Show Qos Map - Dell PowerConnect 3524 Cli Reference Manual

Default Configuration
Default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode.
User Guidelines
• If the port is trusted, the default CoS value of the port is used to assign a CoS value to all untagged
packets entering the port.
Example
The following example configures port 1/e15 default CoS value to 3.
Console(config)# interface ethernet 1/e15
Console(config-if) qos cos 3

show qos map

The show qos map User EXEC mode command displays all QoS maps.
Syntax
• show qos map [dscp-queue]
• dscp-queue — Indicates the DSCP to queue map.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
308
QoS Commands