Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Fast Ethernet (100 Mbps)
Ethernet (10 Mbps)
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Example
The following example configures the MSTP instance 1 path cost for
gigabitethernet port 1/0/9 to 4.
Console(config)#
Console(config-if)#
spanning-tree mst configuration
Use the spanning-tree mst configuration Global Configuration mode
command to enable configuring an MST region by entering the Multiple
Spanning Tree (MST) mode.
Syntax
spanning-tree mst configuration
Command Mode
Global Configuration mode
User Guidelines
For two or more switches to be in the same MST region, they need to contain
the same VLAN mapping, the same configuration revision number, and the
same name.
Example
The following example configures an MST region.
Console(config)#
Console(config-mst)#
Console(config-mst)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Spanning-Tree.fm
gigabitethernet 1/0/9
interface
spanning-tree mst
spanning-tree mst configuration
1
instance
region1
name
200,000
2,000,000
1
cost
10-20
vlan
Spanning-Tree Commands
19
100
4
471
Advertisement
Table of Contents
