Port-Channel Load-Balance - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Console(config-if)#

port-channel load-balance

Use the port-channel load-balance Global Configuration mode command to
configure the load balancing policy of the port channeling. Use the no form of
this command to reset to default.
Syntax
port-channel load-balance
no port-channel load-balance
Parameters
• src-dst-mac—Port channel load balancing is based on the source and
destination MAC address.
• src-dst-ip—Port channel load balancing is based on the source and
destination IP address.
src-dst-mac-ip—Port channel load balancing is based on the source and
•
destination of MAC and IP addresses.
Default Configuration
src-dst-mac is the default option.
Command Mode
Global Configuration mode
User Guidelines
In src-dst-mac-ip-port load balancing policy, fragmented packets might be
reordered.
Example
console#
console# configure
console(config)# port-channel load-balance src-dst-mac
console(config)# port-channel load-balance src-dst-ip
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
384
Port Channel Commands
CLI\files\Port_Channel.fm
1
channel-group
{src-dst-mac | src-dst-ip | src-dst-mac-ip | }
mode on