When finished, exit the session with the quit or exit command. Accessing the CLI from Telnet Enter telnet and the IP address of the device. A User Name prompt is displayed.
Page 37: Entering Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm C o n v e n t i o n s D e s c r i p t io n Screen Display Indicates system messages and prompts appearing on the console. When a parameter is required to define a range...
Page 38: Negating The Effect Of Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm recalled, reviewed, modified, and reissued. This buffer is not preserved across device resets. The keys that can be used to access the history buffer are described in Table By default, the history buffer system is enabled, but it can be disabled at any time.
Page 39: Keyboard Shortcuts
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm Keyboard Shortcuts The CLI has a range of keyboard shortcuts to assist in entering the CLI commands. The following table describes these shortcuts: Table 1: Keyboard Keys K e y b o a r d K e y...
Page 40 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\CLI_Preface.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 41: User Interface Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm User Interface Commands enable The enable EXEC mode command enters the Privileged EXEC mode. Syntax privilege-level enable [ Parameters privilege-level—Specifies the privilege level at which to enter the system. (Range: 1– Default Configuration The default privilege level is 15.
Page 42: Disable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm disable The disable Privileged EXEC mode command leaves the Privileged EXEC mode and returns to the User EXEC mode. Syntax privilege-level disable [ Parameters privilege-level—Specifies the privilege level at which to enter the system.
Page 43: Configure
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Example The following example enters Privileged EXEC mode and logs in with username ‘admin’. Console> login User Name:admin Password:***** Console# configure The configure Privileged EXEC mode command enters the Global Configuration mode. Syntax terminal...
Page 44: Exit (Exec)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Syntax exit Command Mode All commands in configuration modes. Examples The following examples change the configuration mode from Interface Configuration mode to Privileged EXEC mode. Console(config-if)# exit Console(config)# exit Console# Router(config-if)# exit Router(config)# exit...
Page 45: End
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm The end command ends the current configuration session and returns to the Privileged EXEC mode. Syntax Command Mode All configuration modes Example The following examples end the Global Configuration mode session and return to the Privileged EXEC mode.
Page 46: History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Help may be requested at any point in a command by entering a question mark ' '. If nothing matches the currently entered incomplete command, the help list is empty. This indicates that there is no command matching the input as it currently appears.
Page 47: History Size
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Example The following example enables the command history function for Telnet Console(config)# line telnet Console(config-line)# history history size The history size Line Configuration mode command changes the command history buffer size for a particular line. Use the no form of this command to reset the command history buffer size to the default value.
Page 48: Terminal History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Example The following example changes the command history buffer size to 100 entries for a particular line Console(config)# line telnet Console(config-line)# history size terminal history The terminal history EXEC mode command enables the command history function for the current terminal session.
Page 49: Terminal History Size
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm terminal history size The terminal history size EXEC mode command changes the command history buffer size for the current terminal session. Use the no form of this command to reset the command history buffer size to the default value.
Page 50: Terminal Datadump
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm terminal datadump The terminal datadump EXEC mode command enables dumping all the output of a show command without prompting. Use the no form of this command to disable dumping. Syntax terminal datadump terminal no datadump Default Configuration Dumping is disabled.
Page 51: Show History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Syntax debug-mode Command Mode Privileged EXEC mode Example The following example enters Debug mode. Console# debug-mode show history The show history EXEC mode command lists commands entered in the current session. Syntax show history...
Page 52: Show Privilege
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm 15:29:03 Jun 17 2005 Console# show history show version show clock show history 3 commands were logged (buffer size is 10) show privilege The show privilege EXEC mode command displays the current privilege level.
Page 53: Banner Exec
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Command Mode All configuration modes Example The following example executes the show vlan Privileged EXEC mode command from Global Configuration mode. Example Console (Config)# do show vlan Vlan Name Ports Type Authorization ---- ---- --------------------------- --------...
Page 54 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Parameters d—Delimiting character of your choice—a pound sign (#), for example. • You cannot use the delimiting character in the banner message. • message-text—The message must start in a new line. You can enter multi- line messages.
Page 55: Banner Login
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm $(location) Displays the system location string. $(mac- Displays the base MAC address of the device. address) Use the no exec-banner line configuration command to disable the EXEC banner on a particular line or lines.
Page 56 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm • message-text—Message text. The message must start on a new line. You can enter multi-line messages. You can include tokens in the form of $(token) in the message text. Tokens are replaced with the corresponding configuration variable.
Page 57: Banner Motd
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Use the no login-banner line configuration command to disable the Login banner on a particular line or lines. Example The following example sets a Login banner that uses tokens. The percent sign (%) is used as a delimiting character. Note that the $(token) syntax is replaced by the corresponding configuration variable.
Page 58 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Default Configuration Disabled (no MOTD banner is displayed). Command Mode Global Configuration mode User Guidelines Follow this command with one or more blank spaces and a delimiting character of your choice. Then enter one or more lines of text, terminating the message with the second occurrence of the delimiting character.
Page 59: Exec-Banner
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Device(config)# banner motd % Enter TEXT message. End with the character '%'. $(bold)Upgrade$(bold) to all devices begins at March 12 When the login banner is executed, the user will see the following banner: Upgrade to all devices begins at March 12...
Page 60: Login-Banner
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm console(config)# line ssh console(config-line)# exec-banner login-banner Use the login-banner command in Line Configuration mode to enable the display of login banners. Use the no form of this command to disable the display of login banners.
Page 61: Motd-Banner
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm motd-banner Use the motd-banner command in Line Configuration mode to enable the display of message-of-the-day banners. Use the no form of this command to disable the display of MOTD banners. Syntax motd-banner no motd-banner Parameters This command has no arguments or keywords.
Page 62 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\User_Interface.fm Syntax show banner motd show banner login show banner exec Parameters This command has no arguments or keywords. Command Mode EXEC mode Examples Device> show banner motd Banner: MOTD Line SSH: Enabled Line Telnet: Enabled...
Page 63: Macro Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm Macro Commands macro name Use the Macro Name Global Configuration mode command to create a user defined macro. Use the no form of this command to delete the macro definition. Syntax [macro-name] macro name...
Page 64 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm keywords are visible if you enter more than three macro keywords. The command can be anywhere within the macro. When creating a macro, do not use the exit or end commands or change the command mode using interface interface-id.
Page 65: Macro Apply
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm Switch(config-if) # macro apply duplex $DUPLEX ? WORDValue of the first keyword to replace <cr> Switch(config-if) # macro apply duplex $DUPLEX full $SPEED ? WORDValue of the second keyword to replace macro apply Use the macro apply interface configuration command to apply a macro to an interface or to apply and trace a macro configuration on an interface.
Page 66 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm keywords to designate values specific to the interface when creating a macro that requires the assignment of a unique value. Keyword matching is case sensitive. All matching occurrences of the keyword are replaced with the corresponding value. Any full match of a keyword, even if it is part of a large string, is considered a match and replaced by the corresponding value.
Page 67: Macro Description
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm macro description Use the macro description Interface Configuration mode command to enter a description about which macros are applied to an interface. Use the no form of this command to remove the description. Syntax...
Page 68: Macro Global
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm duplex ----------------------------------------------------------------- Switch(config) # interface gigabitethernet 1/0/2 Switch(config-if) # no macro description Switch(config-if) # Switch # show parser macro description InterfaceMacro Description ----------------------------------------------------------------- duplex ----------------------------------------------------------------- macro global Use the macro global Global Configuration command to apply a macro to a switch or to apply and trace a macro configuration on a switch.
Page 69: Macro Global Description
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm User Guidelines You can use the macro global trace macro-name Global Configuration mode command to apply and show the macros running on the switch or to debug the macro in order to locate any syntax or configuration errors.
Page 70: Show Parser Macro
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Macro.fm Default Configuration The command has no default setting. Command Mode Global Configuration mode User Guidelines When multiple global macros are applied to a switch, the global description text is a concatenation of texts from a number of previously applied macros.
Page 71: System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm System Management Commands ping Use the ping command to send ICMP echo request packets to another node on the network. Syntax {ipv4-address | hostname} [size packet_size] [count packet_count] ping [ip] [timeout time_out] {ipv6-address | hostname} [size packet_size] [count...
Page 72 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Command Mode EXEC mode User Guidelines Press Esc to stop pinging. Following are sample results of the ping command: Destination does not respond—If the host does not respond, a “no answer • from host” appears within 10 seconds.
Page 73 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm 64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms ----10.1.1.1 PING Statistics---- 4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 7/8/11 Console> ping ip yahoo.com Pinging yahoo.com [66.218.71.198] with 64 bytes of data: 64 bytes from 10.1.1.1: icmp_seq=0.
Page 74: Traceroute
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm 64 bytes from 3003::11: icmp_seq=4. time=0 ms ----3003::11 PING Statistics---- 4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 0/12/50 console> ping ipv6 FF02::1 Pinging FF02::1 with 64 bytes of data: 64 bytes from 3003::11: icmp_seq=1.
Page 75 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Parameters ip—Use IPv4 to discover the route. • • ipv6—Use IPv6 to discover the route. • ipv4-address—IPv4 address of the destination host. (Range: Valid IP address) • ipv6-address—IPv6 address of the destination host. •...
Page 76 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm The traceroute command sends out one probe at a time. Each outgoing packet can result in one or two error messages. A "time exceeded” error message indicates that an intermediate router has seen and discarded the probe.
Page 77: Telnet
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm The following table describes the significant fields shown in the display: F i e ld D e s c r i p t io n Indicates the sequence number of the router in the path to the host.
Page 78 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Parameters — ip-address • Specifies the destination host IP address. — • hostname Specifies the destination host name. (Length: 1-160 characters. Maximum label length: 63 characters.) — • port Specifies the decimal TCP port number or one of the keywords listed in the Ports table in the User Guidelines.
Page 79 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm A sample of this list follows. Note that the Ctrl-shift-6 sequence appears as ^^ on the screen. Console> ‘Ctrl-shift-6’ ? [Special telnet escape help] ^^ B sends telnet BREAK ^^ C sends telnet IP...
Page 80 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm O p tio n s D e s cr ip ti o n /stream Turns on stream processing, which enables a raw TCP stream with no Telnet control sequences. A stream connection does not process Telnet options...
Page 81: Resume
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm K e y w o r d D e s c r ip t i o n P o r t N u m b e r pim-auto-rp PIM Auto-RP pop2 Post Office Protocol v2...
Page 82: Hostname
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Default Configuration The default connection number is that of the most recent connection. Command Mode EXEC mode Example The following command switches to open Telnet session number 1. Console> resume hostname The hostname Global Configuration mode command specifies or modifies the device host name.
Page 83: Reload
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm reload The reload Privileged EXEC mode command reloads the operating system. Syntax stack-member-number] reload [slot Command Mode Privileged EXEC mode Parameters stack-member-number —Specifies the new master unit number. (Range: 1–8). If unspecified, reloads all the units.
Page 84: System Light
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Command Mode Global Configuration mode Example The following example forces the stack master to be unit 2. Console(config)# stack master unit system light Use the system light EXEC command to light LEDs on a specific unit.
Page 85: Show Switch
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm new-unit-number—The new unit number. (Range: • 1–8) Command Mode Global Configuration mode show switch The show switch EXEC mode command displays stack status information for the stack or stack member. Syntax stack-member-number show switch [ Parameters stack-member-number—...
Page 86: Service Cpu-Utilization
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Configured order: Unit 1 at Top, Unit 2 at bottom Console> show switch 1 Unit 1: MAC address: 00:00:b0:87:12:11 Master: Forced. Product: Fonseca 48. Software: 3.30 Uplink unit: 8. Downlink unit: 2. Status: Master Active image: image-1.
Page 87: Show Cpu Utilization
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example enables measuring CPU utilization. Console(config)# service cpu-utilization show cpu utilization The show cpu utilization Privileged EXEC mode command displays information about CPU utilization. Syntax show cpu utilization Command Mode Privileged EXEC mode...
Page 88: Service Cpu-Counters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Command Mode EXEC mode Example The following example clears the CPU traffic counters. Console# clear cpu counters service cpu-counters The service cpu-counters Global Configuration mode command enables traffic counting to and from the CPU. To disable counting, use the no form of this command.
Page 89: Show Users
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Command Mode EXEC mode User Guidelines Use the service cpu-counters command to enable traffic counting to and from the CPU. Example The following example displays the CPU traffic counters. Console# show cpu counters CPU counters are active.
Page 90: Show Sessions
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example displays information about the active users. Console# show users Username Protocol Location ---------- ----------- ------------ Serial John 172.16.0.1 Robert HTTP 172.16.0.8 Betty Telnet 172.16.1.7 172.16.1.6 show sessions The show sessions EXEC mode command displays open Telnet sessions.
Page 91: Show System
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example displays open Telnet sessions. Console# show sessions Connection Host Address Port Byte ---------- ------------- ---------- ----- ---- Remote router 172.16.1.1 172.16.1.2 172.16.1.2 The following table describes significant fields shown above.
Page 92 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example displays the system information. console# show system Unit Type ---- ---------------------- PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 PowerConnect 5524 Unit Main Power Supply Redundant Power Supply...
Page 93 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Unit Temperature (Celsius) Temperature Sensor Status ---- ------------------------- --------------- Unit Up time ---- --------------- 00,00:31:24 00,00:31:19 00,00:31:24 00,00:31:24 00,00:31:24 00,00:31:24 00,00:31:25 00,00:31:25 console# show system unit 2 System Type: PowerConnect 5548 System Up Time (days,hour:min:sec):...
Page 94: Show Version
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Fans Status: Unit Temperature (Celsius) Status ------------- ------------------- ------------- show version The show version EXEC mode command displays system version information. Syntax unit show version [unit Parameters unit unit — Specifies the unit number. (Range: 1–8)
Page 95: Show System Resources Routings
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm no system resources routing Parameters • routes—Specifies the maximum number of remote networks in the routing table. • hosts—Specifies the maximum number of directly attached hosts. • interfaces—Specifies the maximum number of IP interfaces.
Page 96: Show System Tcam Utilization
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example displays the system routing resources information. Console> show system resources routings Parameters Current value After reboot Value -------------- ---------------- ------------------- Hosts: Routes: IP Interfaces: show system tcam utilization The show system tcam utilization EXEC mode command displays the Ternary Content Addressable Memory (TCAM) utilization.
Page 97: Show System Defaults
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm show system defaults Use the show system defaults command to display system defaults. Syntax section show system defaults [ Parameters section—Show information for specific session only. Available values are: management, 802.1x, port, fdb, port-mirroring, spanning-tree, vlan, voice- vlan, ip-addressing, network-security and qos-acl.
Page 98 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm AAA HTTP authentication login: Local data base AAA HTTPS authentication login: Local data base Radius accounting: Disabled Radius: No server is defined Tacacs: No server is defined Syslog: No server is defined Logging: Enabled...
Page 99 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Mdix mode: auto LAGs: No LAG is defined Storm control: Disabled Storm control mode: unknown unicast, broadcast, multicast Port security: Disabled LLDP: Enabled LLDPDU Handeling: Filtering Jumbo frames: Disabled Port-Channel Load Balancing: Layer 2...
Page 100 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Maximum Vlans: 4094 Default VLAN: Enabled Default VLAN id: 1 GVRP: Disabled Port mode: undefined PVID: 1 VLAN membership: 1 # Voice vlan defaults Voice VLAN: Disabled Cos: 6 with no remark OUI table:...
Page 101: Show Tech-Support
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm qid: show tech-support Use the show tech-support command to display system and configuration information you can provide to the Technical Assistance Center when reporting a problem. Syntax config memory show tech-support [ Parameters Memory—Displays memory and processor state data.
Page 102: System Fans Always-On
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm User Guidelines Caution: Avoid running multiple show tech-support commands on a switch or multiple switches on the network segment. Doing so may cause starvation of some time sensitive protocols, like STP . The show tech-support command may timeout if the configuration file output takes longer to display than the configured session timeout time.
Page 103: Show System Fans
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Default Configuration Automatic mode; The system fan speed depends on the temperature of the device. Command Mode Global Configuration mode show system fans Use the show system fans EXEC command to view the fans’ status...
Page 104: Show System Id
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Parameters • unit —Specifies the unit number. (Range: 1–8) • tag—Specifies the device asset-tag. Default Configuration No asset tag is defined. The default unit number is the master unit number. Command Mode Global Configuration mode Example The following example assigns the asset-tag 2365491870 to the device.
Page 105 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm Example The following example displays the system identity information. Console> show system id Unit Service tag Serial number Asset tag ------ ------------- ------------- ----------- 89788978 8936589782 7843678957 3216523877 5621987728 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 106 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\System_Management.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 107: Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Clock Commands clock set The clock set Privileged EXEC mode command manually sets the system clock. Syntax day month month day year clock set ] | [ Parameters • hh:mm:ss—Specifies the current time in hours (military format), minutes, and seconds.
Page 108: Clock Source
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm clock source The clock source Global Configuration mode command configures an external time source for the system clock. Use the no form of this command to disable the external time source. Syntax clock source {sntp}...
Page 109: Clock Summer-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm no clock timezone Parameters • zone—The acronym of the time zone.(Range: Up to 4 characters) hours-offset—Hours difference from UTC. (Range: (-12)–(+13)) • • minutes-offset—Minutes difference from UTC. (Range: 0–59) Default Configuration Offset is 0.
Page 110 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm zone date month date year hh:mm month date year clock summer-time hh:mm [offset] no clock summer-time Parameters • zone—The acronym of the time zone to be displayed when summer time is in effect. (Range: Up to 4 characters) •...
Page 111: Sntp Authentication-Key
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm when it ends. All times are relative to the local time zone. The start time is relative to standard time. The end time is relative to summer time. If the starting month is chronologically after the ending month, the system assumes that you are in the southern hemisphere.
Page 112: Sntp Authenticate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Parameters • key-number—Specifies the key number. (Range: 1–4294967295) • key-value—Specifies the key value. (Length: 1–8 characters) Default Configuration No authentication key is defined. Command Mode Global Configuration mode Examples The following example defines the authentication key for SNTP .
Page 113: Sntp Trusted-Key
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm User Guidelines The command is relevant for both unicast and broadcast. Examples The following example enables authentication for received SNTP traffic. Console(config)# sntp authenticate Device(config)# sntp authentication-key 8 md5 ClkKey Device(config)# sntp trusted-key 8...
Page 114: Sntp Client Poll Timer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Examples The following example authenticates key 8. Console(config)# sntp trusted-key Device(config)# sntp authentication-key 8 md5 ClkKey Device(config)# sntp trusted-key 8 Device(config)# sntp authenticate sntp client poll timer The sntp client poll timer Global Configuration mode command sets the polling time for the Simple Network Time Protocol (SNTP) client.
Page 115: Sntp Broadcast Client Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm sntp broadcast client enable The sntp broadcast client enable Global Configuration mode command enables Simple Network Time Protocol (SNTP) broadcast clients. Use the no form of this command to disable SNTP broadcast clients. Syntax...
Page 116: Sntp Client Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Default Configuration The SNTP anycast client is disabled. Command Mode Global Configuration mode User Guidelines The polling time is configured with the sntp client poll timer Global Configuration mode command. Use the sntp client enable Interface Configuration mode command to enable the SNTP client on a specific interface.
Page 117: Sntp Client Enable (Interface)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm User Guidelines The sntp broadcast client enable Global Configuration mode command globally enables broadcast clients. The sntp anycast client enable Global Configuration mode command globally enables anycast clients. Example The following example enables the SNTP broadcast and anycast client on...
Page 118: Sntp Unicast Client Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm The sntp anycast client enable Global Configuration mode command globally enables anycast clients. Example The following example enables the SNTP broadcast and anycast client on an interface. Console(config-if)# sntp client enable sntp unicast client enable...
Page 119: Sntp Unicast Client Poll
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm sntp unicast client poll The sntp unicast client poll Global Configuration mode command enables polling for the Simple Network Time Protocol (SNTP) predefined unicast clients. Use the no form of this command to disable the polling for the SNTP client.
Page 120 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm ipv4-address ipv6-address ipv6z-address hostname no sntp server { Parameters • ipv4-address—Specifies the server IPv4 address. • ipv6-address—Specifies the server IPv6 address. A Link Local address (IPv6Z address) can be defined. — pv6z-address • Specifies the IPv6Z address to ping. The IPv6Z address...
Page 121: Sntp Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Polling time is configured with the sntp client poll timer Global Configuration mode command. ipv6-link-local-address>%<interface- The format of an IPv6Z address is: < name >. vlan<integer> | ch<integer> | isatap<integer> | interface-name = <physical-port-name> | 0 decimal-number>...
Page 122: Show Clock
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Command Mode Global Configuration mode Example The following example specifies that port 321 of the SNTP server is the UDP port. Console(config)# sntp port show clock The show clock EXEC mode command displays the time and date from the system clock.
Page 123 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Acronym is PST Offset is UTC-8 Summertime: Acronym is PDT Recurring every year. Begins at first Sunday of April at 2:00. Ends at last Sunday of October at 2:00. Offset is 60 minutes. DHCP timezone: Disabled Device>...
Page 124: Show Sntp Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm show sntp configuration The show sntp configuration Privileged EXEC mode command displays the Simple Network Time Protocol (SNTP) configuration on the device. Syntax show sntp configuration Command Mode Privileged EXEC mode Example The following example displays the device’s current SNTP configuration.
Page 125 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm Syntax show sntp status Command Mode Privileged EXEC mode Example The following examples display the SNTP servers status. Console# show sntp status Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Page 126 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Clock.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 127: Configuration/Image File Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Configuration/Image File Commands copy The copy Privileged EXEC mode command copies files from a source to a destination. Syntax source-url destination-url [snmp] copy Parameters • source-url—Specifies the source file location URL or source file reserved keyword to be copied.
Page 128 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm K e y w o r d S o u r c e o r D e s t i n a t io n boot Boot file. tftp:// Source or destination URL for a TFTP network server. The syntax for this alias is tftp://host/[directory]/filename.
Page 129 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm • interface-name—Specifies the outgoing interface name. The interface vlan integer integer isatap{integer name has the format: physical-port-name integer decimal- }.The subparameter has the format: { digit integer decimal-digit decimal-digit } | { has the range 0–9 If the egress interface is not specified, the default interface is selected.
Page 130 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm source-url Use the copy running-config command to load a configuration file from a network server to the running device configuration file. The commands in the loaded configuration file are added to those in the running configuration file as if the commands were typed in the command-line interface (CLI).
