Dell PowerConnect PC5524 Reference Manual page 345

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
The following table describes the fields shown in the display.
F i e ld
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
FCS Errors
Single Collision Frames
Multiple Collision Frames
SQE Test Errors
Deferred Transmissions
Late Collisions
Excessive Collisions
Oversize Packets
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Ethernet.fm
D e s c r i p t io n
The number of received octets.
The number of received unicast packets.
The number of received multicast packets.
The number of received broadcast packets.
The number of transmitted octets.
The number of transmitted unicast packets.
The number of transmitted multicast packets.
The number of transmitted broadcast packets.
The number of frames received that are an
integral number of octets in length but do not
pass the FCS check.
The number of frames that are involved in a
single collision, and are subsequently
transmitted successfully.
The number of frames that are involved in more
than one collision and are subsequently
transmitted successfully.
The number of times that the SQE TEST
ERROR is received. The SQE TEST ERROR is
set in accordance with the rules for verification of
the SQE detection mechanism in the PLS
Carrier Sense Function as described in IEEE
Std. 802.3, 2000 Edition, section 7.2.4.6.
The number of frames for which the first
transmission attempt is delayed because the
medium is busy.
The number of times that a collision is detected
later than one slotTime into the transmission of a
packet.
The number of frames for which transmission
fails due to excessive collisions.
The number of frames received that exceed the
maximum permitted frame size.
Ethernet Configuration Commands
345