Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
show cable-diagnostics cable-length
Use the show cable-diagnostics cable-length EXEC mode command to
display the estimated copper cable length attached to all ports or to a specific
port.
Syntax
show cable-diagnostics cable-length [
Parameters
interface-id—Specify an interface ID. The interface ID must be an Ethernet
port.
Command Mode
EXEC mode
User Guidelines
The port must be active and working at 100 M or 1000 M.
Example
The following example displays the estimated copper cable length attached to
all ports.
Console>
show
Port
----
gi1/0/
1
gi1/0/
2
gi1/0/
3
gi1/0/
4
show fiber-ports optical-transceiver
Use the show fiber-ports optical-transceiver EXEC mode command to
display the optical transceiver diagnostics.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Phy_Diagnostics.fm
cable-diagnostics
Length [meters]
-----------------
< 50
Copper not active
110-140
Fiber
interface interface-id
cable-length
PHY Diagnostics Commands
]
353
Advertisement
Table of Contents