Page 131 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Loading file1 from 172.16.101.101: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK] Copy took 0:01:11 [hh:mm:ss] Copying an Image from a Server to Flash Memory The following example copies a system image named file1 from the TFTP server with an IP address of 172.16.101.101 to a non-active image file.
Page 132: Write Memory
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm write memory Use the write memory Privileged EXEC mode command to save the running configuration to the startup configuration file. Syntax write memory Parameters This command has no arguments or keywords. Command Mode Privileged EXEC mode...
Page 133: Pwd
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Parameters url—Specifies the location URL or reserved keyword of the file to be deleted. (Length: 1–160 characters) The following table displays keywords and URL prefixes: K e y w o r d S o u r c e o r D e s t in a t i o n flash:// URL of the flash memory.
Page 134: Dir
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm The dir Privileged EXEC mode command displays the list of files on a flash file system. Syntax [directory-path] Command Mode Privileged EXEC mode Example The following example displays the list of files on a flash file system...
Page 135: More
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm console# more The more Privileged EXEC mode command displays a file. Syntax more Parameters url—Specifies the location URL or reserved keyword of the source file to be displayed. (Length: 1–160 characters). The following table displays options for the URL parameter:...
Page 136 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm console# more running-config no spanning-tree gi1/0/ interface range 1-48 speed 1000 exit no lldp run line console exec-timeout 0 exit Use the cd Privileged EXEC mode command to change the current directory. new-directory Parameters new-directory—The new directory.
Page 137: Rename
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm console pwd flash:// console cd usb: console pwd usb://private console# cd flash:// console pwd flash:\\ console cd usb:// console pwd usb:// rename The rename Privileged EXEC mode command renames a file. Syntax url new-url...
Page 138: Boot System
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Example The following example renames the configuration file. Console# configuration.bak m-config.bak rename boot system The boot system Privileged EXEC mode command specifies the active system image file that is loaded by the device at startup.
Page 139: Show Running-Config
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Example The following example specifies that image-1 is the active system image file loaded by the device at startup. Console# boot system image-1 show running-config The show running-config Privileged EXEC mode command displays the current running configuration file contents.
Page 140: Show Startup-Config
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm show startup-config The show startup-config Privileged EXEC mode command displays the startup configuration file contents. Syntax show startup-config Command Mode Privileged EXEC mode Example The following example displays the startup configuration file contents. Console#...
Page 141 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm Parameters unit unit—Specifies the unit number. Command Mode EXEC mode Example The following example displays the active system image file that is loaded by the device at startup. Console# show bootvar Unit Image Filename...
Page 142 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Configuration_Image.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 143: Auto-Update And Auto-Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Auto-Update and Auto- Configuration boot host auto-config Use the boot host auto-config Global Configuration mode command to enable the support of auto configuration via DHCP . Use the no form of this command to disable DHCP auto configuration.
Page 144: Boot Host Dhcp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Syntax boot host auto-update no boot host auto-update Parameters This command has no arguments or key words. Command Mode Global Configuration mode Default Configuration Enabled by default. boot host dhcp Use the boot host dhcp Global Configuration mode command to force the mechanism used to download a configuration file at the next system startup.
Page 145: Boot Host Auto-Save
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm boot host auto-save Use the boot host auto-save Global Configuration mode command to enable automatic saving Running in Startup after download. Use the no form of this command restore default behavior. Syntax boot host auto-save...
Page 146 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Auto Config ----------- Config Download via DHCP: enable Next Boot Config Download via DHCP: force Auto Config State: Finished TFTP Server IP address: 1.2.20.2 Configuration filename: /config/configfile1.cfg Auto Update ----------- Image Download via DHCP: enabled...
Page 147 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Image Download via DHCP: enabled console# show boot Auto Config ----------- Config Download via DHCP: enable Next Boot Config Download via DHCP: default Auto Config State: Searching hostname in indirect configuration file Auto Update...
Page 148: Ip Dhcp Tftp-Server Ip Addr
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm console# show boot Auto Config ----------- Config Download via DHCP: enable Next Boot Config Download via DHCP: default Auto Update ----------- Image Download via DHCP: enabled Auto Update State: Downloading image file console# show boot...
Page 149: Ip Dhcp Tftp-Server File
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Parameters ip-addr IP—Address of TFTP server Default Configuration No IP address Command Mode Global Configuration mode ip dhcp tftp-server file Use the ip dhcp tftp-server file Global Configuration mode command to set the full file name on the TFTP server by a switch when it has not been received from the DHCP server.
Page 150 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Auto-Update.fm Command Mode EXEC Example console# show ip dhcp tftp server tftp server address active 1.1.1.1 from sname manual 2.2.2.2 file path on tftp server active conf/conf-file from option 67 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 151: Management Acl Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm Management ACL Commands management access-list The management access-list Global Configuration mode command configures a management access list and enters the Management Access-List Configuration command mode. Use the no form of this command to delete an access list.
Page 152: Permit (Management)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm For IPv6 management traffic that is tunneled in IPv4 packets, the management ACL is applied first on the external IPv4 header (rules with service field are ignored), and then again on the inner IPv6 header.
Page 153: Deny (Management)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm Parameters • interface-id:—Specify an interface ID. The interface ID can be one of the following types: Ethernet port, Port-channel or VLAN service • service — Specifies the service type. Possible values are: Telnet, SSH, HTTP, HTTPS and SNMP.
Page 154 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm Syntax [interface-id] [service service] deny {ipv4-address | ipv6-address/ipv6-prefix-length} [mask {mask deny ip-source | prefix-length}] [interface-id] [service service] Parameters • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port, Port-channel or VLAN •...
Page 155: Management Access-Class
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm management access-class The management access-class Global Configuration mode command restricts management connections by defining the active management access list. To disable management connection restrictions, use the no form of this command. Syntax name management access-class {console-only |...
Page 156: Show Management Access-Class
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm Parameters name—Specifies the name of a management access list to be displayed. (Length: 1–32 characters) Command Mode Privileged EXEC mode Example The following example displays the mlist management access list. Console# mlist show management access-list...
Page 157 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm Example The following example displays the active management access list information. Console# show management access-class Management access-class is enabled, using access list mlist D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 158 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Management_ACL.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 159: Snmp Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm SNMP Commands snmp-server Use the snmp-server server Global Configuration mode command to enable the device to be configured by SNMP . Use the no form of this command to disable this function. Syntax snmp-server server...
Page 160 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Management Protocol command. Use the no form of this command to remove the specified community string. Syntax string [view view-name] [ro | rw | su] {ipv4- snmp-server community address| ipv6-address} [mask | prefix-length] [type router | oob]...
Page 161 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm • group-name—Specifies the name of a group that should be configured using the command snmp-server group with v1 or v2 parameter (no specific order of the two command configurations is imposed on the user).
Page 162: Snmp-Server View
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm The snmp-server community-group command and snmp-server user command for v1 and v2 are equivalent. You should use the snmp-server community-group command when you want to configure the ipv4-address| ipv6-address management addresses. The Type keyword is used for a different purpose. Therefore, when defining an SNMP community, the administrator must indicate which tables are being configured.
Page 163: Snmp-Server Group
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm • excluded—Specifies that the view type is excluded. Default Configuration Default and DefaultSuper are the default view names. Command Mode Global Configuration mode User Guidelines This command can be entered multiple times for the same view record.
Page 164 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm groupname {v1 | v2 | v3 [noauth | auth | priv]} no snmp-server group [context name] Parameters • groupname—Specifies the group name. (Length: 1–30 characters) • v1—Specifies the SNMP Version 1 security model. v2—Specifies the SNMP Version 2 security model.
Page 165: Snmp-Server User
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm User Guidelines The command logical key is (groupname, snmp-version, security-level). For snmp-version v1/v2 the security-level is always noauth. The Router context is translated to "" context in the MIB. Example The following example attaches a group called user-group to SNMPv3 and assigns to the group the privacy security level and read access rights to a view called user-view.
Page 166 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm v3—Specifies that v3 is to be used. • • encrypted—Specifies whether the password appears in encrypted format. • auth—Specifies which authentication level is to be used. • md5—Specifies the HMAC-MD5-96 authentication level. • Sha—Specifies the HMAC-SHA-96 authentication level.
Page 167: Snmp-Server Filter
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm the remote engine ID is not configured first, the configuration command fails. Example snmp-server user ==================== console(config)# snmp-server user tom acbd v1 console(config)# snmp-server user tom acbd v2c console(config)# snmp-server engineid local default The engine-id must be unique within your administrative domain.
Page 168: Snmp-Server Host
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm oid-tree—Specifies the ASN.1 subtree object identifier to be included or • excluded from the view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a word, such as System.
Page 169 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Syntax { ipv4-address | ipv6-address| hostname} [traps | informs] snmp-server host [version {1 | 2c | 3 [auth | noauth | priv]}] community-string [udp-port port] [filter filtername] [timeout seconds] [retries retries] { ipv4-address | ipv6-address| hostname} [traps |...
Page 170 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm timeout seconds—Number of seconds to wait for an acknowledgment • before resending informs. The default is 15 seconds. The parameter is relevant only for informs. (Range: 1–300) • retries retries—Maximum number of times to resend an inform request, when a response is not received for a generated message.
Page 171: Snmp-Server Engineid Local
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm snmp-server engineID local The snmp-server engineID local Global Configuration mode command specifies the Simple Network Management Protocol (SNMP) engineID on the local device. Use the no form of this command to remove the configured engine ID.
Page 172: Snmp-Server Engineid Remote
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm As the EngineID should be unique within an administrative domain, the following guidelines are recommended: • For standalone devices, use the default keyword to configure the Engine • For stackable systems, configure an EngineID, and verify that it is unique within the administrative domain.
Page 173: Snmp-Server Enable Traps
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm a period or colon. If the user enters an odd number of hexadecimal digits, the system automatically prefixes the hexadecimal string with a zero. (Range: engineid-string5–32 characters. 9–64 hexadecimal digits) Default Configuration The EngineID is not configured.
Page 174: Snmp-Server Trap Authentication
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm snmp-server trap authentication Use the snmp-server trap authentication Global Configuration mode command to enable the device to send SNMP traps when authentication fails. Use the no form of this command to disable SNMP failed authentication traps.
Page 175: Snmp-Server Location
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Command Mode Global Configuration mode Example The following example configures the system contact point called Technical_Support. Console(config)# Technical_Support snmp-server contact snmp-server location Use the snmp-server location Global Configuration mode command to configure the system location string. Use the no form of this command to remove the location string.
Page 176: Show Snmp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Syntax variable-name name value name2 value2 snmp-server set ...] Parameters • variable-name—Specifies the SNMP MIB variable name, which must be a valid string. • name value—Specifies a list of name and value pairs. Each name and value must be a valid string.
Page 177 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Example The following example displays the SNMP communications status. Console# show snmp SNMP is enabled Community- Community-Access View name IP Address Type String -------------- ---------------- ------------ ---------- ---- public read only user-view Router private...
Page 178: Show Snmp Engineid
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm The following table describes the significant fields shown in the display. Field Description Community-string The community access string permitting access to the SNMP protocol. — Community-access The access type read-only, read-write, super access. IP Address The management station IP Address.
Page 179: Show Snmp Views
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm show snmp views Use the show snmp views Privileged EXEC mode command to display the configured SNMP views. Syntax viewname show snmp views [ Parameters viewname—Specifies the view name. (Length: 1–30 characters) Command Mode...
Page 180: Show Snmp Filters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Command Mode Privileged EXEC mode Example The following example displays the configured SNMP groups. Console# show snmp groups Name Security Views Model Level Read Write Notify ------------- ----- ---- ------- ------- ------- user-group priv Default ""...
Page 181: Show Snmp Users
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Syntax filtername show snmp filters [ Parameters filtername—Specifies the filter name. (Length: 1–30 characters) Command Mode Privileged EXEC mode Example The following example displays the configured SNMP filters. Console# show snmp filters Name OID Tree...
Page 182 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\SNMP.fm Example The following example displays the configured SNMP users. Console# show snmp users Auth Name Group name Remote Method ------ ------------ ------------------------ ------- John user-group 08009009020C0B099C075879 John user-group D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 183: Rsa And Certificate Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm RSA and Certificate Commands crypto key generate dsa The crypto key generate dsa Global Configuration mode command generates DSA key pairs. Syntax crypto key generate dsa Default Configuration DSA key pairs do not exist.
Page 184: Crypto Key Generate Rsa
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm crypto key generate rsa The crypto key generate rsa Global Configuration mode command generates RSA key pairs. Syntax crypto key generate rsa Default Configuration RSA key paris do not exist. Command Mode Global Configuration mode User Guidelines RSA keys are generated in pairs - one public RSA key and one private RSA key.
Page 185: Crypto Certificate Generate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Parameters rsa—Displays the RSA key. • • dsa—Displays the DSA key. Command Mode Privileged EXEC mode Example The following example displays the SSH public RSA keys on the device. Console# show crypto key mypubkey rsa...
Page 186 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm cn common-name—Specifies the fully qualified device URL or IP address. • (Length: 1–64 characters) • ou organization-unit—Specifies the organization-unit or department name. (Length: 1–64 characters) • or organization—Specifies the organization name. (Length: 1–64 characters) loc location—Specifies the location or city name.
Page 187: Crypto Certificate Request
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Example The following example generates a self-signed certificate for HTTPS. Console# crypto certificate generate key-generate crypto certificate request The crypto certificate request Privileged EXEC mode command generates and displays a certificate request for HTTPS.
Page 188: Crypto Certificate Import
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Before generating a certificate request, first generate a self-signed certificate using the crypto certificate generate Global Configuration mode command to generate the keys. The certificate fields must be re-entered. After receiving the certificate from the Certification Authority, use the crypto certificate import Global Configuration mode command to import the certificate into the device.
Page 189: Global Configuration Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Parameters number—Specifies the certificate number. (Range: 1–2) Command Mode Global Configuration mode User Guidelines To end the session, use a blank line. The imported certificate must be based on a certificate request created by the crypto certificate request privileged EXEC command.
Page 190: Crypto Certificate Export Pkcs12
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Finger print: DC789788 DC88A988 127897BC BB789788 crypto certificate export pkcs12 The crypto certificate export pkcs12 Privileged EXEC mode command exports the certificate and the RSA keys within a PKCS12 file. Syntax number crypto certificate...
Page 191: Crypto Certificate Import Pkcs12
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm BAgTASAxCjAIBgNVBAcTASAxCjAIBgNVBAMTASAxCjAIBgNVBAoTASAxCjAIBgNV BAsTASAwHhcNMDQwMjA3MTU1NDQ4WhcNMDUwMjA2MTU1NDQ4WjBJMQswCQYDVQQG EwJ1czEKMAgGA1UECBMBIDEKMAgGA1UEBxMBIDEKMAgGA1UEAxMBIDEKMAgGA1UE ChMBIDEKMAgGA1UECxMBIDBcMA0GCSqGSIb3DQEBAQUAA0sAMEgCQQCZXP/tk3e/ jrulfZw8q8T2oS5ymrEIes/sRJE8uahTBJqKu1VHqRYJR3VYa/03HSJ741w5MzPI iuWZzrbbuXAxAgMBAAEwDQYJKoZIhvcNAQEEBQADQQBQ+GTLeN1p1kARxI4C1fTU efig3ffZ/tjW5q1t1r5F6zNv/GuXWw7rGzmRyoMXDcYp1TaA4gAIFQCpFGqiSbAx -----END CERTIFICATE----- Bag Attributes localKeyID: 0C 75 81 77 5A 31 53 D1 FF 4E 26 BE 8D 4A FD 8B 22 9F 45 D4 Key Attributes: <No Attributes>...
Page 192 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Command Mode Privileged EXEC mode User Guidelines Use the passphrase that was exported by the crypto certificate export pkcs12 command. NOTE: This passphrase is saved for later exports. Example The following example imports the certificate and the RSA keys within a PKCS12 file.
Page 193: Show Crypto Certificate Mycertificate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm raMVTVSlSkJIvaPuXJxdZ279tDMwZffILBfKCJGACT5V5/4WEqDkrF+uuF9/oxm2 5SVL8TvUmXB/3hX4UoaXtxAhuyOdhh1kyyZSpw9BPPR/8bc/wUYERh7+7JXLKHpd ueeu3znfIX4dDeti8B3xYvvE8kGZjxFN1cC3zc3JsD0IVu1LkyiAa93P4LPEvAwG Fw1LqmGiiqw9JM/tzc6kYkZXylFzCrSVf2exP+/tEvM= -----END RSA PRIVATE KEY----- show crypto certificate mycertificate The show crypto certificate mycertificate Privileged EXEC mode command displays the device SSL certificates. Syntax number show crypto certificate mycertificate [ Parameters number—Specifies the certificate number.
Page 194 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RSA_and_Certificates.fm Finger print: DC789788 DC88A988 127897BC BB789788 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 195: Web Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Web Server Commands ip http server The ip http server Global Configuration mode command enables configuring and monitoring the device from a web browser. Use the no form of this command to disable this function.
Page 196: Ip Http Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Example The following example enables configuring the device from a web browser. Console(config)# ip http server ip http port The ip http port Global Configuration mode command specifies the TCP port used by the web browser interface. Use the no form of this command to restore the default configuration.
Page 197: Ip Http Secure-Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Syntax idle seconds ip http timeout-policy no ip http timeout-policy Parameters seconds—Specifies the maximum number of seconds that a connection is kept open if no data is received or response data cannot be sent out. (Range: 0–86400)
Page 198: Ip Http Secure-Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Parameters This command has no arguments or keywords. Default Disabled Command Mode Global Configuration mode User Guidelines Use the crypto certificate generate command to generate an HTTPS certificate. Example console(config)# ip http secure-server ip http secure-port To specify the TCP port to be used by the secure web browser interface, use the ip http secure-port Global Configuration mode command.
Page 199: Ip Https Certificate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Example console(config)# ip http secure-port 1234 ip https certificate The ip https certificate Global Configuration mode command configures the active certificate for HTTPS. Use the no form of this command to restore the default configuration.
Page 200: Show Ip Http
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm show ip http The show ip http EXEC mode command displays the HTTP server configuration. Syntax show ip http Command Mode EXEC mode Example The following example displays the HTTP server configuration. Console# show ip http...
Page 201 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm Port: 443 Interactive timeout: Follows the HTTP interactive timeout (10 minutes) Certificate 1 is active Issued by: www.verisign.com Valid from: 8/9/2003 to 8/9/2004 Subject: CN= router.gm.com, 0= General Motors, C= US Finger print: DC789788 DC88A988 127897BC BB789788...
Page 202 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Web_Server.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 203: Telnet, Ssh And Slogin Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm Telnet, SSH and Slogin Commands ip telnet server The ip telnet server Global Configuration mode command enables the device to be configured from a Telnet server. Use the no form of this command to disable the device configuration from a Telnet server.
Page 204: Ip Ssh Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm ip ssh port The ip ssh port Global Configuration mode command specifies the port used by the SSH server. Use the no form of this command to restore the default configuration. Syntax port-number ip ssh port...
Page 205: Ip Ssh Pubkey-Auth
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm Default Configuration Device configuration from an SSH server is enabled. Command Mode Global Configuration mode User Guidelines If encryption keys are not generated, the SSH server is in standby until the keys are generated. To generate SSH server keys, use the crypto key generate dsa and crypto key generate rsa Global Configuration mode commands.
Page 206: Crypto Key Pubkey-Chain Ssh
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm Example The following example enables public key authentication for incoming SSH sessions. Console(config)# ip ssh pubkey-auth crypto key pubkey-chain ssh The crypto key pubkey-chain ssh Global Configuration mode command enters the SSH Public Key-chain Configuration mode. This mode is used to manually specify other device public keys such as SSH client public keys.
Page 207: User-Key
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm kTwml75QR9gHujS6KwGN2QWXgh3ub8gDjTSq muSn/Wd05iDX2IExQWu08licglk02LYciz +Z4TrEU/9FJxwPiVQOjc+KBXuR0juNg5nFYsY 0ZCk0N/W9a/tnkm1shRE7Di71+w3fNiOA 6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f+ Rmt5nhhqdAtN/4oJfce166DqVX1gWmN zNR4DYDvSzg0lDnwCAC8Qh Fingerprint: a4:16:46:23:5a:8d:1d:b5:37:59:eb:44:13:b9:33:e9 user-key The user-key SSH Public Key-string Configuration mode command specifies which SSH public key is manually configured. Use the no form of this command to remove an SSH public key.
Page 208: Key-String
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm Please note that after entering this command, the existing key is deleted even if no new key is defined by the key-string command Exampe The following example enables manually configuring an SSH public key for SSH public key-chain bob.
Page 209 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm interactively configured next. Enter a row with no characters to complete the command. Use the key-string row SSH Public Key-string Configuration mode command to specify the SSH public key, row by row. Each row must begin with a key- string row command.
Page 210: Show Ip Ssh
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm show ip ssh The show ip ssh Privileged EXEC mode command displays the SSH server configuration. Syntax show ip ssh Command Mode Privileged EXEC mode Example The following example displays the SSH server configuration.
Page 211: Show Crypto Key Pubkey-Chain Ssh
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm F i e ld D e s c r i p t io n Cipher The encryption type (3DES, Blowfish, RC4) Auth Code The authentication Code (HMAC-MD5, HMAC-SHA1) show crypto key pubkey-chain ssh The show crypto key pubkey-chain ssh Privileged EXEC mode command displays SSH public keys stored on the device.
Page 212 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Telnet_SSH_and_Slogin.fm john Fingerprint ----------------------------------------------- 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8 Console# show crypto key pubkey-chain ssh username Username: bob Key: 005C300D 06092A86 4886F70D 01010105 00034B00 30480241 00C5E23B 55D6AB22 04AEF1BA A54028A6 9ACC01C5 129D99E4 Fingerprint: 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 213: Line Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm Line Commands line The line Global Configuration mode command identifies a specific line for configuration and enters the Line Configuration command mode. Syntax {console | telnet | ssh} line Parameters • console—Enters the console terminal line mode.
Page 214: Speed
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm speed The speed Line Configuration mode command sets the line baud rate. Use the no form of this command to restore the default configuration. Syntax speed no speed Parameters bps—Specifies the baud rate in bits per second (bps). Possible values are 2400, 4800, 9600, 19200, 38400, 57600, and 115200.
Page 215: Exec-Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm no autobaud Default Configuration Automatic baud rate detection is disabled. Command Mode Line Configuration mode User Guidelines To start communication using Autobaud, press the Enter key twice. Example The following example enables autobaud. Console(config)#...
Page 216: Show Line
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm User Guidelines To specify no timeout, enter the exec-timeout 0 0 command. Example The following example sets the HTTP session idle time interval before automatic logoff to 20 minutes. Console(config)# line console Console(config-line)# exec-timeout show line The show line EXEC mode command displays line parameters.
Page 217 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm Interactive timeout: Disabled History: 10 Baudrate: 9600 Databits: 8 Parity: none Stopbits: 1 Telnet configuration: Telnet is enabled. Interactive timeout: 10 minutes 10 seconds History: 10 SSH configuration: SSH is enabled. Interactive timeout: 10 minutes 10 seconds History: 10 D E L L C O N F I D E N T I A L –...
Page 218 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Line.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 219: Aaa Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm AAA Commands aaa authentication login The aaa authentication login Global Configuration mode command sets an authentication method applied during login. Use the no form of this command to restore the default authentication method. Syntax...
Page 220 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm none Uses no authentication. radius Uses the list of all RADIUS servers for authentication. tacacs Uses the list of all TACACS+ servers for authentication. Default Configuration The local user database is the default authentication method. This is the same as entering the command aaa authentication login local.
Page 221: Aaa Authentication Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm aaa authentication enable The aaa authentication enable Global Configuration mode command sets an authentication method for accessing higher privilege levels. To restore the default authentication method, use the no form of this command. Syntax...
