Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IGMP_Snooping.fm
Syntax
vlan-id
ip igmp snooping vlan
vlan-id
no ip igmp snooping vlan
Parameters
vlan-id—Specifies the VLAN.
Default
Disabled
Command Mode
Global Configuration mode
User Guidelines
IGMP snooping can be enabled only on static VLANs.
IGMPv1, IGMPv2 and IGMPv3 are supported.
To activate IGMP snooping, the bridge multicast filtering should be enabled.
The User Guidelines of the bridge multicast mode Interface VLAN
Configuration command describes the configuration that is written into the
FDB as a function of the FDB mode and the IGMP version that is used in the
network.
Example
console(config)# ip igmp snooping vlan 2
ip igmp snooping mrouter
Use the ip igmp snooping mrouter Global Configuration mode command to
enable automatic learning of multicast router ports. Use the no form of this
command to remove the configuration.
Syntax
vlan vlan-id
earn pim-dvmrp
ip igmp snooping
mrouter l
vlan vlan-id
learn pim-dvmrp
no ip igmp snooping
mrouter
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
524
IGMP Snooping Commands
Advertisement
Table of Contents
