Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
User Guidelines
This command only determines the global mode and does not enable/disable
Flow Control on any interface. Flowcontrol must also be enabled on the
specific interfaces required (they are enabled by default).
Example
The following example enables Flow Control in the mode of only receiving pause
frames and not sending them.
Console(config)#
flowcontrol receive-only
show flowcontrol
Use the show flowcontrol Exec mode command to display the Flow Control
global mode.
Syntax
show flowcontrol
Parameters
N/A
Default Configuration
N/A
Command Mode
Exec mode
Example
The following example displays the global Flow Control mode when it is receive-
only.
Console# show
flowcontrol
Global Flow Control mode is receive-only.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
335
Ethernet Configuration Commands
Advertisement
Table of Contents