Page 222 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Default Configuration The enable password command is the default authentication login method. This is the same as entering the command aaa authentication enable default enable. On a console, the enable password is used if a password exists. If no password is set, authentication still succeeds.
Page 223: Login Authentication
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm login authentication The login authentication Line Configuration mode command specifies the login authentication method list for a remote Telnet or console session. Use the no form of this command to restore the default authentication method.
Page 224: Ip Http Authentication
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Syntax {default | list-name} enable authentication no enable authentication Parameters • default—Uses the default list created with the aaa authentication enable command. • list-name—Uses the specified list created with the aaa authentication enable command. (Length: 1–12 characters).
Page 225: Show Authentication Methods
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm methods are used only if the previous method returns an error, not if it fails. Specify none as the final method in the command line to ensure that the authentication succeeds, even if all methods return an error. Select one or...
Page 226: Password
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Syntax show authentication methods Command Mode Privileged EXEC mode Example The following example displays the authentication configuration. Console# show authentication methods Login Authentication Method Lists --------------------------------- Default: Radius, Local, Line Console_Login: Line, None Enable Authentication Method Lists...
Page 227: Service Password-Recovery
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Syntax password [encrypted] password no password Parameters • password—Specifies the password for this line. (Length: 0–159 characters) • encrypted—Specifies that the password is encrypted and copied from another device configuration. Default Configuration No password is defined.
Page 228: Enable Password
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Default Configuration The full service password recovery is enabled by default. Command Mode Gobal Configuration mode User Guidelines This mechanism allows an end user, with physical access to the console port of the device, to enter the boot menu and trigger the password recovery process.
Page 229: Username
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Syntax [ level privilege-level ] { password | encrypted encrypted- enable password password } [ level level ] no enable password Parameters privilege-level • level —Level for which the password applies. If not specified the level is 15.
Page 230: Show User Accounts
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Parameters • name—The name of the user. (Range: 1–20 characters) • nopassword—No password is required for this user to log in. password—The authentication password for the user. (Range: 1–159) • password-encrypted—Encrypted password you enter, copied from another •...
Page 231: Aaa Accounting Login
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Example The following example displays information about the users local database. Console# show user accounts Username Privilege -------- --------- Robert Smith The following table describes the significant fields shown in the display: F i e ld...
Page 232 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm User Guidelines This command enables the recording of device management sessions (Telnet, serial and WEB but not SNMP). It records only users that were identified with a username (e.g. a user that was logged in with a line password is not recorded).
Page 233: Aaa Accounting Dot1X
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm aaa accounting dot1x To enable accounting of 802.1x sessions, use the aaa accounting dot1x Global Configuration mode command. Use the no form of this command to disable accounting. Syntax start-stop group radius aaa accounting dot1x...
Page 234 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm The software does not send “start”/“stop” messages if the port is force- authorized. The software does not send “start”/“stop” messages for hosts that are sending traffic on the guest VLAN or on the unauthenticated VLANs.
Page 235: Show Accounting
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm show accounting The show accounting EXEC mode command displays information about the accounting status. Syntax show accounting Command Mode EXEC mode Example The following example displays information about the accounting status. Console# show accounting Login: Radius 802.1x: Disabled...
Page 236: Passwords Strength-Check Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Command Mode Global Configuration mode User Guidelines The setting is relevant to local user passwords, line passwords, and enable passwords. The software checks the minimum length requirement when defining a password in an unencrypted format, or when a user tries to log in.
Page 237: Passwords Strength Minimum Character-Classes
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Command Mode Global Configuration mode User Guidelines If password strength is enabled, the user is forced to enter passwords that: • Contain characters from user-defined several character classes (uppercase letters, lowercase letters, numbers, and special characters available on a standard keyboard).
Page 238: Passwords Strength Max-Limit Repeated-Characters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Command Mode Global Configuration mode User Guidelines The setting is relevant to local users’ passwords, line passwords and enable passwords. The software checks the minimum length requirement when you define a password in an unencrypted format.
Page 239: Passwords Aging
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm User Guidelines The setting is relevant to local users’ passwords, line passwords and enable passwords. The software checks the maximum number of characters in the new password that can be repeated consecutively. passwords aging Use the passwords aging Global Configuration mode command to enforce password aging.
Page 240: Passwords History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm passwords history The passwords history Global Configuration mode command configures the number of password changes required before a password can be reused. Use the no form of this command to remove the requirement. Syntax...
Page 241: Passwords History Hold-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm passwords history hold-time The passwords history hold-time Global Configuration mode command configures the duration that a password is relevant for tracking passwords history. Use the no form of this command to return to the default configuration.
Page 242: Passwords Lockout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm passwords lockout The passwords lockout Global Configuration mode command enables user account lockout after a series of authentication failures. Use the no form of this command to disable the lockout feature. Syntax number passwords lockout...
Page 243: Aaa Login-History File
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Example The following example enables user account lockout after 3 successive authentication failures. Console(config)# passwords lockout aaa login-history file The aaa login-history file Global Configuration mode command enables writing to the login history file. Use the no form of this command to disable writing to the login history file.
Page 244: Set Line Active
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Syntax name set username active Parameters name—Specifies the user name: (Length: 1–20 characters) Default Configuration There is no default configuration for this command. Command Mode Privileged EXEC mode Example The following example reactivates user ‘Bob’.
Page 245: Set Enable-Password Active
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Command Mode Privileged EXEC mode Example The following example reactivates the virtual terminal for remote (Telnet) console access. Console(config)# set line telnet active set enable-password active The set enable-password active Privileged EXEC mode command reactivates a locked out local password.
Page 246: Show Passwords Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm show passwords configuration The show passwords configuration Privileged EXEC mode command displays information about the password management configuration. Syntax show passwords configuration Parameters Command Mode Privileged EXEC mode Example Console# show passwords configuration Passwords aging is enabled with aging time 180 days.
Page 247: Show Users Login-History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm The following table describes the significant fields shown in the display: F i e ld D e s c r ip t i o n Minimal length The minimal length required for passwords in the local database.
Page 248 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\AAA.fm Command Mode Privileged EXEC mode Example The following example displays information about the users’ login history. Console# show users login-history File save: Enabled. Login Time Username Protocol Location -------------------- ---------- ---------- ------------ Jan 18 2004 23:58:17...
Page 249: Radius Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm RADIUS Commands radius-server host Use the radius-server host Global Configuration mode command to specify a RADIUS server host. Use the no form of the command to delete the specified RADIUS server host. Syntax {ipv4-address | ipv6-address | ipv6z-address | hostname}...
Page 250 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm hostname—Specifies the RADIUS server host name. Translation to IPv4 • addresses only is supported. (Length: 1–158 characters. Maximum label length: 63 characters) • auth-port auth-port-number—Specifies the port number for authentication requests. If the port number is set to 0, the host is not used for authentication.
Page 251: Radius-Server Key
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm If retransmit is not specified, the global value is used. If key-string is not specified, the global value is used. If the source value is not specified, the global value is used. The default usage type is all.
Page 252: Radius-Server Retransmit
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm Parameters key-string—Specifies the authentication and encryption key for all RADIUS communications between the device and the RADIUS server. This key must match the encryption used on the RADIUS daemon. (Range: 0–128 characters) Default Configuration The key-string is an empty string.
Page 253: Radius-Server Source-Ip
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm Example The following example configures the number of times the software searches all RADIUS server hosts as 5. console(config)# radius-server retransmit radius-server source-ip Use the radius-server source-ip Global Configuration mode command to specify the source IP address used for communication with RADIUS servers.
Page 254: Radius-Server Source-Ipv6
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm radius-server source-ipv6 Use the radius-server source-ipv6 Global Configuration mode command to specify the source IPv6 address used for communication with RADIUS servers. Use the no form of this command to restore the default configuration.
Page 255: Radius-Server Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm radius-server timeout Use the radius-server timeout Global Configuration mode command to set the time interval during which the device waits for a server host to reply. Use the no form of this command to restore the default configuration.
Page 256: Show Radius-Servers
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm Parameters deadtime—Specifies the time interval in minutes during which a RADIUS server is skipped over by transaction requests. (Range: 0–2000) Default Configuration The default deadtime interval is 0. Command Mode Global Configuration mode Example The following example sets all RADIUS server deadtimes to 10 minutes.
Page 257 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm Example The following example displays RADIUS server settings. Console# show radius-servers Port Port IP address Auth Acct Time Retrans Dead Source Priority Usage time ---------- ---- ---- -------- ----- ----- ------- ------ ------ 172.16.1.1...
Page 258 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Radius.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 259: Tacacs+ Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm TACACS+ Commands tacacs-server host Use the tacacs-server host Global Configuration mode command to specify a TACACS+ host. Use the no form of this command to delete the specified TACACS+ host. Syntax ip-address hostname [single-connection] [port port-...
Page 260: Tacacs-Server Key
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm source {source}—Specifies the source IP to use for the communication. • 0.0.0.0 indicates a request to use the outgoing IP interface IP address. • priority priority—Specifies the order in which the TACACS+ servers are used, where 0 is the highest priority.
Page 261: Tacacs-Server Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm Parameters key-string—Specifies the authentication and encryption key for all TACACS+ communications between the device and the TACACS+ server. This key must match the encryption used on the TACACS+ daemon. (Length: 0–128 characters) Default Configuration The default key is an empty string.
Page 262: Tacacs-Server Source-Ip
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm Example The following example sets the timeout value to 30 for all TACACS+ servers. Console(config)# tacacs-server timeout tacacs-server source-ip Use the tacacs-server source-ip Global Configuration mode command to configure the source IP address to be used for communication with TACACS+ servers.
Page 263: Show Tacacs
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm show tacacs Use the show tacacs Privileged EXEC mode command to display configuration and statistical information for a TACACS+ server. Syntax ip-address show tacacs [ Parameters ip-address—Specifies the TACACS+ server name or IP address.
Page 264 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\TACACS.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 265: Syslog Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Syslog Commands logging on Use the logging on Global Configuration mode command to control error message logging. This command sends debug or error messages to a logging process, which logs messages asynchronously to designated locations for the process that generated the messages.
Page 266: Logging Host
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Example The following example enables logging error messages. Console(config)# logging on Logging host Use the logging host global configuration command to log messages to a syslog server. Use the no form of this command to delete the syslog server with the specified address from the list of syslogs.
Page 267: Logging Console
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Default No messages are logged to a syslog server host. Command Mode Global Configuration mode User Guidelines You can use multiple syslog servers. ipv6-link-local-address>%<interface- The format of an IPv6Z address is: < name >...
Page 268: Logging Buffered
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Parameters level—Specifies the severity level of logged messages displayed on the console. The possible values are: emergencies, alerts, critical, errors, warnings, notifications, informational and debugging. Default Configuration The default severity level is informational. Command Mode...
Page 269: Clear Logging
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Default Configuration The default severity level is informational. Command Mode Global Configuration mode User Guidelines All the syslog messages are logged to the internal buffer. This command limits the messages displayed to the user.
Page 270: Logging File
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm logging file Use the logging file Global Configuration mode command to limit syslog messages sent to the logging file to messages with a specific severity level. Use the no form of this command to cancel using the buffer.
Page 271: Aaa Logging
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Command Mode Privileged EXEC mode Example The following example clears messages from the logging file. Console# clear logging file Clear Logging File [y/n] aaa logging Use the aaa logging Global Configuration mode command to enable logging AAA login events.
Page 272: File-System Logging
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Example The following example enables logging messages related to AAA login events. Console(config)# aaa logging login file-system logging Use the file-system logging Global Configuration mode command to enable the logging of file system events. Use the no form of this command to disable logging file system events.
Page 273: Management Logging
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm management logging Use the management logging Global Configuration mode command to enable logging Management Access List (ACL) deny events. Use the no form of this command to disable logging management access list events. Syntax...
Page 274: Show Logging File
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Command Mode Privileged EXEC mode Example The following example displays the logging status and the syslog messages stored in the internal buffer. console# show logging Logging is enabled. Console Logging: Level info. Console Messages: 0 Dropped.
Page 275 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm Syntax show logging file Command Mode Privileged EXEC mode Example The following example displays the logging status and the syslog messages stored in the logging file. Logging is enabled. Console Logging: Level info. Console Messages: 0 Dropped.
Page 276: Show Syslog-Servers
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Syslog.fm 01-Jan-2010 05:55:03 :%SSHD-E-ERROR: SSH error: key_read: key_from_blob bgEgGnt9 z6NHgZwKI5xKqF7cBtdl1xmFgSEWuDhho5UedydAjVkKS5XR2... failed 01-Jan-2010 05:55:03 :%SSHD-E-ERROR: SSH error: key_from_blob: invalid key type. 01-Jan-2010 05:56:34 :%SSHD-E-ERROR: SSH error: bad sigbloblen 58 != SIGBLOB_LEN console# show syslog-servers Use the show syslog-servers Privileged EXEC mode command to display the syslog server settings.
Page 277: Rmon Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm RMON Commands show rmon statistics Use the show rmon statistics EXEC mode command to display RMON Ethernet statistics. Syntax {interface-id} show rmon statistics Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel.
Page 278 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm 128 to 255 Octets: 1 256 to 511 Octets: 1 512 to 1023 Octets: 0 1024 to max Octets: 0 The following table describes the significant fields displayed. F i e ld D es c r ip t i o n...
Page 279: Rmon Collection Stats
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm F i e ld D e s c r ip t i o n Fragments The total number of packets received, less than 64 octets in length (excluding framing bits but including FCS octets)
Page 280: Show Rmon Collection Stats
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm interface. Use the no form of this command to remove a specified RMON history group of statistics. Syntax [owner ownername] [buckets bucket-number] rmon collection stats index [interval seconds] index no rmon collection stats Parameters •...
Page 281: Show Rmon History
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Command Mode EXEC mode Example The following example displays all RMON history group statistics. Console# show rmon collection stats Index Interface Interval Requested Granted Owner Samples Samples ----- --------- -------- ------- --------- -------- gi1/0/1...
Page 282 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm errors—Displays error counters. • • other—Displays drop and collision counters. • period seconds—Specifies the period of time in seconds to display. (Range: 1–2147483647) Command Mode EXEC mode Example The following examples display RMON Ethernet history statistics for index 1...
Page 283 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Console# show rmon history 1 other Sample Set: 1 Owner: Me Interface: gi1/0/1 Interval: 1800 Requested samples: 50 Granted samples: 50 Maximum table size: 500 Time Dropped Collisions ------------------- ------ ---------- Jan 18 2005 21:57:00...
Page 284: Rmon Alarm
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm F i e ld D e s c r i p t io n Oversize The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
Page 285 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm • mib-object-id—Specifies the object identifier of the variable to be sampled. (Valid OID) • interval—Specifies the interval in seconds during which the data is sampled and compared with rising and falling thresholds. (Range: 1–4294967295) •...
Page 286: Show Rmon Alarm-Table
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Default Configuration The default method type is absolute. The default startup direction is rising-falling. If the owner name is not specified, it defaults to an empty string. Command Mode Global Configuration mode Example The following example configures an alarm with index 1000, MIB object ID...
Page 287: Show Rmon Alarm
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Example The following example displays the alarms table. Console# show rmon alarm-table Index Owner ----- ---------------------- ------- 1.3.6.1.2.1.2.2.1.10.1 1.3.6.1.2.1.2.2.1.10.1 Manager 1.3.6.1.2.1.2.2.1.10.9 The following table describes the significant fields shown in the display: F i e ld...
Page 288 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Console# show rmon alarm Alarm 1 ------- OID: 1.3.6.1.2.1.2.2.1.10.1 Last sample Value: 878128 Interval: 30 Sample Type: delta Startup Alarm: rising Rising Threshold: 8700000 Falling Threshold: 78 Rising Event: 1 Falling Event: 1 Owner: CLI...
Page 289: Rmon Event
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm F i e ld D e s c r i p t i o n Startup Alarm The alarm that may be sent when this entry is first set. If the first sample is greater than or equal to the rising threshold, and startup alarm is equal to rising or rising-falling, then a single rising alarm is generated.
Page 290: Show Rmon Events
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm trap—Specifies that an SNMP trap is sent to one or more management • stations by the device for this event. • log-trap—Specifies that an entry is generated in the log table and an SNMP trap is sent to one or more management stations by the device for this event.
Page 291: Show Rmon Log
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Example The following example displays the RMON event table. Console# show rmon events Index Descrip Type Community Owner Last time tion sent -------- -------- ----- ------ -------- ------ Errors Jan18 2006 23:58:17 High Log-...
Page 292: Rmon Table-Size
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm Syntax event show rmon log [ Parameters event—Specifies the event index. (Range: 0–65535) Command Mode EXEC mode Example The following examples display the RMON log table. Console# show rmon log Maximum table size: 500 (800 after reset)
Page 293 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm • log entries—Specifies the maximum number of log table entries. (Range: 20–100) Default Configuration The default history table size is 270 entries. The default log table size is 200 entries. Command Mode Global Configuration mode User Guidelines The configured table size takes effect after the device is rebooted.
Page 294 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\RMON.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 295: 802.1X Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm 802.1x Commands aaa authentication dot1x Use the aaa authentication dot1x Global Configuration mode command to specify one or more authentication, authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1x. Use the no form of this command to restore the default configuration.
Page 296: Dot1X System-Auth-Control
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm none as the final method in the command line to ensure that authentication succeeds even if all methods return an error. Example The following example uses the aaa authentication dot1x default command with no authentication.
Page 297 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Syntax {auto | force-authorized | force-unauthorized} dot1x port-control no dot1x port-control Parameters • auto—Enables 802.1x authentication on the interface and causes the port to transition to the authorized or unauthorized state based on the 802.1x authentication exchange between the device and the client.
Page 298: Dot1X Re-Authentication
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm dot1x re-authentication Use the dot1x reauthentication Interface Configuration mode command to enable periodic re-authentication of the client. Use the no form of this command to return to the default setting. Syntax dot1x reauthentication no dot1x reauthentication Parameters This command has no arguments or keywords.
Page 299: Dot1X Re-Authenticate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Parameters seconds—Number of seconds between re-authentication attempts. (Range: 30–4294967295) Default 3600 Command Mode Interface Configuration (Ethernet) mode Example console(config)# interface gigabitethernet 1/0/1 console(config-if)# dot1x timeout reauth-period 5000 dot1x re-authenticate The dot1x re-authenticate Privileged EXEC mode command manually initiates re-authentication of all 802.1x-enabled ports or the specified 802.1x-...
Page 300: Dot1X Timeout Quiet-Period
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm dot1x timeout quiet-period Use the dot1x timeout quiet-period Interface Configuration (Ethernet) mode command to set the time interval that the device remains in a quiet state following a failed authentication exchange (for example, the client provided an invalid password).
Page 301: Dot1X Timeout Tx-Period
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Console(config)# interface gigabitethernet 1/0/15 Console(config-if)# 3600 dot1x timeout quiet-period dot1x timeout tx-period Use the dot1x timeout tx-period Interface Configuration (Ethernet) mode command to set the time interval during which the device waits for a response to an Extensible Authentication Protocol (EAP) request/identity frame from the client before resending the request.
Page 302: Dot1X Max-Req
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm dot1x max-req Use the dot1x max-req Interface Configuration mode command to set the maximum number of times that the device sends an Extensible Authentication Protocol (EAP) request/identity frame (assuming that no response is received) to the client before restarting the authentication process.
Page 303: Dot1X Timeout Supp-Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm dot1x timeout supp-timeout Use the dot1x timeout supp-timeout Interface Configuration (Ethernet) mode command to set the time interval during which the device waits for a response to an Extensible Authentication Protocol (EAP) request frame from the client before resending the request.
Page 304: Dot1X Timeout Server-Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm dot1x timeout server-timeout Use the dot1x timeout server-timeout Interface Configuration (Ethernet) mode command to set the time interval during which the device waits for a response from the authentication server. Use the no form of this command to restore the default configuration.
Page 305: Show Dot1X
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm show dot1x Use the show dot1x Privileged EXEC mode command to display the 802.1x device or specified interface status. Syntax [interface interface-id] show dot1x Parameters interface-id—Specify an interface ID. The interface ID must be an Ethernet port.
Page 306 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Port Admin Oper Reauth Reauth Username Mode Mode Control Period ---- ---------- ------------ ------- ------ -------- gi1/0/ Auto Unauthorized Enable 3600 Clark Quiet period: 60 Seconds Tx period: 30 Seconds Max req: Supplicant timeout:...
Page 307 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm F i e ld D e s cr ip t i o n Username The username representing the supplicant identity. This field shows the username if the port control is auto. If the port is Authorized, it displays the username of the current user.
Page 308: Show Dot1X Users
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm show dot1x users Use the show dot1x users Privileged EXEC mode command to display active 802.1x authenticated users for the device. Syntax [username username show dot1x users Parameters username—Specifies the supplicant username (Length: 1–160 characters)
Page 309 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Example The following example displays 802.1x users. Switch# show dot1x users Port Username Session Auth VLAN Filter Time Method Address ------ ---------- ------------- -------- ------------- ---- ---- gi1/0/1 Bob 1d 03:08:58 Remote 0008.3b79.8787 gi1/0/2 John...
Page 310: Show Dot1X Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm show dot1x statistics Use the show dot1x statistics Privileged EXEC mode command to display 802.1x statistics for the specified interface. Syntax interface-id show dot1x statistics interface Parameters interface-id—Specifies an interface ID. The interface ID must be an Ethernet port.
Page 311: Clear Dot1X Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm The following table describes the significant fields shown in the display: F i e ld D es c r ip t i o n EapolFramesRx The number of valid EAPOL frames of any type that have been received by this Authenticator.
Page 312: Dot1X Auth-Not-Req
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Syntax interface-id clear dot1x statistics [ Parameters interface-id—Specify an Ethernet port ID.. Default Configuration Statistics on all ports are cleared. Command Mode Privileged EXEC mode Example The following example displays how to clear 802.1x statistics on all ports...
Page 313: Dot1X Host-Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm For a general port, the PVID can be an unauthenticated VLAN (although only tagged packets are accepted in the unauthorized state). Example The following example enables unauthorized devices access to VLAN 5. Console(config)# interface vlan...
Page 314: Dot1X Violation-Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm after success full authentication filtering is based on the source MAC address only. Port security on a port can’t be enabled in single-host mode and in multiple- sessions mode. It is recommended to enable reauthentication when working in multiple- sessions mode in order to detect User Logout for users that hadn’t sent...
Page 315: Dot1X Guest-Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Default Configuration Protect Command Mode Interface Configuration (Ethernet) mode User Guidelines The command is relevant for single-host mode. The command is not relevant for multiple-hosts mode. The command is relevant for multiple-sessions mode, but you should note that since PCs are sending traffic prior to successful 802.1X authentication,...
Page 316: Dot1X Guest-Vlan Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Command Mode Interface Configuration (VLAN) mode User Guidelines Use the dot1x guest-vlan enable Interface Configuration mode command to enable unauthorized users on an interface to access the guest VLAN. If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is unauthorized and leaves it when the port becomes authorized.
Page 317: Dot1X Guest-Vlan Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Command Mode Global Configuration mode User Guidelines This command is relevant if the guest VLAN is enabled on the port. Configuring the timeout adds delay from enabling 802.1X (or port up) to the time the device adds the port to the guest VLAN.
Page 318: Dot1X Mac-Authentication
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Example The following example enables unauthorized users on gigabitethernet port 1/0/1 to access the guest VLAN. Console(config)# gigabitethernet 1/0/ interface Console(config-if)# dot1x guest-vlan enable dot1x mac-authentication Use the dot1x mac-authentication Interface Configuration (Ethernet) mode command to enable authentication based on the station’s MAC address.
Page 319: Dot1X Traps Mac-Authentication Success
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Example The following example enables authentication based on the station’s MAC address on gigabitethernet port 1/0/1. Console(config)# gi1/0/1 interface Console(config-if)# dot1x mac-authentication mac-only dot1x traps mac-authentication success Use the dot1x traps mac-authentication success Global Configuration mode command to enable sending traps when a MAC address is successfully authenticated by the 802.1X mac-authentication access control.
Page 320: Dot1X Radius-Attributes Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Syntax dot1x traps mac-authentication failure no dot1x traps mac-authentication failure Parameters This command has no arguments or keywords. Default Default is disabled. Command Mode Global Configuration mode dot1x radius-attributes vlan Use the dot1x radius-attributes vlan Interface Configuration mode command, to enable user-based VLAN assignment.
Page 321: Dot1X Radius-Attributes Filter-Id
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Radius attributes are supported only in the multiple sessions mode (multiple hosts with authentication) When Radius attributes are enabled and the Radius Accept message does not contain the supplicant’s VLAN as an attribute, then the supplicant is rejected.
Page 322: Dot1X Radius-Attributes Errors
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm User Guidelines User based ACL/Qos-Policy assignment is supported only in 802.1x multiple sessions. The configuration of the parameter is allowed only when the port is Forced Authorized or Forced Unauthorized. dot1x radius-attributes errors Use the dot1x radius-attributes errors Global Configuration mode command to specify error handling for the Radius attributes feature.
Page 323: Show Dot1X Advanced
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Syntax dot1x legacy-supp-mode no dot1x legacy-supp-mode Parameters This command has no arguments or keywords. Default Legacy support is disabled. Command Mode Interface Configuration (Ethernet) mode User Guidelines The command causes 802.1x switch to send an Extensible Authentication Protocol (EAP)-request/identity frame from the authenticator (switch) each tx-period automatically, when in multiple session mode.
Page 324: Dot1X System-Auth-Control Monitor
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Example The following example displays 802.1x advanced features for the device. console# show dot1x advanced Guest VLAN: 3978 Unauthenticated VLANs: 91, 92 Interface Multiple Guest VLAN Legacy- Policy Hosts VLAN Authentication Assignment supp Mode...
Page 325: Show Dot1X Monitoring Result
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Parameters vlan vlan-id—Specifies the 802.1x Monitoring VLAN. If the parameter is omitted, the Default VLAN is used as the 802.1x Monitoring VLAN.(Range: Any manually created VLAN or the Default VLAN) Default Disabled Command Mode...
Page 326 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Port Ethernet port or port-channel Reject reason Reason in the case of failure. The following table describes the reasons. Time Supplicant Session time Table 1: Reject Reason Description Abbreviation Description ACL-DEL ACL was deleted by a user...
Page 327 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Table 1: Reject Reason Description VLAN-DYNAM VLAN sent by radius server can not be applied because it is a Dynamic VLAN VLAN-GUEST VLAN sent by radius server can not be applied because it is the Guest VLAN...
Page 328 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\802.1X.fm Switch# show dot1x monitoring Tom Username: Tom Port gi1/0/1 Quiet period: 60 Seconds Tx period: 30 Seconds Max req: Supplicant timeout: 30 Seconds Server timeout: 30 Seconds Session Time (HH:MM:SS): 08:19:17 MAC Address: 00:08:78:32:98:78...
Page 329: Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Ethernet Configuration Commands interface Use the interface Global Configuration mode command to configure an interface and enter interface configuration mode. Syntax interface interface-id Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel.
Page 330: Description
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Example console(config)# interface range gi1/0/1-20 description Use the description Interface Configuration (Ethernet, Port-channel) mode command to add a description to an interface. Use the no form of this command to remove the description. Syntax...
Page 331: Duplex
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm using auto-negotiation. Use the no form of this command to restore the default configuration. Syntax {10 | 100 | 1000 | 10000} speed no speed Parameters • 10—Forces10 Mbps operation. • 100—Forces 100 Mbps operation.
Page 332: Negotiation
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Syntax {half | full} duplex no duplex Parameters • half—Forces half-duplex operation. • full—Forces full-duplex operation. Default Configuration The interface operates in full duplex mode. Command Mode Interface Configuration (Port-channel) mode Example The following example configures gigabitethernet port 1/0/5 to operate in full duplex mode.
Page 333: Flowcontrol
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Parameters capability—Specifies the capabilities to advertise. (Possible values: 10h, • 10f, 100h,100f, 1000f). If unspecified, defaults to list of all the capabilities of the port. • Preferred—Specifies the master-slave preference: • Master—Advertise master preference •...
Page 334: Flowcontrol (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm off—Disables Flow Control. • Default Configuration Flow control is enabled. Command Mode Interface Configuration (Ethernet, Port-channel) mode User Guidelines Use the negotiation command to enable flow control auto. Example The following example enables Flow Control on port...
Page 335: Show Flowcontrol
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm User Guidelines This command only determines the global mode and does not enable/disable Flow Control on any interface. Flowcontrol must also be enabled on the specific interfaces required (they are enabled by default). Example The following example enables Flow Control in the mode of only receiving pause frames and not sending them.
Page 336: Mdix
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm mdix Use the mdix Interface Configuration (Ethernet) mode command to enable cable crossover on a given interface. Use the no form of this command to disable cable crossover. Syntax {on | auto} mdix no mdix Parameters •...
Page 337: Back-Pressure
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm back-pressure Use the back-pressure Interface Configuration (Ethernet) mode command to enable back pressure on a specific interface. Use the no form of this command to disable back pressure. Syntax back-pressure no back-pressure Default Configuration Back pressure is enabled.
Page 338: Clear Counters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Command Mode Global Configuration mode User Guidelines This command takes effect only after resetting the device. Example The following example enables jumbo frames on the device. Console(config)# port jumbo-frame clear counters Use the show interfaces counters EXEC mode command to display traffic seen by all the physical interfaces or by a specific interface.
Page 339: Set Interface Active
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm set interface active Use the set interface active EXEC mode command to reactivate an interface that was shut down. Syntax { interface-id } set interface active Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel.
Page 340: Show Interfaces Status
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Command Mode EXEC mode Example The following example displays the configuration of all configured interfaces: console# show interfaces configuration Flow Admin Back Mdix Port Type Duplex Speed control State Pressure Mode ------ --------- ------...
Page 341: Show Interfaces Advertise
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Example The following example displays the status of all configured interfaces. console# show interfaces status Flow Link Back Mdix Port Type Duplex Speed Neg ctrl State Pressure Mode ------ --------- ------ ----- -------- ---- ------ -------- --...
Page 342: Show Interfaces Description
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Examples The following examples display auto-negotiation information. Console# show interfaces advertise Port Type Operational Link Advertisement ---- ---------- ------ ------------------------------ gi1/0/1 1G-Copper Enable 1000f, 100f, 10f, 10h gi1/0/2 1G-Copper Enable 1000f gigabitethernet 1/0/1 Console#...
Page 343: Show Interfaces Counters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Command Mode EXEC mode Example The following example displays the description of all configured interfaces. Console# show interfaces description Port Descriptions gi1/0/ --------------------------------------------- gi1/0/ Port that should be used for management only gi1/0/ gi1/0/...
Page 344 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Example The following example displays traffic seen by all the physical interfaces. console# show interfaces counters gigabitethernet 1/0/ Port InUcastPkts InMcastPkts InBcastPkts InOctets ---------- ------------ ------------ ------------ ------------ gi1/0/ Port OutUcastPkts OutMcastPkts OutBcastPkts OutOctets...
Page 345 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm The following table describes the fields shown in the display. F i e ld D e s c r i p t io n InOctets The number of received octets. InUcastPkts The number of received unicast packets.
Page 346: Show Port Jumbo-Frame
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm F i e ld D e s c r ip t io n Internal MAC Rx Errors The number of frames for which reception fails due to an internal MAC sublayer receive error. Received Pause Frames The number of MAC Control frames received with an opcode indicating the PAUSE operation.
Page 347: Storm-Control Broadcast Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Syntax show errdisable interfaces Parameters • Interface - Interface number • port-channel-number - Port channel index. Command Mode EXEC mode Example The following example displays the Err-Disable state of all interfaces. Console# show errdisable interfaces...
Page 348: Storm-Control Broadcast Level Kbps
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm Command Mode Interface Configuration mode(Ethernet) User Guidelines • Use the storm-control broadcast level Interface Configuration command to set the maximum rate. • Use the storm-control include-multicast Interface Configuration command to also count multicast packets and optionally unknown unicast packets in the storm control calculation.
Page 349: Storm-Control Include-Multicast
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm User Guidelines Use the storm-control broadcast enable Interface Configuration command to enable storm control. The calculated rate includes the 20 bytes of Ethernet framing overhead (preamble+SFD+IPG). Example console(config)# interface gigabitethernet 1/0/1 console(config-if)# storm-control broadcast level kbps 12345...
Page 350: Show Storm-Control
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Ethernet.fm show storm-control Use the show storm-control EXEC mode command to display the configuration of storm control. Syntax [interface-id ] show storm-control Parameters interface-id—Specifies the interface. Command Mode EXEC mode Example console# show storm-control Port...
Page 351: Phy Diagnostics Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm PHY Diagnostics Commands test cable-diagnostics tdr Use the test cable-diagnostics tdr Privileged EXEC mode command to use Time Domain Reflectometry (TDR) technology to diagnose the quality and characteristics of a copper cable attached to a port.
Page 352: Show Cable-Diagnostics Tdr
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm Can't perform the test on fiber ports show cable-diagnostics tdr Use the show cable-diagnostics tdr EXEC mode command to display information on the last Time Domain Reflectometry (TDR) test performed on all copper ports or on a specific copper port.
Page 353: Show Cable-Diagnostics Cable-Length
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm show cable-diagnostics cable-length Use the show cable-diagnostics cable-length EXEC mode command to display the estimated copper cable length attached to all ports or to a specific port. Syntax interface interface-id show cable-diagnostics cable-length [ Parameters interface-id—Specify an interface ID.
Page 354 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm Syntax interface interface-id] [detailed show fiber-ports optical-transceiver [ Parameters • interface-id—Specifies an interface ID. The interface ID must be an Ethernet port. • detailed—Displays detailed diagnostics. Command Mode EXEC mode Example The following examples display the optical transceiver diagnostics results.
Page 355 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm console# show fiber-ports optical-transceiver detailed Port Temp Voltage Current Output Input [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi0/1 Copper gi0/26 Copper gi0/27 3.32 7.26 3.53 3.68 gi0/28 3.33...
Page 356 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Phy_Diagnostics.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 357: Power Over Ethernet (Poe) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm Power over Ethernet (PoE) Commands power inline Use the power inline Interface Configuration mode command to configure the inline power administrative mode on an interface. Syntax {auto | never} power inline Parameters • auto—Turns on the device discovery protocol and applies power to the device.
Page 358: Power Inline Powered-Device
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm power inline powered-device Use the power inline powered-device Interface Configuration mode command to add a description of the powered device type. Use the no form of this command to remove the description. Syntax pd-type...
Page 359: Power Inline Usage-Threshold
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm no power inline priority Parameters • critical—Specifies that the powered device operation is critical. high—Specifies that the powered device operation is high priority. • • low—Specifies that the powered device operation is low priority.
Page 360: Power Inline Traps Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm Default Configuration The default threshold is 95 percent. Command Mode Global Configuration mode Example The following example configures the threshold for initiating inline power usage alarms to 90 percent. Console(config)# power inline usage-threshold 90...
Page 361: Power Inline Limit
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm power inline limit Use the power inline limit Interface Configuration mode command to configure the power limit per port on an interface. Use the no form of the command to return to default. Syntax...
Page 362: Default Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm Parameters interface-id—Specifies an interface ID. The interface ID must be an Ethernet port. stack-member-number—Specifies the switch member in a stack. Default Configuration There is no default configuration for this command. Command Mode EXEC mode Example 1: The following example displays information about the inline power.
Page 363 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm The following example displays information about the inline power for a specific port. console(config)# show power inline gi1/1/1 Port Powered Device State Status Priority Class ----- -------------- ------- ------ -------- ------- gi1/1/1 IP Phone Model A...
Page 364 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm F i e ld D e s c r ip t i o n Classification The power consumption classification of the powered device. Overload Counter Counts the number of overload conditions detected. Short Counter Counts the number of short conditions detected.
Page 365: Show Power Inline Consumption
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm Undefined error during Force On Supply voltage higher than settings Supply voltage lower than settings Disable_PDU flag raised during Force On Port is forced on, then disabled Port is off – forced power error due to Overload Port is off - “out of power budget”...
Page 366: Show Power Inline Version
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm stack-member-number—Specifies the switch member in a stack. Default Configuration There is no default configuration for this command. Command Mode EXEC mode Example The following example displays information about the inline power consumption. Console# show power inline consumption...
Page 367 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm Command Mode EXEC mode Example The following example displays information about the inline power consumption. Console# show power inline version Unit Software version ---- ---------------- 1.12 1.12 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 368 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\PoE.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 369: Eee Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm EEE Commands eee enable (global) Use the eee enable Global Configuration command to enable the EEE mode globally. Use the no format of the command to disable the mode. Syntax eee enable no eee enable Default Configuration EEE is enabled.
Page 370: Eee Lldp Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm no eee enable Default Configuration EEE is enabled. Command Mode Interface Configuration mode (Ethernet) User Guidelines Since EEE uses the Auto-Negotiation to negotiate the EEE support on both sides of the link, if Auto-Negotiation is not enabled on the port, the EEE Operational status is disabled.
Page 371 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm Syntax [interface-id] show eee Parameters interface-id—Specify an interface ID. The interface ID must be an Ethernet port. Command Mode EXEC Examples Example 1. Brief Information about all ports Switch>show eee EEE globally enabled EEE Administrate status is enabled on ports: gi1/0/1-6,gi1/0/12...
Page 372 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm Speed 100M: EEE supported Speed 1G: EEE supported Speed 10G: EEE not supported EEE Administrate status: enabled EEE LLDP Administrate status: enabled Example 4. Port in status UP and does not support EEE Switch>show eee gi1/0/20...
Page 373 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm EEE LLDP Operational status: disabled Example 6. EEE is disabled on the port Switch>show eee gi1/0/10 Port Status: UP EEE capabilities: Speed 10M: EEE not supported Speed 100M: EEE supported Speed 1G: EEE supported...
Page 374 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm Local Tx Timer: 10 usec Resolved Timer: 25 usec Local Rx Timer: 20 usec Example 8. EEE and EEE LLDP are running on the port Switch>show eee gi1/0/3 Port Status: UP EEE capabilities: Speed 10M: EEE not supported...
Page 375 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm Speed 1G: EEE supported Speed 10G: EEE not supported Current port speed: 1Gbps EEE Remote status: enabled EEE Administrate status: enabled EEE Operational status: enabled EEE LLDP Administrate status: enabled EEE LLDP Operational status:...
Page 376 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_EEE.fm Local Rx Timer: 20 usec Remote Tx Timer: 25 usec D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 377: Green Ethernet
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm Green Ethernet show green-ethernet Use the show green-ethernet Privileged EXEC mode command to show green-ethernet configuration and information. Syntax [interface-id] show green-ethernet Parameters interface-id —Specifies an interface ID. The interface ID must be an Ethernet port.
Page 378 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm Port is not present Link Type is not supported (fiber, auto media select) Port Link is up – NA S h o r t - R e a c h N o n - o p e r a t i o n a l R ea s o n s...
Page 379: Green-Ethernet Short-Reach (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm green-ethernet short-reach (global) Use the green-ethernet short-reach Global Configuration mode command to enable green-ethernet short-reach mode globally. Use the no form of this command to disabled it. Syntax green-ethernet short-reach no green-ethernet short-reach Parameters This command has no arguments or keywords.
Page 380: Green-Ethernet Short-Reach Force
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm Default Configuration EEE is enabled. Command Mode Interface Configuration mode (Ethernet) User Guidelines When short-reach Mode is enabled and is not forced, the VCT (Virtual Cable Tester) length check must be performed. The VCT length check can be performed only on a copper port operating at a speed of 1000 Mbps.
Page 381: Green-Ethernet Short-Reach Threshold
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm Default Configuration Short-reach mode is not forced. Command Mode Interface Configuration mode(Ethernet) Example console(config)# interface gi1/0/1 console(config-if)# green-ethernet short-reach force green-ethernet short-reach threshold Use the green-ethernet short-reach threshold Global Configuration mode command to set the maximum cable length for applying short-reach. Use the no form of this command to return to default.
Page 382: Green-Ethernet Power-Meter Reset
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_Green_Ethernet.fm The recommended default is 50m, as recommended by Marvell PHY team for any cable type. see appendix However, Marvell tests show that link partner can operate error free with an up to 80 m cable (cat 5e).
Page 383: Port Channel Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Channel.fm Port Channel Commands Use the channel-group Interface Configuration (Ethernet) mode command to associate a port with a port-channel. Use the no form of this command to remove a port from a port-channel. Syntax port-channel mode {on | auto}...
Page 384: Port-Channel Load-Balance
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Channel.fm Console(config-if)# channel-group mode on port-channel load-balance Use the port-channel load-balance Global Configuration mode command to configure the load balancing policy of the port channeling. Use the no form of this command to reset to default.
Page 385: Show Interfaces Port-Channel
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Channel.fm console(config)# port-channel load-balance src-dst-mac-ip console(config)# port-channel load-balance src-dst-mac-ip-port console(config)# show interfaces port-channel Use the show interfaces port-channel EXEC mode command to display port- channel information for all port channels or for a specific port channel.
Page 386 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Channel.fm Administrative Mode: access Operational Mode: down Access Mode VLAN: 1 Access Multicast TV VLAN: none Trunking Native Mode VLAN: 1 Trunking VLANs Enabled: 1 2-4094 (Inactive) General PVID: 1 General VLANs Enabled: none General Egress Tagged VLANs Enabled: none...
Page 387: Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Address Table Commands bridge multicast filtering Use the bridge multicast filtering Global Configuration mode command to enable the filtering of multicast addresses. Use the no form of this command to disable multicast address filtering.
Page 388: Bridge Multicast Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm bridge multicast address Use the bridge multicast address Interface Configuration (VLAN) mode command to register a MAC-layer multicast address in the bridge table and statically add or remove ports to or from the group. Use the no form of this command to unregister the MAC address.
Page 389: Bridge Multicast Forbidden Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Static multicast addresses can be defined on static VLANs only. You can execute the command before the VLAN is created. Example The following example registers the MAC address to the bridge table: Console(config)# interface vlan...
Page 390: Bridge Multicast Unregistered
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm port-channel port-channel-list—Specifies a list of port channels. Separate • nonconsecutive port-channels with a comma and no spaces. Use a hyphen to designate a range of port channels. Default Configuration No forbidden addresses are defined.
Page 391: Bridge Multicast Forward-All
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm • filtering—Filters unregistered multicast packets. Default Configuration Unregistered multicast addresses are forwarded. Command Mode Interface Configuration (Ethernet, Port-Channel) mode User Guidelines Do not enable unregistered multicast filtering on ports that are connected to routers, because the 224.0.0.x address range should not be filtered. Note that routers do not necessarily send IGMP reports for the 224.0.0.x range.
Page 392: Bridge Multicast Forbidden Forward-All
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm ethernet interface-list—Specifies a list of Ethernet ports. Separate • nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen to designate a range of ports. • port-channel port-channel-list—Specifies a list of port channels. Separate nonconsecutive port-channels with a comma and no spaces.
Page 393: Mac Address-Table Static
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm • ethernet interface-list—Specifies a list of Ethernet ports. Separate nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen to designate a range of ports. port-channel port-channel-list—Specifies a list of port channels. Separate •...
Page 394: Clear Mac Address-Table
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Parameters mac-address—AC address (Range: Valid MAC address) vlan-id—Specify the VLAN interface-id—Specify an interface ID. The interface ID can be one of the following types: Ethernet port or port-channel (Range: Valid Ethernet port, Valid Port-channel number) permanent—The address can only deleted by the no bridge address...
Page 395: Mac Address-Table Aging-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Parameters interface interface-id—Delete all dynamic address on the specified interface.The interface ID can be one of the following types: Ethernet port or port-channel. Command Mode Privileged EXEC mode Example console# clear mac address-table dynamic...
Page 396: Port Security
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm port security Use the port security Interface Configuration (Ethernet, Port-channel) mode command to enable port security on an interface. Use the no form of this command to disable port security on an interface. Syntax...
Page 397: Port Security Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm port security mode Use the port security mode Interface Configuration (Ethernet, port-channel) mode command configures the port security learning mode. Use the no form of this command to restore the default configuration. Syntax port security mode {lock | max-addresses }...
Page 398: Port Security Routed Secure-Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Syntax max-addr port security max { no port security max Parameters max-addr—Specifies the maximum number of addresses that can be learned on the port. (Range: 0–128) Default Configuration This default maximum number of addresses is 1.
Page 399: Show Mac Address-Table
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Default Configuration No addresses are defined. Command Mode Interface Configuration (Ethernet, port-channel) mode. It cannot be configured for a range of interfaces (range context). User Guidelines This command enables adding secure MAC addresses to a routed port in port security mode.
Page 400 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm vlan—Specifies VLAN, such as VLAN 1. • • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or port-channel. • mac-address—MAC address. Default Command Mode EXEC mode...
Page 401: Show Mac Address-Table Count
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm show mac address-table count Use the show mac address-table count EXEC mode command to display the number of addresses present in the Forwarding Database. Syntax [vlan vlan | interface interface-id] show mac address-table count Parameters •...
Page 402 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Syntax [vlan vlan-id] [address {mac-multicast- show bridge multicast address-table address | ipv4-multicast-address | ipv6-multicast-address}] [format {ip | mac}] Parameters • vlan vlan-id—Specifies the VLAN ID. • address {mac-multicast-address | ipv4-multicast-address | ipv6- multicast-address}—Specifies the multicast address. The possible values are: •...
Page 403 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Multicast address table for VLANs in MAC-GROUP bridging mode: Vlan MAC Address Type Ports ---- ----------------- -------------- ----- 01:00:5e:02:02:03 Static Forbidden ports for multicast addresses: Vlan MAC Address Ports ---- ----------------- ----- 01:00:5e:02:02:03 gi1/0/9...
Page 404 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Vlan Group Address Source Address Ports ---- --------------- --------------- ------- 239.2.2.2 gi1/0/9 239.2.2.2 1.1.1.11 gi1/0/9 Multicast address table for VLANs in IPv6-GROUP bridging mode: VLAN IP/MAC Address Type Ports ---- ----------------- --------- --------------------- ff02::4:4:4...
Page 405: Show Bridge Multicast Address-Table Static
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm show bridge multicast address-table static Use the show bridge multicast address-table static EXEC mode command to display the statically configured multicast addresses. Syntax [vlan vlan-id] [address mac- show bridge multicast address-table static multicast-address | ipv4-multicast-address | ipv6-multicast-address] [source...
Page 406 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Example The following example displays the statically configured multicast addresses. Console# show bridge multicast address-table static MAC-GROUP table Vlan MAC Address Ports ---- -------------- -------- 0100.9923.8787 gi1/0/1, gi1/0/2 Forbidden ports for multicast addresses: Vlan...
Page 407 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Vlan Group Address Source Ports address ---- --------------- ------ --------------- Forbidden ports for multicast addresses: Vlan Group Address Source Ports address ---- --------------- ------ --------------- IPv6-GROUP Table Vlan IP Address Ports ---- ----------------- ---------...
Page 408: Show Bridge Multicast Filtering
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Forbidden ports for multicast addresses: Ports Vlan Group Address Source address ------ ---- --------------- --------------- gi1/0/ FF12::3 FE80::201:C9A9:FE40 :8988 show bridge multicast filtering Use the show bridge multicast filtering EXEC mode command to display the multicast filtering configuration.
Page 409: Show Bridge Multicast Unregistered
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Example The following example displays the multicast configuration for VLAN 1. Console# show bridge multicast filtering 1 Filtering: Enabled VLAN: 1 Port Forward-All ----- Static Status gi1/0/1 --------- ------ gi1/0/2 Forbidden Filter gi1/0/3 Forward...
Page 410: Show Ports Security
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Example The following example displays the unregistered multicast configuration. Console# show bridge multicast unregistered Port Unregistered ------- ------------- gi1/0/1 Forward gi1/0/2 Filter gi1/0/3 Filter show ports security Use the show ports security Privileged EXEC mode command to display the port-lock status.
Page 411: Show Ports Security Addresses
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Addresses gi1/0/ Enabled Lock Discard, 8 Disabled - Shutdown The following table describes the fields shown above. F i e ld D e s c r ip t io n Port The port number.
Page 412 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Address_Table.fm Example The following example displays dynamic addresses in all currently locked ports. Console# show ports security addresses Port Status Learning Current Maximum ---- -------- ------------- ------- ------- gi1/0/1 Enabled Max-addresses gi1/0/2 Disabled Max-addresses gi1/0/3...
Page 413: Port Monitor Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Monitor.fm Port Monitor Commands port monitor Use the port monitor Interface Configuration (Ethernet) mode command to start a port monitoring session. Use the no form of this command to stop a port monitoring session. Syntax...
Page 414 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Monitor.fm User Guidelines This command enables port copy between Source Port (src-interface) to a Destination Port (The port in context). The analyzer port for port ingress traffic mirroring should be the same port for all mirrored ports.
Page 415: Show Ports Monitor
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Monitor.fm • Moreover, if port 2 is an untagged member in VLAN 3 and port 4 is a tagged member then both instances will look different (one tagged and the other is not). 2) When the port is configured to 802.1X auto mode it will forward any mirrored traffic regardless of the .1X state.
Page 416 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Port_Monitor.fm gi1/0/ gi1/0/ RX,TX Active gi1/0/ gi1/0/ Active gi1/0/ D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 417: Sflow Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm sFlow Commands sflow receiver Use the sflow receiver Global Configuration mode command to define sFlow collector. Use the no form of this command to remove the definition of the collector. Syntax index {ipv4-address | ipv6-address | hostname} [port port]...
Page 418: Sflow Flow-Sampling
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm Command Mode Global Configuration mode User Guidelines If the IP address of the sFlow receiver is set to 0.0.0.0, no sFlow datagrams are sent. sflow flow-sampling Use the sflow flow-sampling Interface Configuration mode command to enable sFlow Flow sampling and configure the average sampling rate of a specific port.
Page 419: Sflow Counters-Sampling
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm sflow counters-sampling Use the sflow counters-sampling Interface Configuration mode command to enable sFlow Counters sampling and to configure the maximum interval of a specific port. Use the no form of this command to disable sFlow Counters sampling.
Page 420: Show Sflow Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm User Guidelines If no interface is specified by the user, the command clears all the sFlow statistics counters (including datagrams sent). If an interface is specified by the user, the command clears only the counter of the specific interface.
Page 421: Show Sflow Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm Inter- Flow Counters Max Header Flow Counters Collector face Sampling Sampling Size Collector Index Index ----- ----------- --------- --------- ---------- ----- ------------ gi1/0/1 1/2048 60 sec gi1/0/2 1/4096 Disabled show sflow statistics Use the show sflow statistics EXEC mode command to display the sFlow statistics for ports that are enabled for Flow sampling or Counters sampling.
Page 422 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\750_sFlow.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 423: Lldp Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm LLDP Commands lldp run Use the lldp run Global Configuration mode command to enable Link Layer Discovery Protocol (LLDP). To disable LLDP , use the no form of this command. Syntax lldp run no lldp run Parameters This command has no arguments or keywords.
Page 424: Lldp Receive
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Syntax lldp transmit no lldp transmit Parameters This command has no arguments or keywords. Default Enabled Command Mode Interface Configuration (Ethernet) mode User Guidelines LLDP manages LAG ports individually. LLDP sends separate advertisements on each port in a LAG.
Page 425: Lldp Timer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Parameters This command has no arguments or keywords. Default Enabled Command Mode Interface Configuration (Ethernet) mode User Guidelines LLDP manages LAG ports individually. LLDP data received through LAG ports is stored individually per port.
Page 426: Lldp Hold-Multiplier
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Default Configuration The default update interval is 30 seconds. Command Mode Global Configuration mode Example The following example sets the interval for sending LLDP updates to 60 seconds. Console(config)# lldp timer lldp hold-multiplier Use the lldp hold-multiplier Global Configuration mode command to set the time interval during which the receiving device holds a Link Layer Discovery Protocol (LLDP) packet before discarding it.
Page 427: Lldp Reinit
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm TTL = min(65535, LLDP-Timer * LLDP-HoldMultiplier) For example, if the value of the LLDP timer is 30 seconds, and the value of the LLDP hold multiplier is 4, then the value 120 is encoded in the TTL field of the LLDP header.
Page 428: Lldp Tx-Delay
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm lldp tx-delay Use the lldp tx-delay Global Configuration mode command to set the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Use the no form of this command to restore the default configuration.
Page 429: Lldp Management-Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Syntax tlv2 tlv5 lldp optional-tlv … no lldp optional-tlv Parameters tlv—Specifies TLV that should be included. Available optional TLVs are: port-desc, sys-name, sys-desc, sys-cap, 802.3-mac-phy, 802.3-lag, 802.3-max- frame-size. Default Configuration No optional TLV is transmitted.
Page 430: Lldp Notifications
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm automatic—Specifies that the software would automatically choose a • management address to advertise from all the IP addresses of the product. In case of multiple IP addresses the software chooses the lowest IP address among the dynamic IP addresses.
Page 431: Lldp Notifications Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm notifications on an interface. Use the no form of this command to restore the default configuration. Syntax {enable | disable} lldp notifications no lldp notifications Parameters • enable—Enables sending LLDP notifications. • disable—Disables sending LLDP notifications.
Page 432: Lldp Optional-Tlv 802.1
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Parameters seconds—The device should not send more than one notification in the indicated period. (Range: 5–3600) Default 5 seconds Command Mode Global Configuration mode Example console(config)# lldp notification interval 10 lldp optional-tlv 802.1 Use the lldp optional-tlv Interface Configuration mode command to specify which optional TLVs from the basic set to transmit.
Page 433: Lldp Med Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm • ppvid—Adds/removes PPVID for advertising. PPVID 0 can be used to advertise the PPVIDs capabilities of the interface.(Range: 0–4094) • vlan—Adds/removse VLAN ID for advertising. (Range: 1–4094) Default No optional TLV is transmitted. Command Mode...
Page 434: Lldp Med Notifications Topology-Change
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Console(config)# gigabitethernet 1/0/3 interface Console(config)# lldp med enable location lldp med notifications topology-change Use the lldp med notifications topology-change Interface Configuration (Ethernet) mode command to enable sending LLDP MED topology change notifications. Use the no form of this command to restore the default configuration.
Page 435: Lldp Med Fast-Start Repeat-Count
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm lldp med fast-start repeat-count Use the lldp med fast-start repeat-count Global Configuration mode command to configure the number of times the fast start LLDPDU is being sent during the activation of the fast start mechanism defined by LLDP- MED.
Page 436: Lldp Med Network-Policy (Interface)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Parameters • number—Network policy sequential number. • application—The name or the number of the primary function of the application defined for this network policy. Available application names are: voice, voice-signaling, guest-voice, guest-voice-signaling, softphone- voice, video-conferencing, streaming-video, video-signaling.
Page 437: Clear Lldp Table
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Syntax {add | remove} number lldp med network-policy number no lldp med network-policy Parameters • number—Specifies the network policy sequential number. • add—Attaches the specified network policy to the interface. remove—Removes the specified network policy from the interface.
Page 438: Lldp Med Location
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Parameters interface-id—Specifies an interface ID. The interface ID must be an Ethernet port. Command Mode Privileged EXEC mode Example console# clear lldp table gigabitethernet 1/0/1 lldp med location Use the lldp med location Interface Configuration (Ethernet) mode command to configure the location information for the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) for an interface.
Page 439: Show Lldp Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Command Mode Interface Configuration (Ethernet) mode Example The following example configures the LLDP MED location information on gigabitethernet port 1/0/2 as a civic address. console(config)# interface gi1/0/2 console(config-if)# lldp med location civic-address 616263646566 show lldp configuration...
Page 440 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm LLDP packets handling: Filtering Port State Optional TLVs Address Notifications ---- ----- -------------- ------- ------------ gi1/0/1 RX,TX PD, SN, SD, SC 172.16.1.1 Disabled gi1/0/2 PD, SN 172.16.1.1 Disabled gi1/0/3 RX,TX PD, SN, SD, SC...
Page 441: Show Lldp Med Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm The following table describes the significant fields shown in the display: F i e ld D es c r ip t i o n Timer The time interval between LLDP updates. Hold multiplier The amount of time (as a multiple of the timer interval) that the receiving device holds a Link Layer Discovery Protocol (LLDP) packet before discarding it.
Page 442 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Command Mode Privileged EXEC mode Example The following examples display the LLDP MED configuration for all interfaces and for gigabitethernet port 1/0/1. console# show lldp med configuration Fast Start Repeat Count: 4. Network policy 1...
Page 443: Show Lldp Local Tlvs-Overloading
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm show lldp local tlvs-overloading Use the show lldp local tlvs-overloading EXEC mode command to display the status of TLVs overloading of the Link Layer Discovery Protocol (LLDP). Syntax [interface-id] show lldp local tlvs-overloading Parameters interface-id—Specifies an interface ID.
Page 444: Show Lldp Local
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm show lldp local Use the show lldp local Privileged EXEC mode command to display the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific port. Syntax interface-id show lldp local Parameters Interface-id—Specifies an interface ID.
Page 445 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Aggregation port ID: 1 802.3 Maximum Frame Size: 1522 802.3 EEE Local Tx: 30 usec Local Rx: 25 usec Remote Tx Echo: 30 usec Remote Rx Echo: 25 usec 802.1 PVID: 1 802.1 PPVID: 2 supported, enabled 802.1 VLAN: 2 (VLAN2)
Page 446: Show Lldp Neighbors
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Software Revision: 3.8 Serial number: 7978399 Manufacturer name: Manufacturer Model name: Model 1 Asset ID: Asset 123 Switch# show lldp local gi1/0/2 LLDP is disabled. show lldp neighbors Use the show lldp neighbors Privileged EXEC mode command to display information about neighboring devices discovered using Link Layer Discovery Protocol (LLDP).
Page 447 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Switch# show lldp neighbors Port Device ID Port ID System Name Capabilities TTL ----- ------------------ -------- ---------- ----------- ---- gi1/0/1 00:00:00:11:11:11 gi1/0/1 ts-7800-2 gi1/0/1 00:00:00:11:11:11 D gi1/0/1 ts-7800-2 gi1/0/2 00:00:26:08:13:24 gi1/0/3 ts-7900-1 B, R...
Page 448 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Aggregation capability: Capable of being aggregated Aggregation status: Not currently in aggregation Aggregation port ID: 1 802.3 Maximum Frame Size: 1522 802.3 EEE Remote Tx: 25 usec Remote Rx: 30 usec Local Tx Echo: 30 usec Local Rx Echo: 25 usec 802.1 PVID: 1...
Page 449 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Software revision: 2.7.1 Serial number: LM759846587 Manufacturer name: VP Model name: TR12 Asset ID: 9 LLDP-MED Location Coordinates: 54:53:c1:f7:51:57:50:ba:5b:97:27:80:00:00:67:01 The following table describes significant LLDP fields shown in the display: F i e ld...
Page 450 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Auto-negotiation The port speed/duplex/flow-control capabilities Advertised advertised by the auto-negotiation. Capabilities Operational MAU type The port MAU type. LLDP MED Capabilities The sender's LLDP-MED capabilities. Device type The device type. Indicates whether the sender is a Network Connectivity Device or Endpoint Device, and if an Endpoint, to which Endpoint Class it belongs.
Page 451: Show Lldp Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm Power value The total power in watts required by a PD device from a PSE device, or the total power a PSE device is capable of sourcing over a maximum length cable based on its current configuration.
Page 452 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LLDP.fm TX Frames RX Frames TLVs RX Ageouts Port Total Total Discarded Errors Discarded Unrecognized Total --------- --------- --------- --------- ------ --------- ------------ ------------------ ----------- gi1/0/1 gi1/0/2 gi1/0/3 gi1/0/4 gi1/0/5 gi1/0/6 gi1/0//7 gi1/0/8 gi1/0/9 gi1/0/10 D E L L C O N F I D E N T I A L –...
Page 453: Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Spanning-Tree Commands spanning-tree Use the spanning-tree Global Configuration mode command to enable spanning-tree functionality. Use the no form of this command to disable the spanning-tree functionality. Syntax spanning-tree no spanning-tree Default Configuration Spanning-tree is enabled.
Page 454: Spanning-Tree Forward-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Syntax {stp | rstp | mst} spanning-tree mode no spanning-tree mode Parameters • stp—Specifies that the Spanning Tree Protocol (STP) is enabled. • rstp—Specifies that the Rapid Spanning Tree Protocol (RSTP) is enabled. •...
Page 455: Spanning-Tree Hello-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Syntax seconds spanning-tree forward-time no spanning-tree forward-time Parameters seconds—Specifies the spanning-tree forward time in seconds. (Range: 4–30) Default Configuration The default forwarding time for the IEEE Spanning Tree Protocol (STP) is 15 seconds. Command Mode...
Page 456: Spanning-Tree Max-Age
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Parameters seconds—Specifies the spanning-tree Hello time in seconds. (Range: 1–10) Default Configuration The default Hello time for IEEE Spanning Tree Protocol (STP) is 2 seconds. Command Mode Global Configuration mode User Guidelines When configuring the Hello time, the following relationship should be maintained: Max-Age >= 2*(Hello-Time + 1)
Page 457: Spanning-Tree Priority
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Default Configuration The default maximum age for IEEE Spanning Tree Protocol (STP) is 20 seconds. Command Mode Global Configuration mode User Guidelines When configuring the maximum age, the following relationships should be maintained: 2*(Forward-Time - 1) >= Max-Age Max-Age >= 2*(Hello-Time + 1)
Page 458: Spanning-Tree Disable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Command Mode Global Configuration mode User Guidelines The priority value must be a multiple of 4096. The switch with the lowest priority is the root of the spanning tree. Example The following example configures the spanning-tree priority to 12288.
Page 459: Spanning-Tree Cost
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm spanning-tree cost Use the spanning-tree cost Interface Configuration (Ethernet, port-channel) mode command to configure the spanning-tree path cost for a port. Use the no form of this command to restore the default configuration. Syntax...
Page 460: Spanning-Tree Port-Priority
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm spanning-tree port-priority Use the spanning-tree port-priority Interface Configuration (Ethernet, port- channel) mode command to configure the port priority. Use the no form of this command to restore the default configuration. Syntax priority spanning-tree port-priority...
Page 461: Spanning-Tree Link-Type
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Syntax spanning-tree portfast [auto] no spanning-tree portfast Parameters auto—Specifies that the software waits for 3 seconds (with no BPDUs received on the interface) before putting the interface into the PortFast mode. Default Configuration PortFast mode is disabled.
Page 462: Spanning-Tree Pathcost Method
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm shared—Specifies that the port link type is shared. • Default Configuration The device derives the port link type from the duplex mode. A full-duplex port is considered a point-to-point link and a half-duplex port is considered a shared link.
Page 463: Spanning-Tree Bpdu (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Command Mode Global Configuration mode User Guidelines This command applies to all the spanning tree instances on the switch. • If the short method is chosen, the switch use for the default cost values in the range 1 through 65,535.
Page 464: Spanning-Tree Bpdu (Interface)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Default Configuration The default setting is flooding. Command Mode Global Configuration mode User Guidelines The filtering and flooding modes are relevant when the spanning tree is disabled globally or on a single interface. Example...
Page 465: Spanning-Tree Guard Root
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Default Configuration The spanning-tree bpdu (Global) command determines the default configuration. Command Mode Interface Configuration (Ethernet, Port-channel) mode Example The following example defines the BPDU packet as flooding when the spanning tree is disabled on gigabitethernet port 1/0/3...
Page 466: Spanning-Tree Bpduguard
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm When root guard is enabled, the port changes to the alternate state if the spanning-tree calculations select the port as the root port. Example The following example prevents gigabitethernet port 1/0/1 from being the root port of the device..
Page 467: Clear Spanning-Tree Detected-Protocols
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Example The following example shuts down Ethernet port 1/0/5 when it receives a BPDU. Console(config)# gigabitethernet 1/0/5 interface Console(config-if)# spanning-tree bpduguard enable clear spanning-tree detected-protocols Use the clear spanning-tree detected-protocols Privileged EXEC command to restart the protocol migration process (force the renegotiation with...
Page 468: Spanning-Tree Mst Max-Hops
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Syntax instance-id priority priority spanning-tree mst instance-id priority no spanning-tree mst Parameters • instance-id—Specifies the spanning-tree instance ID. (Range:1–15) • priority—Specifies the device priority for the specified spanning-tree instance. This setting affects the likelihood that the switch is selected as the root switch.
Page 469: Spanning-Tree Mst Port-Priority
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm no spanning-tree mst max-hops Parameters hop-count—Specifies the number of hops in an MST region before the BDPU is discarded. (Range: 1–40) Default Configuration The default number of hops is 20. Command Mode Global Configuration mode...
Page 470: Spanning-Tree Mst Cost
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines The priority value must be a multiple of 16. Example The following example configures the port priority of port gi1/0/1 to 144. Console(config)# gigabitethernet 1/0/1...
Page 471: Spanning-Tree Mst Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Fast Ethernet (100 Mbps) 200,000 Ethernet (10 Mbps) 2,000,000 Command Mode Interface Configuration (Ethernet, port-channel) mode Example The following example configures the MSTP instance 1 path cost for gigabitethernet port 1/0/9 to 4. Console(config)#...
Page 472: Instance (Mst)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Console(config-mst)# revision instance (MST) Use instance MST Configuration mode command to map VLANs to an MST instance. Use the no form of this command to restore default mapping. Syntax instance-id vlan vlan-range instance instance-id vlan vlan-range...
Page 473: Name (Mst)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Console(config-mst)# 10-20 instance vlan name (MST) Use the name MST Configuration mode command to define the MST configuration name. Use the no form of this command to restore the default setting. Syntax string name...
Page 474: Show (Mst)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Parameters value—Specifies the MST configuration revision number. (Range: 0–65535) Default Configuration The default configuration revision number is 0. Command Mode MST Configuration mode Example The following example sets the configuration revision to 1. Console(config) #...
Page 475: Exit (Mst)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Example The following example displays a pending MST region configuration. Console(config-mst)# show pending Pending MST configuration Name: Region1 Revision: 1 Instance Vlans Mapped State -------- ------------ ------- 1-9,21-4094 Enabled 10-20 Enabled exit (MST) Use the exit MST Configuration mode command to exit the MST region Configuration mode and appy all configuration changes.
Page 476: Abort (Mst)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm abort (MST) Use the abort MST Configuration mode command to exit the MST Configuration mode without applying the configuration changes. Syntax abort Command Mode MST Configuration mode Example The following example exits the MST Configuration mode without saving changes.
Page 477 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm • mst-configuration—Displays the MST configuration identifier. • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel. Command Mode Privileged EXEC mode Example The following examples display spanning-tree information.
Page 478 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Interfaces Name State Prio. Cost Role PortFast Type --------- ------ ----- ---- --------- ---------- ------ 128.1 gi1/0/1 Enabled 20000 Root P2p (RSTP) 128.2 gi1/0/2 Enabled 20000 Desg Shared (STP) 128.3 gi1/0/3 Disabled 20000 128.4...
Page 479 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Name State Prio.Nbr Cost Role PortFast Type -------- -------- -------- ----- ---- --------- ---------- gi1/0/1 Enabled 128.1 20000 Desg P2p (RSTP) gi1/0/2 Enabled 128.2 20000 Desg Shared (STP) gi1/0/3 Disabled 128.3 20000 gi1/0/4 Enabled 128.4...
Page 480 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Name State Prio.Nbr Cost Role PortFast Type --------- -------- ------- ----- ---- --------- ----- gi1/0/1 Enabled 128.1 20000 gi1/0/2 Enabled 128.2 20000 gi1/0/3 Disabled 128.3 20000 gi1/0/4 Enabled 128.4 20000 gi1/0/5 Enabled 128.5 20000...
Page 481 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Name State Prio.Nbr Cost Role PortFast Type --------- -------- -------- ----- ---- --------- ---------- gi1/0/1 20000 Root P2p (RSTP) Enabled 128.1 gi1/0/2 20000 Desg Shared (STP) Enabled 128.2 gi1/0/4 20000 Altn Shared (STP) Enabled 128.4...
Page 482 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Name State Prio.Nbr Cost Role PortFast Type --------- -------- -------- ----- ---- --------- ---------- gi1/0/4 Altn Shared (STP) Enabled 128.4 Console# show spanning-tree detail Spanning tree enabled mode RSTP Default port cost method: long...
Page 483 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Port 2 (gi1/0/2) enabled State: Forwarding Role: Designated Port id: 128.2 Port cost: 20000 Type: Shared (configured: auto) STP Port Fast: No (configured:no) Designated bridge Priority: 32768 Address: 00:02:4b:29:7a:00 Designated port id: 128.2 Designated path cost: 20000...
Page 484 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Number of transitions to forwarding state: N/A BPDU: sent N/A, received N/A Console# show spanning-tree ethernet gi1/0/1 Port 1 (gi1/0/1) enabled State: Forwarding Role: Root Port id: 128.1 Port cost: 20000 Type: P2p (configured: auto) RSTP...
Page 485 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Console# show spanning-tree Spanning tree enabled mode MSTP Default port cost method: long ###### MST 0 Vlans Mapped: 1-9 CST Root ID Priority 32768 Address 00:01:42:97:e0:00 Path 20000 Cost gi1/0/1 Root Port Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec...
Page 486 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm ###### MST 1 Vlans Mapped: 10-20 Root ID Priority 24576 Address 00:02:4b:29:89:76 Path 20000 Cost gi1/0/4 Root Port Rem hops Bridge ID Priority 32768 Address 00:02:4b:29:7a:00 Interfaces Name State Prio.Nbr Cost Role PortFast Type...
Page 487 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm IST Master ID Priority 32768 Address 00:02:4b:29:7a:00 This switch is the IST master. Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Max hops 20 Number of topology changes 2 last change occurred 2d18h...
Page 488 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Port 3 (gi1/0/3) enabled State: Forwarding Role: Designated Port id: 128.3 Port cost: 20000 Type: Shared (configured: auto) Internal Port Fast: No (configured:no) Designated bridge Priority: 32768 Address: 00:02:4b:29:7a:00 Designated port id: 128.3 Designated path cost: 20000...
Page 489 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Port 1 (gi1/0/1) enabled State: Forwarding Role: Boundary Port id: 128.1 Port cost: 20000 Type: P2p (configured: auto) Boundary RSTP Port Fast: No (configured:no) Designated bridge Priority: 32768 Address: 00:02:4b:29:7a:00 Designated port id: 128.1...
Page 490 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Console# show spanning-tree Spanning tree enabled mode MSTP Default port cost method: long ###### MST 0 Vlans Mapped: 1-9 CST Root ID Priority 32768 Address 00:01:42:97:e0:00 Path Cost 20000 Root gi1/0/1 Port Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec...
Page 491: Show Spanning-Tree Bpdu
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm Root gi1/0/1 Port Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Max hops 20 show spanning-tree bpdu Use the show spanning-tree bpdu EXEC mode command to display the BPDU handling when spanning-tree is disabled.
Page 492 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Spanning-Tree.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 493: Vlan Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm VLAN Commands vlan database Use the vlan database Global Configuration mode command to enter the VLAN Configuration mode. Syntax vlan database Command Mode Global Configuration mode Example The following example enters the VLAN database mode.
Page 494: Interface Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm vlan-range [name vlan-name] [media ethernet] [state active] vlan vlan-range no vlan Parameters vlan-range—Specifies a list of VLAN IDs to add. Separate nonconsecutive • VLAN IDs with a comma and no spaces. Use a hyphen to designate a range of IDs.
Page 495: Interface Range Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm User Guidelines If the VLAN does not exist (ghost VLAN), not all of the commands are available under the interface VLAN context. The commands that are supported for VLANs that do not exist are: •...
Page 496: Name
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Example The following example groups VLANs 221 through 228 and 889 to receive the same command. Console(config)# 221-228, vlan 889 interface range vlan Console(config-if)# name Use the name Interface Configuration (VLAN) mode command to add a name to a VLAN.
Page 497: Switchport Protected-Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm switchport protected-port Use the switchport protected-port Interface Configuration mode command to isolate unicast, multicast, and broadcast traffic at Layer 2 from other protected ports on the same switch. Use the no form of this command to disable protection on the port.
Page 498: Switchport Community
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm switchport community Use the switchport community Interface Configuration mode command to associate a protected port with a community. Use the no form of this command to return to default. Syntax community switchport community no switchport community Parameters community—Specifies the community number.
Page 499: Switchport
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ehernet port or Port-channel. Command Mode EXEC mode Example console# show interfaces protected-ports Interface State Community --------- ------------- ---------...
Page 500: Switchport Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Command Mode Interface Configuration (Ethernet, port-channel) mode switchport mode Use the switchport mode Interface Configuration (Ethernet, port-channel) mode command to configure the VLAN membership mode of a port. Use the no form of this command to restore the default configuration.
Page 501: Switchport Access Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Example The following example configures gigabitethernet port 1/0/1 as an untagged layer 2 VLAN port. Console(config)# gigabitethernet 1/0/1 interface Console(config-if)# switchport mode access switchport access vlan Use the switchport access vlan Interface Configuration (Ethernet, port- channel) mode command to configure the VLAN ID when the interface is in access mode.
Page 502: Switchport Access Multicast-Tv Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Example The following example configures a VLAN ID of 23 to the untagged layer 2 VLAN gigabitethernet port 1/0/1. Console(config)# gigabitethernet 1/0/1 interface Console(config-if)# switchport access vlan switchport access multicast-tv vlan Use the switchport access multicast-tv vlan Interface Configuration...
Page 503: Switchport Trunk Allowed Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Example The following example enables gigabitethernet port 1/0/5 to receive multicast transmissions from VLAN 11. Console(config)# interface gigabitethernet 1/0/5 Console(config-if)# switchport access multicast-tv vlan switchport trunk allowed vlan Use the switchport trunk allowed vlan Interface Configuration mode command to set the trunk characteristics when the interface is in trunking mode.
Page 504: Switchport Trunk Native Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Default Configuration The Default VLAN is its Native VLAN and the port belongs to either all VLANs or only to the Default VLAN depending on a value of parameter Trunk Port Default Configuration. Command Mode...
Page 505: Switchport General Allowed Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Default Configuration If the default VLAN is enabled, the VLAN ID is 1. Otherwise, the VLAN ID is 4095. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines The command adds the port as a member of the VLAN. If the port is already a member of the VLAN (not a native), it must first be removed from the VLAN.
Page 506: Switchport General Pvid
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm remove vlan-list—List of VLAN IDs to remove. Separate nonconsecutive • VLAN IDs with a comma and no spaces. Use a hyphen to designate a range of IDs. • tagged - Specify that packets would be transmitted tagged for the configured VLANs •...
Page 507: Switchport General Ingress-Filtering Disable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Default Configuration If the default VLAN is enabled, PVID is 1. Otherwise, PVID is =4095. Command Mode Interface Configuration (Ethernet, Port-channel) mode Example The following example configures PVID 234 for gigabitethernet port 1/0/2, when the interface is in general mode.
Page 508: Switchport General Acceptable-Frame-Type
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Console(config-if)# switchport general ingress-filtering disable switchport general acceptable-frame-type Use the switchport general acceptable-frame-type Interface Configuration mode command to configure ingress filtering based on packet type tagged/untagged. Use the no form of this command to return to default.
Page 509: Switchport Customer Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm switchport customer vlan Use the switchport customer vlan Interface Configuration (Ethernet, Port- channel) mode command to set the port's VLAN when the interface is in customer mode. Use the no form of this command to restore the default configuration.
Page 510: Map Protocol Protocols-Group
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Syntax {add vlan-list | remove vlan-list} switchport general forbidden vlan {add vlan-list | remove vlan-list} no switchport general forbidden vlan Parameters • add vlan-list—Specifies a list of VLAN IDs to add. Separate nonconsecutive VLAN IDs with a comma and no spaces. Use a hyphen to designate a range of IDs.
Page 511: Switchport General Map Protocols-Group Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Parameters protocol—Specifies a 16-bit protocol number or one of the reserved names • listed in the User Guidelines. (Range: 0x0600–0xFFFF) • encapsulation—Specifies one of the following values: Ethernet, rfc1042, llcOther. If no option is indicated, the default is Ethernet.
Page 512: Private-Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Syntax group vlan-id switchport general map protocols-group vlan group no switchport general map protocols-group Parameters • group—Specifies the group number as defined in the map protocol protocols-group command. (Range: 1–65535) • vlan-id—Defines the VLAN ID in the classifying rule.
Page 513: Private-Vlan Association
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Syntax {primary | isolated} private-vlan no private-vlan Parameters • Primary—Designate the VLAN as Primary VLAN. • Isolated—Designate the VLAN as Isolated VLAN. Default Configuration No private VLANs are configured. Command Mode Interface Configuration (VLAN) mode User Guidelines •...
Page 514: Switchport Private-Vlan Mapping
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm remove—Clears the association between a secondary VLAN and a primary • VLAN. • secondary-vlan-list—Specifies one or more secondary VLANs to be associated with a primary VLAN in a private VLAN. Default Configuration No private VLANs are configured.
Page 515: Switchport Private-Vlan Host-Association
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Parameters primary-vlan-id—The VLAN ID of the primary VLAN. • • secondary-vlan-list—Specifies one or more secondary VLANs. Default Configuration No VLAN is configured. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines The secondary VLANs should be associated with the primary VLANs, otherwise the configuration is not accepted.
Page 516: Show Vlan Private-Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm User Guidelines The secondary VLAN should be associated with the primary VLANs, otherwise the configuration is not accepted. See the command private-vlan association. show vlan private-vlan Use the show vlan private-vlan EXEC mode command to show the private VLANs information.
Page 517 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm an interface. Use the no form of this command to restore the default configuration. Syntax vlan-id ip internal-usage-vlan no ip internal-usage-vlan Parameters vlan-id—Specifies the internal usage VLAN ID. Command Mode Interface Configuration (Ethernet, Port-channel) mode. It cannot be configured for a range of interfaces (range context).
Page 518: Show Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm show vlan Use the show vlan Privileged EXEC mode command to display VLAN information for all VLANs or for a specific VLAN. Syntax tag vlan-id | name vlan-name show vlan [ Parameters • tag vlan-id—Specifies a VLAN ID.
Page 519: Show Vlan Multicast-Tv
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm show vlan multicast-tv Use the show vlan multicast-tv EXEC mode command to display information on the source ports and receiver ports of multicast-TV VLAN. Syntax vlan-id show vlan multicast-tv vlan Parameters vlan-id—Specifies the VLAN ID.
Page 520: Show Vlan Internal Usage
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Syntax show vlan protocols-groups Command Mode EXEC mode Example The following example displays protocols-groups information. Console> show vlan protocols-groups Protocol Encapsulation Group ------------- -------------- -------- 0x800 (IP) Ethernet 0x806 (ARP) Ethernet 0x86dd (IPv6) Ethernet...
Page 521: Show Interfaces Switchport
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Example The following example displays VLANs used internally by the device. Console# show vlan internal usage Usage VLAN IP address Reserved -------- -------- ---------- ---------- 1/21 1007 Active Eth 1/22 1008 Inactive Eth 1...
Page 522 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\VLAN_ISCLI_Only.fm Trunking Native Mode VLAN: 1 Trunking VLANs Enabled: 1 2-4094 (Inactive) General PVID: 1 General VLANs Enabled: none General Egress Tagged VLANs Enabled: none General Forbidden VLANs: none General Ingress Filtering: enabled General Acceptable Frame Type: all...
Page 523: Igmp Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm IGMP Snooping Commands ip igmp snooping (Global) Use the ip igmp snooping Global Configuration mode command to enable Internet Group Management Protocol (IGMP) snooping. Use the no form of this command to disable IGMP snooping.
Page 524: Ip Igmp Snooping Mrouter
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Syntax vlan-id ip igmp snooping vlan vlan-id no ip igmp snooping vlan Parameters vlan-id—Specifies the VLAN. Default Disabled Command Mode Global Configuration mode User Guidelines IGMP snooping can be enabled only on static VLANs.
Page 525: Ip Igmp Snooping Mrouter Interface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Parameters vlan-id—Specifies the VLAN. Default Learning pim-dvmrp is enabled. Command Mode Global Configuration mode User Guidelines Multicast router ports are learned based on: • Queries received on the port • PIM/PIMv2 received on the port •...
Page 526: Ip Igmp Snooping Forbidden Mrouter Interface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm interface-list—Specifies the list of interfaces. The interfaces can be one of • the following types: Ethernet port or Port-channel. Default No ports defined Command Mode Global Configuration mode User Guidelines A port that is defined as a multicast router port receives all IGMP packets (reports and queries) as well as all multicast data.
Page 527: Ip Igmp Snooping Static
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Command Mode Global Configuration mode User Guidelines A port that is a forbidden mrouter port cannot be a multicast router port (i.e. cannot be learned dynamically or assigned statically). You can execute the command before the VLAN is created.
Page 528: Ip Igmp Snooping Multicast-Tv
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm User Guidelines Static multicast addresses can only be defined on static VLANs. You can execute the command before the VLAN is created. You can register an entry without specifying an interface. Using the no. command without a port-list removes the entry.
Page 529: Ip Igmp Snooping Querier
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm User Guidelines Use this command to define the multicast transmissions on a multicast-TV VLAN. The configuration is only relevant for an Access port that is a member in the configured VLAN as a multicast-TV VLAN.
Page 530: Ip Igmp Snooping Querier Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm The IGMP Snooping Querier disables itself if it detects IGMP traffic from a multicast router. It restarts automatically after host-time-out/2. Following are the IGMP snooping querier parameters as a function of the IGMP snooping parameters: •...
Page 531: Ip Igmp Robustness
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Example console(config)# ip igmp snooping vlan 1 querier address 1.2.3.4 ip igmp robustness Use the ip igmp robustness Interface Configuration mode command to change a value of the IGMP robustness variable. Use the no format of the command to return to default.
Page 532: Ip Igmp Query-Max-Response-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Syntax seconds ip igmp query-interval no ip igmp query-interval Parameters seconds—Frequency, in seconds, at which IGMP query messages are sent on the interface. (Range: 30–18000) Default Command Mode Interface Configuration (VLAN) mode User Guidelines You can execute the command before the VLAN is created.
Page 533: Ip Igmp Last-Member-Query-Count
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Command Mode Interface Configuration (VLAN) mode User Guidelines You can execute the command before the VLAN is created. Example ip igmp last-member-query-count Use the ip igmp last-member-query-count Interface Configuration mode command to configure the Last Member Query Counter. Use the no format of the command to return to default.
Page 534: Ip Igmp Last-Member-Query-Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm ip igmp last-member-query-interval Use the ip igmp last-member-query-interval Interface Configuration mode command to configure the Last Member Query interval. Use the no format of the command to return to default. Syntax milliseconds ip igmp last-member-query-interval...
Page 535: Show Ip Igmp Snooping Mrouter
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Parameters vlan-id—Specifies the VLAN ID value. (Range: 1–4094) Default Disabled Command Mode Global Configuration mode User Guidelines You can execute the command before the VLAN is created. Example show ip igmp snooping mrouter The show ip igmp snooping mrouter EXEC mode command displays information on dynamically learned multicast router interfaces for all VLANs or for a specific VLAN.
Page 536: Show Ip Igmp Snooping Interface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Example The following example displays information on dynamically learned multicast router interfaces for VLAN 1000. Console# 1000 show ip igmp snooping mrouter interface VLAN Static Dynamic Forbidden ---- ------ ------- --------- 1000 gi1/0/1 gi1/0/2...
Page 537: Show Ip Igmp Snooping Groups
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm IGMP snooping querier admin: Enabled IGMP snooping querier oper: Enabled IGMP snooping querier address admin: IGMP snooping querier address oper: 172.16.1.1 IGMP snooping querier version admin: 3 IGMP snooping robustness: admin 2 oper 2...
Page 538: Show Ip Igmp Snooping Multicast-Tv
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm User Guidelines To see the full multicast address table (including static addresses), use the show bridge multicast address-table command. The Include list contains the ports which are in forwarding state for this group according to the snooping database. In general, the Exclude list contains the ports that have issued an explicit Exclude for that specific source in a multicast group.
Page 539 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm Command Mode EXEC mode Example The following example displays the IP addresses associated with all Multicast TV VLANs. Console# show ip igmp snooping multicast-tv VLAN IP Address ---- ----------- 1000 239.255.0.0 1000 239.255.0.1 1000 239.255.0.2 1000 239.255.0.3...
Page 540 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IGMP_Snooping.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 541: Lacp Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm LACP Commands lacp system-priority Use the lacp system-priority Global Configuration mode command to set the system priority. Use the no form of this command to restore the default configuration. Syntax value lacp system-priority no lacp system-priority Parameters value—Specifies the system priority value.
Page 542: Lacp Port-Priority
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm lacp port-priority Use the lacp port-priority Interface Configuration (Ethernet) mode command to set the physical port priority. Use the no form of this command to restore the default configuration. Syntax value lacp port-priority no lacp port-priority Parameters value—Specifies the port priority.
Page 543: Show Lacp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm Parameters long—Specifies the long timeout value. • • short—Specifies the short timeout value. Default Configuration The default port timeout value is Long. Command Mode Interface Configuration (Ethernet) mode Example The following example assigns a long administrative LACP timeout to gigabitethernet port 1/0/6.
Page 544 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm Example The following example displays LACP information for gigabitethernet port 1/0/1. gi1/0/ Console> show lacp ethernet gi1/0/ Port 1 LACP parameters: Actor system priority: system mac addr: 00:00:12:34:56:78 port Admin key: port Oper key:...
Page 545 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm system priority: system mac addr: 00:00:00:00:00:00 port Admin key: port Oper key: port Oper number: port Admin priority: port Oper priority: port Admin timeout: LONG port Oper timeout: LONG LACP Activity: PASSIVE Aggregation: AGGREGATABLE...
Page 546: Show Lacp Port-Channel
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\LACP.fm show lacp port-channel Use the show lacp port-channel EXEC mode command to display LACP information for a port-channel. Syntax [ port_channel_number ] show lacp port-channel Parameters port_channel_number—Specifies the port-channel number. Command Mode EXEC mode Example The following example displays LACP information about port-channel 1.
Page 547: Gvrp Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm GVRP Commands gvrp enable (Global) Use the gvrp enable Global Configuration mode command to enable the Generic Attribute Registration Protocol (GARP) VLAN Registration Protocol (GVRP) globally. Use the no form of this command to disable GVRP on the device.
Page 548: Garp Timer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm Syntax gvrp enable no gvrp enable Default Configuration GVRP is disabled on all interfaces. Command Mode Interface Configuration (Ethernet, Port-channel) mode User Guidelines An access port does not dynamically join a VLAN because it is always a member of one VLAN only.
Page 549 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm • join—Specifies the GARP join timer. The GARP join timer value specifies the time interval between the two join messages sent by the GARP application. • leave—Specifies the GARP leave timer. The GARP leave timer value...
Page 550: Gvrp Vlan-Creation-Forbid
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm Example The following example sets the leave timer for gigabitethernet port 1/0/6 to 900 milliseconds. Console(config)# interface gigabitethernet 1/0/ Console(config-if)# garp timer leave gvrp vlan-creation-forbid Use the gvrp vlan-creation-forbid Interface Configuration (Ethernet, Port- channel) mode command to disable dynamic VLAN creation or modification.
Page 551: Clear Gvrp Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm prevent VLAN creation or registration on the port. Use the no form of this command to allow dynamic registration of VLANs on a port. Syntax gvrp registration-forbid no gvrp registration-forbid Default Configuration Dynamic registration of VLANs on the port is allowed.
Page 552: Show Gvrp Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm Example The following example clears all GVRP statistical information on gigabitethernet port 1/0/5. Console# clear gvrp statistics ethernet show gvrp configuration Use the show gvrp configuration EXEC mode command to display GVRP configuration information, including timer values, whether GVRP and dynamic VLAN creation are enabled, and which ports are running GVRP .
Page 553: Show Gvrp Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm show gvrp statistics Use the show gvrp statistics EXEC mode command to display GVRP statistics for all interfaces or for a specific interface. Syntax [interface-id] show gvrp statistics Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel.
Page 554: Show Gvrp Error-Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm Port rJIn rEmp rLIn sJIn sEmp sLIn ----- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- show gvrp error-statistics Use the show gvrp error-statistics EXEC mode command to display GVRP error statistics for all interfaces or for a specific interface.
Page 555 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm Port INVPROT INVATYP INVAVAL INVALEN INVEVENT -------- ------- ------- ------- ------- -------- gi1/0/ gi1/0/ gi1/0/ gi1/0/ gi1/0/ gi1/0/ gi1/0/ gi1/0/ D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 556 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\GVRP.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 557: Voice Vlan Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm Voice VLAN Commands The voice vlan id Global Configuration mode command specified the Voice VLAN Identified. The no format of the command returns the value to default. Syntax vlan-id voice vlan id no voice vlan id...
Page 558: Voice Vlan Oui-Table
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm voice vlan oui-table Use the voice vlan oui-table Global Configuration mode command to configure the voice OUI table. Use the no form of this command to restore the default configuration. Syntax {add mac-address-prefix | remove mac-address-prefix}...
Page 559: Voice Vlan Cos Mode
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm User Guidelines The classification of a packet to Packets from VoIP Equipment/Phones is based on the packet’s OUI of the source Mac Address. In MAC addresses, the first three bytes contain a manufacturer ID (Organizationally Unique Identifiers - OUI) and the last three bytes contain a unique station ID.
Page 560: Voice Vlan Cos
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm voice vlan cos Use the voice vlan cos Global Configuration mode command to set the OUI Voice VLAN Class of Service (CoS). Use the no form of this command to restore the default configuration..
Page 561: Voice Vlan Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm Syntax minutes voice vlan aging-timeout no voice vlan aging-timeout Parameters minutes—Specifies the voice VLAN aging timeout interval in minutes. (Range: 1–43200) Default Configuration The default voice VLAN aging timeout interval is 1440 minutes. Command Mode...
Page 562: Voice Vlan Secure
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm User Guidelines The port is added to the voice VLAN if a packet with a source MAC address that is a telephony MAC address (defined by the voice vlan oui-table Global Configuration mode command) is trapped on the port. Note: The packet VLAN ID can be the voice VLAN ID or any other VLAN ID.
Page 563: Show Voice Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm User Guidelines Use this command to specify that packets that are classified to the voice VLAN with a source MAC address that is not a telephony MAC address (defined by the voice vlan oui-table Global Configuration mode command) are discarded.
Page 564 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm Command Mode EXEC mode Example Example 1. switch>show voice vlan Administrate Voice VLAN state is auto-triggered Operational Voice VLAN state is auto-enabled Best Local Voice VLAN-ID is 20 Best Local VPT is 4 Best Local DSCP is 1...
Page 565 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm Example 4. Administrate Voice VLAN state is disabled Operational Voice VLAN state is disabled Best Local Voice VLAN-ID is 20 Best Local VPT is 0 (default) Best Local DSCP is 0 (default) Aging timeout: 1440 minutes...
Page 566 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Voice_VLAN.fm ------------- ------- ------- --------- -------- gi1/0/1 gi1/0/2 gi1/0/3 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 567: Dhcp Snooping And Arp Inspection Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm DHCP Snooping and ARP Inspection Commands ip dhcp snooping Use the ip dhcp snooping Global Configuration mode command to enable Dynamic Host Configuration Protocol (DHCP) Snooping globally. Use the no form of this command to restore the default configuration.
Page 568: Ip Dhcp Snooping Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip dhcp snooping vlan Use the ip dhcp snooping vlan Global Configuration mode command to enable DHCP Snooping on a VLAN. Use the no form of this command to disable DHCP Snooping on a VLAN.
Page 569: Ip Dhcp Snooping Information Option Allowed-Untrusted
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Syntax ip dhcp snooping trust no ip dhcp snooping trust Default Configuration The interface is untrusted. Command Mode Interface Configuration (Ethernet, Port-channel) mode User Guidelines Configure as trusted the ports that are connected to a DHCP server or to other switches or routers.
Page 570: Ip Dhcp Snooping Verify
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Default Configuration DHCP packets with option-82 information from an untrusted port are discarded. Command Mode Global Configuration mode Example The following example allows a device to accept DHCP packets with option- 82 information from an untrusted port.
Page 571: Ip Dhcp Snooping Database
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Example The following example configures a device to verify that the source MAC address in a DHCP packet received on an untrusted port matches the client hardware address. Console(config)# ip dhcp snooping verify ip dhcp snooping database Use the ip dhcp snooping database Global Configuration mode command to enable the DHCP Snooping binding database file.
Page 572: Ip Dhcp Snooping Database Update-Freq
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip dhcp snooping database update-freq Use the ip dhcp snooping database update-freq Global Configuration mode command to set the update frequency of the DHCP Snooping binding database file. Use the no form of this command to restore the default configuration.
Page 573 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm no ip dhcp snooping binding mac-address vlan-id Parameters • mac-address— pecifies a MAC address. vlan-id—Specifies a VLAN number. • • ip-address—Specifies an IP address. • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel.
Page 574: Clear Ip Dhcp Snooping Database
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm clear ip dhcp snooping database Use the clear ip dhcp snooping database Privileged EXEC mode command to clear the DHCP Snooping binding database. Syntax clear ip dhcp snooping database Command Mode Privileged EXEC mode Example The following example clears the DHCP Snooping binding database.
Page 575: Show Ip Dhcp Snooping Binding
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm DHCP snooping is configured on following VLANs: 21 DHCP snooping database is Enabled Relay agent Information option 82 is Enabled Option 82 on untrusted port is allowed Verification of hwaddr field is Enabled DHCP snooping file update frequency is configured to: 6666 seconds...
Page 576: Ip Arp Inspection
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Example The following examples displays the DHCP snooping binding database and configuration information for all interfaces on a device. Console# show ip dhcp snooping binding Update frequency: 1200 Total number of binding: 2 Mac Address...
Page 577: Ip Arp Inspection Vlan
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Example The following example enables ARP inspection on the device. Console(config)# ip arp inspection ip arp inspection vlan Use the ip arp inspection vlan Global Configuration mode command to enable ARP inspection on a VLAN, based on the DHCP Snooping database.
Page 578: Ip Arp Inspection Trust
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip arp inspection trust Use the ip arp inspection trust Interface Configuration (Ethernet, Port- channel) mode command to configure an interface trust state that determines if incoming Address Resolution Protocol (ARP) packets are inspected. Use the no form of this command to restore the default configuration.
Page 579: Ip Arp Inspection Validate
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip arp inspection validate Use the ip arp inspection validate Global Configuration mode command to perform specific checks for dynamic Address Resolution Protocol (ARP) inspection. Use the no form of this command to restore the default configuration.
Page 580: Ip Arp Inspection List Create
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip arp inspection list create Use the ip arp inspection list create Global Configuration mode command to create a static ARP binding list and enters the ARP list configuration mode. Use the no form of this command to delete the list.
Page 581: Ip Arp Inspection List Assign
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip-address mac-address no ip Parameters • ip-address—Specifies the IP address to be entered to the list. mac-address—Specifies the MAC address associated with the IP address. • Default Configuration No static ARP binding is defined.
Page 582: Ip Arp Inspection Logging Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Command Mode Global Configuration mode Example The following example assigns the static ARP binding list Servers to VLAN Console(config)# 37 servers ip arp inspection list assign ip arp inspection logging interval Use the ip arp inspection logging interval Global Configuration mode command to set the minimum time interval between successive ARP SYSLOG messages.
Page 583: Show Ip Arp Inspection
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Example The following example sets the minimum ARP SYSLOG message logging time interval to 60 seconds. Console(config)# ip arp inspection logging interval show ip arp inspection Use the show ip arp inspection EXEC mode command to display the ARP inspection configuration for all interfaces or for a specific interface.
Page 584: Show Ip Arp Inspection List
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm show ip arp inspection list Use the show ip arp inspection list Privileged EXEC mode command to display the static ARP binding list. Syntax show ip arp inspection list Command Mode Privileged EXEC mode Example The following example displays the static ARP binding list.
Page 585: Clear Ip Arp Inspection Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Command Mode EXEC mode User Guidelines To clear ARP Inspection counters use the clear ip arp inspection statistics CLI command. Counters values are kept when disabling the ARP Inspection feature. Example console# show ip arp inspection statistics...
Page 586: Ip Dhcp Information Option
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm ip dhcp information option Use the ip dhcp information option Global Configuration command to enable DHCP option-82 data insertion. Use the no form of this command to disable DHCP option-82 data insertion. Syntax ip dhcp information option...
Page 587 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm Command Mode EXEC mode Example The following example displays the DHCP Option 82 configuration. console# show ip dhcp information option Relay agent Information option is Enabled D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 588 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DHCP_Snooping.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 589: Iscsi Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm iSCSI Commands iscsi enable Use the iscsi enable Global Configuration mode command to globally enable Internet Small Computer System Interface (iSCSI) awareness. This command changes the Flow Control global mode to receive-only, enables Flow Control on all interfaces, and enables jumbo frames.
Page 590: Iscsi Target Port
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm Example The following example enables iSCSI awareness globally. Console(config)# iscsi enable iscsi target port Use the iscsi target port Global Configuration mode command to configures iSCSI target ports. Use the no form of this command to delete the iSCSI target ports.
Page 591: Iscsi Cos
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm Command Mode Global Configuration mode User Guidelines When working with private iSCSI ports (not IANA assigned iSCSI ports 3260 and 860), it is recommended that the target IP address also be specified, so that the device snoops only frames for which its TCP destination port is one of the configured TCP ports and their destination IP is the target's IP address.
Page 592 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm Syntax iscsi cos enable iscsi cos disable vpt vpt dscp dscp remark iscsi cos { Parameters • enable – enables iSCSI CoS vpt —Specifies the VLAN Priority Tag (VPT) that iSCSI frames are •...
Page 593: Iscsi Aging-Time
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm scheduling is strict priority. The downside of strict priority queuing is that in certain circumstances (heavy high priority traffic), lower priority traffic may become bandwidth-starved. In WRR, the queue to which the flow is assigned can be set to get the required percentage.
Page 594: Iscsi Max-Tcp-Connections
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm When changing the iSCSI session aging time, the following occurs: • If the aging time is increased, the aging time for the current session is recalculated and increased by the difference between the new aging time and the current aging time.
Page 595: Show Iscsi
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm User Guidelines The new setting will take affect only after reset. This command enables the user to define the number of iSCSI connections supported in the system. The amount of iSCSI sessions has effect on the system memory consumption.
Page 596: Show Iscsi Sessions
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm Example The following example display the iSCSI configuration. Console# show iscsi iSCSI disabled iSCSI COS disabled iSCSI vpt is 5, Remark iSCSI aging time: 5 min. Maximum number of connections: 256 iSCSI targets and TCP ports:...
Page 597 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm User Guidelines The target list is not sorted alphabetically. The aging mechanism checks session activity in a group of N TCP iSCSI connections. In the worst case, if all 256 sessions are monitored and are not terminated gracefully, the existing mechanism causes inaccuracies;...
Page 598 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\iSCSI.fm Initiator: iqn.1992-04.com.os- vendor.plan9:cdrom.12.storage:sys1.xyz UP Time: 02:10:45 (DD:HH:MM) Time for aging out: 10 min ISID: 11 Initiator Initiator Target Target IP Address TCP Port IP Address IP Port ---------- --------- ----------- ------- 172.16.1.3 49154 172.16.1.20 30001 172.16.1.4...
Page 599: Ip Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm IP Addressing Commands address Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel) mode command to define an IP address for an interface. Use the no form of this command to remove an IP address definition.
Page 600 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Default Configuration No IP address is defined for interfaces. Command Mode Interface Configuration (Ethernet, VLAN, Port-channel) mode. It cannot be configured for a range of interfaces (range context). User Guidelines Defining a static IP address on an interface implicitly removes the DHCP client configuration on the interface.
Page 601: Ip Address Dhcp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Console(config-if)# 131.108.1.27 255.255.255.0 ip address ip address dhcp Use the ip address dhcp Interface Configuration (Ethernet, VLAN, Port- channel) mode command to acquire an IP address for an Ethernet interface from the Dynamic Host Configuration Protocol (DHCP) server. Use the no form of this command to release an acquired IP address.
Page 602: Renew Dhcp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example acquires an IP address for gigabitethernet port 1/0/16 from DHCP . Console(config)# gigabitethernet 1/0/16 interface Console(config-if)# ip address dhcp renew dhcp Use the renew dhcp Privileged EXEC mode command to renew an IP address that was acquired from a DHCP server for a specific interface.
Page 603: Ip Default-Gateway
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example renews an IP address that was acquired from a DHCP server for VLAN 19. Console# renew dhcp vlan ip default-gateway The ip default-gateway Global Configuration mode command defines a default gateway (device). Use the no form of this command to restore the default configuration.
Page 604: Arp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Syntax [interface-id ] show ip interface Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port, Port-channel or VLAN. Command Mode EXEC mode Example The following example displays the configured IP interfaces and their types.
Page 605: Arp Timeout (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Command Mode Global Configuration mode Default Configuration No permanent entry is defined. User Guidelines The software uses ARP cache entries to translate 32-bit IP addresses into 48- bit hardware (MAC) addresses. Because most hosts support dynamic address resolution, static ARP cache entries generally do not need to be specified.
Page 606: Arp Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Command Mode Global Configuration mode Example The following example configures the ARP timeout to 12000 seconds. Console(config)# 12000 arp timeout arp timeout Use the arp timeout inTerface Configuration command to configure how long an entry remains in the ARP cache for specific interface. Use the no form of this command restore the default value.
Page 607: Ip Arp Proxy Disable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm ip arp proxy disable Use the ip arp proxy disable Global Configuration mode command to globally disable proxy Address Resolution Protocol (ARP). Use the no form of this command reenable proxy ARP . Syntax...
Page 608: Clear Arp-Cache
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Command Mode Interface Configuration (Ethernet, VLAN, Port-channel) mode. It cannot be configured for a range of interfaces (range context). User Guidelines This configuration can be applied only if at least one IP address is defined on a specific interface.
Page 609: Show Arp Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Parameters ip-address ip-address—Specifies the IP address. • mac-address mac-address • —Specifies the MAC address. • interface-id_Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel. Command Mode...
Page 610: Interface Ip
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Parameters This command has no arguments or key words. Command Mode Privileged EXEC mode Example Console# show arp configuration Global configuration: ARP Proxy: enabled ARP timeout: 80000 Seconds Interface configuration: ARP Proxy: disabled ARP timeout:60000 Seconds...
Page 611: Directed-Broadcast
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Command Mode Global Configuration mode Example The following example enters the IP interface configuration mode. Console (config)# 192.168.1.1 interface ip Console (config-ip)# directed-broadcast Use the directed-broadcast IP Interface Configuration mode command to enable the translation of a directed broadcast to physical broadcasts. Use the no form of this command to disable this function.
Page 612: Broadcast-Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm broadcast-address Use the broadcast-address IP Interface Configuration mode command to define a broadcast address for an interface. Use the no form of this command to restore the default IP broadcast address. Syntax {255.255.255.255 | 0.0.0.0}...
Page 613 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Syntax ip-interface | all} address udp-port-list ip helper-address { ip-interface | all} address no ip helper-address { Parameters • ip-interface—Specifies the IP interface. • all—Specifies all IP interfaces. address—Specifies the destination broadcast or host address to which to •...
Page 614: Show Ip Helper-Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm default, if no UDP port number is specified, the device forwards UDP broadcast packets for the following six services: • IEN-116 Name Service (port 42) • DNS (port 53) • NetBIOS Name Server (port 137) •...
Page 615: Source-Precedence
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example displays the IP helper addresses configuration on the system. Console# show ip helper-address Interface Helper Address Udp ports ------------ -------------- ------------------------ 192.168.1.1 172.16.8.8 37, 42, 49, 53, 137, 138 192.168.2.1 172.16.9.9...
Page 616: Ip Domain Lookup
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example defines a preference for an IP address as a source IP address for DHCP relayed messages on an interface. Console (config-ip)# source-precedence ip domain lookup Use the ip domain lookup Global Configuration mode command to enable the IP Domain Name System (DNS)-based host name-to-address translation.
Page 617: Ip Name-Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Syntax name ip domain name no ip domain name Parameters name—Specifies the default domain name used to complete unqualified host names. Do not include the initial period that separates an unqualified name from the domain name. (Length: 1–158 characters. Maximum label length:...
Page 618 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Syntax { server1-ipv4-address | server1-ipv6-address} [server- ip name-server address2 … server-address8] server-address server-address8 no ip name-server [ … Parameters server-address—IP addresses of the name server. Up to 8 servers can be defined in one command or by using multiple commands. The IP address can be IPv4 address or IPv6 address.
Page 619: Ip Host
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example defines the available name server. Console(config)# 176.16.1.18 ip name-server ip host Use the ip host Global Configuration mode command to define the static host name-to-address mapping in the host cache. Use the no form of this command to remove the static host name-to-address mapping.
Page 620: Clear Host
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Console(config)# accounting.website.com 176.10.23.1 ip host clear host Use the clear host Privileged EXEC mode command to delete entries from the host name-to-address cache. Syntax {name | *} clear host Parameters • name—Specifies the host entry to remove. (Length: 1–158 characters.
Page 621: Show Hosts
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm • *—Removes all entries. Command Mode Privileged EXEC mode User Guidelines This command deletes the host name-to-address mapping temporarily until the next refresh of the IP addresses. Example The following example deletes all entries from the host name-to-address mapping received from DHCP .
Page 622 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Addressing.fm Example The following example displays host information. Console> show hosts System name: Device Default domain is gm.com, sales.gm.com, usa.sales.gm.com(DHCP) Name/address lookup is enabled Name servers (Preference order): 176.16.1.18 176.16.1.19 Configured host name-to-address mapping: Host...
Page 623: Ipv6 Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm IPv6 Addressing Commands ipv6 enable Use the ipv6 enable Interface Configuration (Ethernet, VLAN, Port-channel) mode command to enable the IPv6 addressing mode on an interface. Use the no form of this command to disable the IPv6 addressing mode on an interface.
Page 624: Ipv6 Address Autoconfig
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm processing. The no ipv6 enable command removes the entire IPv6 interface configuration. To enable stateless address autoconfiguration on an enabled IPv6 interface, use the IPv6 address autoconfig command. Example The following example enables VLAN 1 for the IPv6 addressing mode.
Page 625: Ipv6 Icmp Error-Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm User Guidelines When address autoconfig is enabled, router solicitation ND procedure is initiated to discover a router and assign IP addresses to the interface, based on the advertised on-link prefixes. When disabling address autoconfig, automatically generated addresses that are assigned to the interface are removed.
Page 626: Show Ipv6 Icmp Error-Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Default Configuration The default interval is 100ms and the default bucketsize is 10 i.e. 100 ICMP error messages per second Command Mode Global Configuration mode User Guidelines To set the average ICMP error rate limit, calculate the interval with the...
Page 627: Ipv6 Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm ipv6 address Use the ipv6 address Interface Configuration mode command to configure an IPv6 address for an interface. Use the no form of this command To remove the address from the interface. Syntax ipv6-address/prefix-length [eui-64] [anycast]...
Page 628: Ipv6 Address Link-Local
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Using the no IPv6 address command without arguments removes all manually configured IPv6 addresses from an interface, including link local manually configured addresses. Example console(config)# interface vlan 1 console(config-if)# ipv6 address 3000::123/64 eui-64 anycast...
Page 629: Ipv6 Unreachables
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm User Guidelines Using the no ipv6 link-local address command removes the manually configured link local IPv6 address from an interface. Multiple IPv6 addresses can be configured per interface, but only one link-local address. When the no...
Page 630: Ipv6 Default-Gateway
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm User Guidelines When ICMP unreachable messages are enabled, when receiving a packet addressed to one of the interface's IP address with TCP/UDP port not assigned, the device sends ICMP unreachable messages. Use the no ipv6 unreachables command to disable sending ICMP unreachable messages on the interface.
Page 631: Show Ipv6 Interface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm interface-name = vlan<integer> | ch<integer> | <physical-port-name> | integer = <decimal-number> | <integer><decimal-number> decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 physical-port-name = Designated port number, for example 1/0/16.
Page 632 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Command Mode EXEC mode User Guidelines Use the show ipv6 neighbors command in the privileged EXEC mode to display IPv6 neighbor discovery cache information. Example Console# show ipv6 interface Interface IP addresses Type -----------...
Page 633: Show Ipv6 Route
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm ------------------------------------- --------- ----------- 4004::55/64 [ANY] manual Active fe80::200:b0ff:fe00:0 linklayer Active ff02::1 linklayer ------ ff02::77 manual ------ ff02::1:ff00:0 manual ------ ff02::1:ff00:1 manual ------ ff02::1:ff00:55 manual ------ show IPv6 route Use the show ipv6 route command to display the current state of the IPv6 routing table.
Page 634: Ipv6 Nd Dad Attempts
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm ipv6 nd dad attempts Use the ipv6 nd dad attempts Interface Configuration (Ethernet, VLAN, Port-channel) mode command to configure the number of consecutive neighbor solicitation messages that are sent on an interface while Duplicate Address Detection (DAD) is performed on the unicast IPv6 addresses of the interface.
Page 635: Ipv6 Host
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm When DAD identifies a duplicate address, the address state is set to DUPLICATE and the address is not used. If the duplicate address is the Link Local address of the interface, the processing of IPv6 packets is disabled on the interface and an error message is displayed.
Page 636: Ipv6 Neighbor
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Parameters nameName of the host. (Range: 1–158 characters) ipv6-address1—Associated IPv6 address. This argument must be in the • form documented in RFC 2373 where the address is specified in hexadecimal using 16-bit values between colons. When the IPv6 address is a Link Local address (IPv6Z address), the outgoing interface name must be specified.
Page 637: Ipv6 Set Mtu
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Syntax ipv6_addr interface-id hw_addr ipv6 neighbor ipv6_addr interface-id no ipv6 neighbor Parameters • Ipv6_addr—Specifies the Pv6 address to map to the specified MAC address. • interface-id—Specifies the interface that is associated with the IPv6 address •...
Page 638: Ipv6 Mld Version
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Syntax { interface-id } { bytes | default} ipv6 set mtu Parameters • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel. • bytes—Specifies the MTU in bytes.
Page 639: Ipv6 Mld Join-Group
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Default Configuration MLD version 1. Command Mode Interface Configuration (Ethernet, VLAN, Port-channel) mode console(config)# interface vlan 1 console(config-if)# ipv6 mld version 2 ipv6 mld join-group Use the ipv6 mld join-group Interface Configuration mode command to configure Multicast Listener Discovery (MLD) reporting for a specified group.
Page 640: Show Ipv6 Neighbors
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Example The following example configures MLD reporting for specific groups: ipv6 mld join-group ff02::10 show ipv6 neighbors Use the show ipv6 neighbors Privileged EXEC mode command to display IPv6 neighbor discovery cache information. Syntax...
Page 641: Clear Ipv6 Neighbors
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm • INCMP (Incomplete)—Address resolution is being performed on the entry. Specifically, a Neighbor Solicitation has been sent to the solicited- node multicast address of the target, but the corresponding Neighbor Advertisement has not yet been received.
Page 642 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IPv6_Addressing.fm Syntax clear ipv6 neighbors Parameters This command has no keywords or arguments. Command Mode Privileged EXEC mode Example console# clear ipv6 neighbors D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 643: Tunnel Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Tunnel Commands interface tunnel Use the interface tunnel Global Configuration mode command to enter the Interface Configuration (Tunnel) mode. Syntax number interface tunnel Parameters number—Specifies the tunnel index. Command Mode Global Configuration mode Example The following example enters the Interface Configuration (Tunnel) mode.
Page 644: Tunnel Isatap Router
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm ipv6ip no tunnel mode Parameters isatap—Enables an automatic IPv6 over IPv4 Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnel. Default Configuration The IPv6 transition-mechanism global support mode is disabled. Command Mode Interface Configuration (Tunnel) mode User Guidelines The system can be enabled to ISATAP tunnel.
Page 645: Tunnel Source
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm no tunnel isatap router Parameters router-name—Specifies the router’s domain name. Default Configuration The automatic tunnel router's default domain name is ISATAP . Command Mode Interface Configuration (Tunnel) mode User Guidelines The ipv6 tunnel routers-dns command determines the string that the host uses for automatic tunnel router lookup in the IPv4 DNS procedure.
Page 646: Tunnel Isatap Query-Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Parameters • auto—The system minimum IPv4 address is used as the source address for packets sent on the tunnel interface. If the IPv4 address is changed, then the local address of the tunnel interface is changed too.
Page 647: Tunnel Isatap Solicitation-Interval
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Parameters seconds—Specifies the time interval in seconds between DNS queries. (Range: 10–3600) Default Configuration The default time interval between DNS queries is 10 seconds. Command Mode Global Configuration mode User Guidelines This command determines the time interval between DNS queries before the ISATAP router IP address is known.
Page 648: Tunnel Isatap Robustness
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Default Configuration The default time interval between ISATAP router solicitation messages is 10 seconds. Command Mode Global Configuration mode User Guidelines This command determines the interval between router solicitation messages when there is no active ISATAP router. If there is an active ISATAP router, the robustness level set by the tunnel isatap robustness Global Configuration mode command determines the refresh rate.
Page 649: Show Ipv6 Tunnel
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Command Mode Global Configuration mode User Guidelines The DNS query interval (after the ISATAP router IP address is known) is the Time-To-Live (TTL) that is received from the DNS, divided by (Robustness + 1).
Page 650 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\Tunnel.fm Tunnel protocol : NONE Tunnel Local address type : auto Tunnel Local Ipv4 address : 0.0.0.0 Router DNS name : ISATAP Router IPv4 address : 0.0.0.0 DNS Query interval : 300 seconds Min DNS Query interval...
Page 651: Dhcp Relay Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm DHCP Relay Commands ip dhcp relay enable (Global) Use the ip dhcp relay enable Global Configuration mode command to enable Dynamic Host Configuration Protocol (DHCP) relay features on the device. Use the no form of this command to disable the DHCP relay agent.
Page 652: Ip Dhcp Relay Address (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm Syntax ip dhcp relay enable no ip dhcp relay enable Default Configuration Disabled Command Mode Interface Configuration (VLAN) mode Interface Configuration (VLAN, Ethernet, Port-channel) mode User Guidelines Enable DHCP relay globally before enabling DHCP relay on an interface.
Page 653: Ip Dhcp Relay Address (Interface)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm Command Mode Global Configuration mode Example The following example defines the DHCP server on the device. Console(config)# 176.16.1.1 ip dhcp relay address ip dhcp relay address (Interface) Use the ip dhcp relay address Interface Configuration (VLAN, Ethernet, Port-channel) command to define the DHCP servers available by the DHCP relay for DHCP clients connected to the interface.
Page 654: Show Ip Dhcp Relay
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm You can use the command regardless if DHCP Relay is enabled on the interface. Example The following example defines the DHCP server on VLAN 21. Console(config)# interface vlan Console(config-if)# 176.16.1.1 ip dhcp relay address...
Page 655: Ip Dhcp Information Option
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm DHCP relay is globally enabled. DHCP relay is enabled on VLANs: 1, 2 Servers: 172.16.1.11, 172.16.8.11 ip dhcp information option Use the ip dhcp information option Global Configuration command to enable DHCP option-82 data insertion. Use the no form of this command to disable DHCP option-82 data insertion.
Page 656: Show Ip Dhcp Information Option
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Relay.fm show ip dhcp information option The show ip dhcp information option EXEC mode command displays the DHCP Option 82 configuration. Syntax show ip dhcp information option Command Mode EXEC mode Example The following example displays the DHCP Option 82 configuration.
Page 657: Dhcp Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm DHCP Server Commands ip dhcp server Use the ip dhcp server Global Configuration mode command to enable the Dynamic Host Configuration Protocol (DHCP) server features on the device. Use the no form of this command to disable the DHCP server.
Page 658: Ip Dhcp Pool Network
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Syntax name ip dhcp pool host name no ip dhcp pool host Parameters name—Specifies the DHCP address pool name. It can be either a symbolic string (such as Engineering) or an integer (such as 8). (Length: 1–32...
Page 659: Address (Dhcp Host)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm name no ip dhcp pool network Parameters name—Specifies the DHCP address pool name. It can be either a symbolic string (such as ‘engineering’) or an integer (such as 8). (Length: 1–32 characters) Default Configuration DHCP address pools are not configured.
Page 660: Address (Dhcp Network)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Parameters • address—Specifies the client IP address. • mask—Specifies the client network mask. prefix-length—Specifies the number of bits that comprise the address • prefix. The prefix is an alternative way of specifying the client network mask.
Page 661: Lease
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Parameters network-number—Specifies the IP address of the DHCP address pool. • • mask—Specifies the pool network mask. • prefix-length—Specifies the number of bits that comprise the address prefix. The prefix is an alternative way of specifying the client network mask.
Page 662 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Syntax days hours minutes ] | infinite} lease { no lease Parameters • days—Specifies the number of days in the lease. • hours—Specifies the number of hours in the lease. A days value must be...
Page 663: Client-Name
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm client-name Use the client-name DHCP Pool Host Configuration mode command to define the name of a DHCP client. The client name should not include the domain name. Use the no form of this command to remove the client name.
Page 664: Dns-Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Parameters ip-address—Specifies the IP address of a router. One IP address is required, although up to eight addresses can be specified in one command line. Command Mode DHCP Pool Host Configuration mode DHCP Pool Network Configuration mode Default Configuration No default router is defined.
Page 665: Domain-Name
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm DHCP Pool Network Configuration mode Default Configuration No DNS server is defined. User Guidelines If DNS IP servers are not configured for a DHCP client, the client cannot correlate host names to IP addresses.
Page 666: Netbios-Name-Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Example The following example specifies yahoo.com as the DHCP client domain name string. Console(config-dhcp)# yahoo.com domain-name netbios-name-server Use the netbios-name-server DHCP Pool Configuration mode command to configure the NetBIOS Windows Internet Naming Service (WINS) servers that are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
Page 667: Netbios-Node-Type
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm netbios-node-type Use the netbios-node-type DHCP Pool Configuration mode command to configure the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP) clients. Use the no form of this command to remove the NetBIOS node type.
Page 668: Next-Server-Name
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Syntax ip-address next-server no next-server Parameters ip-address —Specifies the IP address of the next server in the boot process, which is typically a Trivial File Transfer Protocol (TFTP) server. Default Configuration If the next-server command is not used to configure a boot server list, the DHCP Server uses inbound interface helper addresses as boot servers.
Page 669: Bootfile
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Command Mode DHCP Pool Host Configuration mode DHCP Pool Network Configuration mode Default Configuration No next server name is defined. Example The following example specifies www.bootserver.com as the name of the next server in the boot process of a DHCP client.
Page 670: Time-Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Example The following example specifies boot_image_file as the default boot image file name for a DHCP client. Console(config-dhcp)# boot_image_file bootfile time-server Use the time-server DHCP Pool Configuration mode command to specify the time servers list for a Dynamic Host Configuration Protocol (DHCP) client.
Page 671: Option
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm option Use the option DHCP Pool Configuration mode command to configure the Dynamic Host Configuration Protocol (DHCP) Server options. Use the no form of this command to remove the options. Syntax code {ascii ascii-string | hex hex-string | ip ip-address}...
Page 672: Ip Dhcp Excluded-Address
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Dynamic Host current set of DHCP options are documented in RFC 2131, Configuration Protocol For options in hexadecimal format, the string parameter should include all the bytes in the option value, including leading zeros.
Page 673: Ip Dhcp Ping Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Parameters low-address—Specifies the excluded IP address, or first IP address in an • excluded address range. • high-address—Specifies the last IP address in the excluded address range. Default Configuration All IP pool addresses are assignable.
Page 674: Ping Enable
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Command Mode Global Configuration mode User Guidelines The DHCP Server pings a pool address before assigning the address to a requesting client. If the ping is unanswered, the DHCP Server assumes (with a high probability) that the address is not in use and assigns the address to the requesting client.
Page 675: Ip Dhcp Ping Count
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Example The following example enables the DHCP Server to send ping packets before assigning the address to a requesting client. Console(config-dhcp)# ping enable ip dhcp ping count Use the ip dhcp ping count Global Configuration mode command to specify the number of packets a Dynamic Host Configuration Protocol (DHCP) Server sends to a pool address as part of a ping operation.
Page 676: Ip Dhcp Ping Timeout
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm ip dhcp ping timeout The ip dhcp ping timeout Global Configuration mode command specifies the time interval during which a Dynamic Host Configuration Protocol (DHCP) Server waits for a ping reply from an address pool. To restore the default timeout, use the no form of this command.
Page 677: Clear Ip Dhcp Binding
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm clear ip dhcp binding The clear ip dhcp binding Privileged EXEC mode command deletes the dynamic address binding from the Dynamic Host Configuration Protocol (DHCP) Server database. Syntax address clear ip dhcp binding {...
Page 678: Show Ip Dhcp Excluded-Addresses
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Command Mode EXEC mode Example The following example displays the DHCP configuration. Console> show ip dhcp DHCP server is enabled. DHCP ping packets is enabled with 2 retries and 500 milliseconds. show ip dhcp excluded-addresses The show ip dhcp excluded-addresses EXEC mode command displays the excluded addresses.
Page 679 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Syntax address name show ip dhcp pool host [ Parameters address • — Specifies the client IP address. name • — Specifies the DHCP pool name. (Length: 1-32 characters) Command Mode EXEC mode Example The following example displays the DHCP pool host configuration.
Page 680: Show Ip Dhcp Pool Network
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Mask: 255.255.0.0 Default router: 172.16.1.1 Client name: client1 DNS server: 10.12.1.99 Domain name: yahoo.com NetBIOS name server: 10.12.1.90 NetBIOS node type: h-node Next server: 10.12.1.99 Next-server-name: 10.12.1.100 Bootfile: Bootfile Time server 10.12.1.99 Options: Code...
Page 681: Show Ip Dhcp Binding
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm marketing 10.1.1.17-10.1.1.178 255.255.255.0 0d:12h:0m finance 10.1.2.8-10.1.2.178 255.255.255.0 0d:12h:0m Router> show ip dhcp pool network marketing Name Address range mask Lease --------------------------------- ------------------------ marketing 10.1.1.17-10.1.1.178 255.255.255.0 0d:12h:0m Statistics: All-range Available Free Pre-allocated Allocated Expired Declined...
Page 682 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Command Mode EXEC mode Example The following example displays the DHCP Server binding address parameters. Router> show ip dhcp binding DHCP server enabled The number of used (all types) entries is 5 The number of pre-allocated entries is 1...
Page 683: Show Ip Dhcp Server Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm DHCP server enabled The number of used (all types) entries is 5 The number of pre-allocated entries is 1 The number of allocated entries is 1 The number of expired entries is 1 The number of declined entries is 2...
Page 684: Show Ip Dhcp Allocated
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm Example The following example displays DHCP Server statistics DHCP server enabled The number of network pools is 6 The number of excluded pools is 2 The number of used (all types) entries is 7...
Page 685 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm The number of allocated entries is 3 The number of static entries is 1 The number of dynamic entries is 1 The number of automatic entries is 1 IP address Hardware address Lease expiration...
Page 686: Show Ip Dhcp Declined
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm The following table describes the significant fields shown in the display. F i e ld D e sc r ip ti o n IP address The host IP address as recorded on the DHCP Server.
Page 687: Show Ip Dhcp Expired
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm IP address Hardware address 172.16.1.1100a0.9802.32de 172.16.1.12 show ip dhcp declined Field Descriptions • IP address—The IP address of the host as recorded on the DHCP Server. • Hardware address—The MAC address or client identifier of the host as recorded on the DHCP Server.
Page 688: Show Ip Dhcp Pre-Allocated
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm IP address Hardware address 172.16.1.1300a0.9802.32de 172.16.1.14 show ip dhcp expired Field Descriptions • IP address—The IP address of the host as recorded on the DHCP Server. • Hardware address—The MAC address or client identifier of the host as recorded on the DHCP Server.
Page 689 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm IP address Hardware address 172.16.1.1500a0.9802.32de 172.16.1.16 show ip dhcp declined Field Descriptions IP address—The IP address of the host as recorded on the DHCP Server. • • Hardware address—The MAC address or client identifier of the host as recorded on the DHCP Server.
Page 690 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\DCHP_Server.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...
Page 691: Ip Routing Protocol-Independent Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Routing.fm IP Routing Protocol-Independent Commands ip route Use the ip route Global Configuration mode command to configure static routes. Use the no form of this command to remove static routes. Syntax prefix mask prefix-length ip-address [metric distance] [reject-...
Page 692: Ip Routing
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Routing.fm Command Mode Global Configuration mode Example The following example configures a static route with prefix 172.16.0.0, prefix length 16, and gateway 131.16.1.1. Console(config)# 172.16.0.0 /16 131.16.1.1 ip route ip routing Use the ip routing Global Configuration mode command to enable IPv4 Routing.
Page 693 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Routing.fm Parameters connected—Displays connected routing entries only. • • static—Displays static routing entries only. • address address—Specifies the address for which routing information is displayed. • mask—Specifies the network subnet mask of the IP address.
Page 694 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\IP_Routing.fm Console> 172.1.1.0 255.255.255.0 show ip route address longer- prefixes Codes: C - connected, S - static, E - OSPF external S 172.1.1.0/24 [5/3] via 10.0.2.1, 17:12:19, Ethernet1 S 172.1.1.1/32 [5/3] via 10.0.3.1, 19:51:18, Ethernet1...
Page 695: Acl Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm ACL Commands Use the ip access-list global configuration mode command to define an IPv4 access list and to place the device in IPv4 access list configuration mode. Use the no form of this command to remove the access list.
Page 696: Permit ( Ip )
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm permit ( IP ) Use the permit IP Access-list Configuration mode command to set permit conditions for IPv4 access list. Syntax protocol {any | source source-wildcard} {any | destination permit destination-wildcard} [dscp number | precedence number] [time-range...
Page 697 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm dscp number—Specifies the DSCP value. • precedence number—Specifies the IP precedence value. • icmp-type—Specifies an ICMP message type for filtering ICMP packets. • Enter a number or one of the following values: echo-reply, destination-...
Page 698: Deny ( Ip )
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm ack, -psh, -rst, -syn and -fin. The flags are concatenated to a one string. For example: +fin-ack. time-range-name—Name of the time range that applies to this permit • statement. (Range: 1–32) Default No IPv4 access list is defined.
Page 699 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Syntax protocol {any | source source-wildcard} {any | destination destination- deny wildcard} [dscp number | precedence number] [time-range time-range- name] [disable-port | log-input] icmp {any | source source-wildcard} {any | destination destination- deny wildcard{any|icmp-type} {any|icmp-code} [dscp number | precedence...
Page 700 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm parameter-problem, timestamp, timestamp-reply, information-request, information-reply, address-mask-request, address-mask-reply, traceroute, datagram-conversion-error, mobile-host-redirect, mobile-registration- request, mobile-registration-reply, domain-name-request, domain-name- reply, skip, photuris. (Range: 0–255) icmp-code—Specifies an ICMP message code for filtering ICMP • packets. (Range: 0–255) igmp-type—IGMP packets can be filtered by IGMP message type. Enter •...
Page 701: Configuration Command
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm log-input—Specifies sending an informational syslog message about the • packet that matches the entry. Because forwarding is done in hardware and logging is done in software, if a large number of packets match a deny ACE containing a log-input keyword, the software might not be able to match the hardware processing rate, and not all packets will be logged.
Page 702: Ipv6 Access-List
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm ipv6 access-list Use the ipv6 access-list global configuration mode command to define an IPv6 access list and to place the device in IPv6 access list configuration mode. Use the no form of this command to remove the access list.
Page 703: Permit ( Ipv6 )
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Switch (config)# ipv6 access-list acl1 Switch(config-ipv6-acl)# permit tcp 2001:0DB8:0300:0201::/64 any any 80 permit ( IPv6 ) Use the permit command in IPv6 Access-list Configuration mode to set permit conditions for IPv6 access list. Syntax...
Page 704 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm precedence number—Specifies the IP precedence value. • icmp-type—Specifies an ICMP message type for filtering ICMP packets. • Enter a number or one of the following values: destination-unreachable (1), packet-too-big (2), time-exceeded (3), parameter-problem (4), echo-...
Page 705: Deny ( Ipv6 )
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Command Mode Ipv6 Access-list Configuration mode User Guidelines The number of TCP/UDP ranges that can be defined in ACLs is limited. You can define up to #ASIC-specific ranges for TCP and up to #ASIC-specific ranges for UDP.
Page 706 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm udp {any | {source-prefix/length }} {any | source-port/port-range} deny }{any | destination- prefix/length } {any| destination-port/port-range} [dscp number | precedence number] [time-range time-range-name] [disable-port | log-input] Parameters protocol—The name or the number of an IP protocol. Available protocol •...
Page 707 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm netbios-dgm (138), netbios-ns (137), non500-isakmp (4500), ntp (123), rip (520), snmp (161), snmptrap (162), sunrpc (111), syslog (514), tacacs (49), talk (517), tftp (69), time (37), who (513), xdmcp (177). (Range: 0–65535) source-port—Specifies the UDP/TCP source port. Predefined port names •...
Page 708: Mac Access-List
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Example console(config)# ipv6 access-list server console(config-ipv6-al)# deny tcp 3001::2/64 any any 80 mac access-list Use the mac access-list Global Configuration mode command to define a Layer 2 access list and to place the device in MAC access list configuration mode.
Page 709 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Syntax {any | source source-wildcard} {any | destination destination-wildcard} [eth-type permit 0| aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm | etype-6000] [vlan vlan-id] [cos cos cos-wildcard] [time-range time-range-name] Parameters source—Source MAC address of the packet.
Page 710: Service-Acl Input
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm console(config-mac-al)# permit 00:00:00:00:00:01 00:00:00:00:00:ff any service-acl input use the service-acl input command in interface configuration mode to control access to an interface. Use the no form of this command to remove the access control.
Page 711: Service-Acl Output
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm console(config-if)# service-acl input server service-acl output Use the service-acl output command in Interface Configuration mode to control access to an interface on the Egress (transmit path). Use the no form of this command to remove the access control..
Page 712: Service-Acl Input Block
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm console(config)# mac access-list extended server console(config-mac-al)# permit 00:00:00:00:00:01 00:00:00:00:00:ff any console(config-mac-al)# exit gigabitethernet 1/0/1 console(config)# interface console(config-if)# service-acl output server service-acl input block Use the service-acl input block Interface Configuration mode commands to discard packets that are classified to specific protocols. Use the no form of those commands to disable discarding of the packets.
Page 713: Time-Range
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm If ACL or Policy Map or Security suite rules are assigned to an interface or 802.1X Dynamic Policy Assignment is enabled for an interface, the user is not able to assign Proprietary Protocol Filtering rules to that interface.
Page 714: Absolute
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Command Mode Global Configuration mode User Guidelines After the time-range command, use the periodic time-range configuration command and the absolute time-range configuration command. Multiple periodic commands are allowed in a time range. Only one absolute command is allowed.
Page 715: Periodic
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Parameters start—Absolute time and date that the permit or deny statement of the • associated access list starts going into effect. If no start time and date are specified, the permit or deny statement is in effect immediately.
Page 716: Show Time-Range
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Parameters day-of-the-week—The starting day that the associated time range is in • effect. The second occurrence is the ending day the associated statement is in effect. The second occurrence can be the following week (see description in the User Guidelines).
Page 717: Show Access-Lists
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Parameters time-range-name—Specifies the name of the time range. (Range: 1–32) Command Mode EXEC mode Example Console# show time-range http-allowed -------------- absolute start 12:00 1 jan 2005 absolute end 12:00 31 dec 2005 periodic monday 8:00 to friday 20:00...
Page 718 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Router# show access-lists Standard IP access list 1 deny Standard IP access list 2 deny 192.168.0.0, wildcard bits 0.0.0.255 permit any Standard IP access list 3 deny 0.0.0.0 deny 192.168.0.1, wildcard bits 0.0.0.255 permit any Standard IP access list 4 permit 0.0.0.0...
Page 719: Show Interfaces Access-Lists
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm show interfaces access-lists Use the show interfaces access-lists Privileged EXEC mode command to display access lists applied on interfaces. Syntax [interface-id ] show interfaces access-lists Parameters interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port, Port-channel or VLAN.
Page 720: Show Interfaces Access-Lists Counters
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm Command Mode Privileged EXEC mode Example gigabitethernet 1/0/1 console# clear access-lists counters show interfaces access-lists counters Use the show interfaces access-lists counters Privileged EXEC mode command to display Access List counters. Syntax [ ethernet interface | port-channel port-...
Page 721 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm gi1/0/3 Number of hits that were counted in global counter (due to lack of resources) =19 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 0 1 2 - F O R P R O O F O N LY...
Page 722 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\ACL.fm D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 0 1 2 - F O R P R O O F O N LY...
Page 723: Quality Of Service (Qos) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Quality of Service (QoS) Commands Use the qos Global Configuration mode command to enable Quality of Service (QoS) on the device. Use the no form of this command to disable QoS on the device...
Page 724: Show Qos
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm show qos Use the show qos EXEC mode command to display the Quality of Service (QoS) mode for the device. The trust mode is displayed for the QoS basic mode. Syntax show qos Parameters This command has no arguments or keywords.
Page 725: Class-Map
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Qos: disable Trust: dscp class-map Use the class-map Global Configuration mode command to create or modify a class map and enters the Class-map Configuration mode. Use the no form of this command todelete a class map.
Page 726: Show Class-Map
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm order is important. The class-map command and its subcommands are used to define packet classification, marking, and aggregate policing as part of a globally named service policy applied on a per-interface basis. If there is more than one match statement in a match-all class map and if there is a repetitive classification field in the participating ACLs, an error message is generated.
Page 727: Match
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Console> class1 show class-map Class Map match-any class1 (id4) Match Ip dscp 11 21 match Use the match Class-map Configuration mode command to define the match criteria for classifying traffic. Use the no form of this command to delete the match criteria.
Page 728 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Syntax policy-map-name policy-map policy-map-name no policy-map Parameters policy-map-name—Specifies the policy map name. Default Configuration The default behavior of the policy map is to set the DSCP value to 0 if the packet is an IP packet, and to set the CoS value to 0 if the packet is tagged.
Page 729: Class
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm class The class Policy-map Configuration mode command defines a traffic classification and enters the Policy-map Class Configuration mode. Use the no form of this command to detach a class map from the policy map.
Page 730: Show Policy-Map
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Example The following example defines a traffic classification called Class1 with an access-group called Enterprise. The class is in a policy map called policy1. Console(config)# policy1 policy-map Console(config-pmap)# class1 enterprise class access-group show policy-map Use the show policy-map EXEC mode command to display all policy maps or a specific policy map.
Page 731: Trust
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm trust Use the trust Policy-map Class Configuration mode command to configure the trust state, which selects the value that QoS uses as the source of the internal DSCP value. Use the no form of this command to return to the default trust state.
Page 732: Set
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm If specifying trust cos, QoS maps a packet to a queue, the received or default port CoS value, and the CoS-to-queue map. If specifying trust dscp, QoS maps the packet using the DSCP value from the ingress packet.
Page 733: Police
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm • queue queue-id—Specifies the explicit queue id to set the egress queue. • cos new-cos—Specifies the new User priority to be marked in the packet. (Range: 0–7) Command Mode Policy-map Class Configuration mode User Guidelines This command and the trust Policy-map Class Configuration mode command are mutually exclusive within the same policy map.
Page 734 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Syntax committed-rate-kbps committed-burst-byte [exceed-action {drop | police policed-dscp-transmit}] no police Parameters • committed-rate-kbps—Specifies the average traffic rate (CIR) in kbits per second (bps). (Range: 3–12582912) • committed-burst-byte—Specifies the normal burst size (CBS) in bytes.
Page 735: Service-Policy
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm service-policy Use the service-policy Interface Configuration (Ethernet, VLAN, Port- channel) mode command to apply a policy map to the input of a particular interface. Use the no form of this command to detach a policy map from an interface.
Page 736 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm aggregate-policer-name no qos aggregate-policer Parameters • aggregate-policer-name—Specifies the aggregate policer name. • committed-rate-kbps—Specifies the average traffic rate (CIR) in kbits per second (kbps). (Range: 3–57982058) excess-burst-byte—Specifies the normal burst size (CBS) in bytes. (Range: •...
Page 737: Show Qos Aggregate-Policer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Example The following example defines the parameters of a policer called Policer1 that can be applied to multiple classes in the same policy map. When the average traffic rate exceeds 124,000 kbps or the normal burst size exceeds 9600 bytes, the packet is dropped.
Page 738: Wrr-Queue Cos-Map
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm the no form of this command to remove an existing aggregate policer from a policy map. Syntax aggregate-policer-name police aggregate aggregate-policer-name no police aggregate Parameters aggregate-policer-name—Specifies the aggregate policer name. Command Mode Policy-map Class Configuration mode...
Page 739 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm queue-id no wrr-queue cos-map [ Parameters • queue-id—Specifies the queue number to which the CoS values are mapped. • cos0 ... cos7—Specifies up to 7 CoS values to map to the specified queue number. (Range: 1–7)
Page 740: Wrr-Queue Bandwidth
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm wrr-queue bandwidth Use the wrr-queue bandwidth global Configuration command to assign Weighted Round Robin (WRR) weights to egress queues. The weight ratio determines the frequency at which the packet scheduler removes packets from each queue. Use the no form of this command to restore the default configuration.
Page 741: Priority-Queue Out Num-Of-Queues
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Example The followin 7 WRR queues. Console(config)# 6 6 6 6 6 6 6 6 wrr-queue bandwidth priority-queue out num-of-queues Use the priority-queue out num-of-queues Global Configuration mode command to configure the number of expedite queues. Use the no form of this command to restore the default configuration.
Page 742: Traffic-Shape
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Example The following example configures the number of expedite queues as 2. Console(config)# priority-queue out num-of-queues traffic-shape Use the traffic-shape Interface Configuration (Ethernet, Port-channel) mode command to configure the egress port shaper. Use the no form of this command to disable the shaper.
Page 743: Traffic-Shape Queue
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm traffic-shape queue Use the traffic-shape queue Interface Configuration (Ethernet, Port-channel) mode command to configure the egress queue shaper. Use the no form of this command to disable the shaper. Syntax queue-id committed-rate committed-burst traffic-shape queue...
Page 744: Rate-Limit (Ethernet)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm rate-limit (Ethernet) Use the rate-limit Interface Configuration (Ethernet) mode command to limit the incoming traffic rate on a port. Use the no form of this command to disable the rate limit. Syntax committed-rate-kbps [burst committed-burst-byte]...
Page 745: Show Qos Interface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Syntax qos wrr-queue wrtd no qos wrr-queue wrtd Parameters This command has no arguments or keywords. Default Disabled Command Mode Global Configuration mode User Guidelines The command is effective after reset. show qos interface Use the show qos interface EXEC mode command to display Quality of Service (QoS) information on the interface.
Page 746 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm • interface-id—Specifies an interface ID. The interface ID can be one of the following types: Ethernet port, or Port-channel. Default Configuration There is no default configuration for this command. Command Mode EXEC mode User Guidelines The policers option is relevant for a VLAN interface only.
Page 747 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm This is an example of the output from the show qos interface shapers command for 8 queues. Console> gi1/0/1 show qos interface shapers gigabitethernet 1/0/1 Port shaper: enable Committed rate: 192000 bps Committed burst: 9600 bytes...
Page 748: Qos Wrr-Queue Threshold
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm This is an example of the output from the show qos interface policer command. gi1/0/ Console> show qos interface policer Ethernet gi1/0/ Class map: A Policer type: aggregate Commited rate: 192000 bps Commited burst: 9600 bytes...
Page 749: Qos Map Policed-Dscp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Syntax gigabitethernet queue-id threshold-percentage qos wrr-queue threshold gigabitethernet queue-id no qos wrr-queue threshold Parameters • gigabitethernet—Specifies that the thresholds are to be applied to Gigabit Ethernet ports. • queue-id—Specifies the queue number to which the tail-drop threshold is assigned.
Page 750: Qos Map Dscp-Queue
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Parameters • dscp- list—Specifies up to 8 DSCP values, separated by spaces. (Range: 0–63) • dscp-mark-down—Specifies the DSCP value to mark down. (Range: 0–63) Default Configuration The default map is the Null map, which means that each incoming DSCP value is mapped to the same DSCP value.
Page 751: Qos Map Dscp-Dp
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Default Configuration The default map for 8 queues is as follows. DSCP 8-15 16-23 24-31 32-39 40-47 48-56 57-63 value Queue- Command Mode Global Configuration mode Example The following example maps DSCP values 33, 40 and 41 to queue 1.
Page 752: Qos Trust (Global)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Command Mode Global Configuration mode. Example The following example maps DSCP values 25, 27 and 29 to Drop Precedence Console(config)# 25 27 29 qos map dscp-dp qos trust (Global) Use the qos trust Global Configuration mode command to configure the system to the basic mode and trust state.
Page 753: Qos Trust (Interface)
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm because there is no need to classify the packets at every switch within the domain. Use this command to specify whether the port is trusted and which fields of the packet to use to classify traffic.
Page 754: Qos Cos
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Console(config)# gi1/0/ interface Console(config-if)# qos trust qos cos Use the qos cos Interface Configuration (Ethernet, Port-channel) mode command to define the default CoS value of a port. Use the no form of this command to restore the default configuration.
Page 755: Qos Dscp-Mutation
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm qos dscp-mutation Use the qos dscp-mutation Global Configuration mode command to apply the DSCP Mutation map to system DSCP trusted ports. Use the no form of this command to restore the trusted port with no DSCP mutation.
Page 756: Show Qos Map
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Syntax in-dscp out-dscp qos map dscp-mutation in-dscp no qos map dscp-mutation [ Parameters • in-dscp—Specifies up to 8 DSCP values to map, separated by spaces. (Range: 0–63) • out-dscp—Specifies up to 8 DSCP mapped values, separated by spaces.
Page 757 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Parameters dscp-queue—Displays the DSCP to queue map. • • dscp-dp—Displays the DSCP to Drop Precedence map. • policed-dscp—Displays the DSCP to DSCP remark table. dscp-mutation—Displays the DSCP-DSCP mutation table. • Command Mode EXEC mode Example The following example displays the QoS mapping information.
Page 758: Clear Qos Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm The following table appears:. Policed-dscp map: The following table appears:. Dscp-dscp mutation map: clear qos statistics Use the clear qos statistics EXEC mode command to clear the QoS statistics counters. Syntax clear qos statistics...
Page 759: Qos Statistics Policer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Example The following example clears the QoS statistics counters. Console# clear qos statistics qos statistics policer Use the qos statistics policer Interface Configuration (Ethernet, Port- channel) mode command to enable counting in-profile and out-of-profile.
Page 760: Qos Statistics Aggregate-Policer
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm qos statistics aggregate-policer Use the qos statistics aggregate-policer Global Configuration mode command to enable counting in-profile and out-of-profile. Use the no form of this command to disable counting. Syntax aggregate-policer-name qos statistics aggregate-policer aggregate-policer-name...
Page 761: Show Qos Statistics
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Parameters set—Specifies the counter set number. • • interface—Specifies the Ethernet port. • queue—Specifies the output queue number. • dp—Specifies the drop precedence. The available values are: high, low. Default Configuration Set 1: All interfaces, all queues, high DP .
Page 762 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm User Guidelines Up to 16 sets of counters can be enabled for policers. The counters can be enabled in the creation of the policers. Use the qos statistics queues Global Configuration mode command to enable QoS statistics for output queues.
Page 763 FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax CLI\files\QoS.fm Output Queues ------------- Interface Queue Total packets %TD packets --------- ----- ------------- ----------- gi1/0/1 High 799921 1.2% gi1/0/2 High 5387326 0.2% D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY...

This manual is also suitable for:

Powerconnect pc5524p Powerconnect pc5548 Powerconnect pc5548p

Dell PowerConnect PC5524 Reference Manual

1 Preface

2 User Interface Commands

3 Macro Commands

4 System Management Commands

5 Clock Commands

6 Configuration/Image File Commands

7 Auto-Update and Auto-Configuration

8 Management ACL Commands

9 SNMP Commands

10 RSA and Certificate Commands

11 Web Server Commands

12 Telnet, SSH and Slogin Commands

13 Line Commands

14 AAA Commands

15 RADIUS Commands

16 TACACS+ Commands

17 Syslog Commands

18 RMON Commands

19 1X Commands

20 Ethernet Configuration Commands

Quick Links

CLI Reference Guide

Related Manuals for Dell PowerConnect PC5524

Summary of Contents for Dell PowerConnect PC5524