Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DHCP_Snooping.fm
ip arp inspection list create
Use the ip arp inspection list create Global Configuration mode command to
create a static ARP binding list and enters the ARP list configuration mode.
Use the no form of this command to delete the list.
Syntax
name
ip arp inspection list create
name
no ip arp inspection list create
Parameters
name—Specifies the static ARP binding list name. (Length: 1–32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
User Guidelines
Use the ip arp inspection list assign command to assign the list to a VLAN.
Example
The following example creates the static ARP binding list 'servers' and enters
the ARP list configuration mode.
Console(config)#
servers
ip arp inspection list create
Console(config-ARP-list)#
ip mac
Use the ip mac ARP-list Configuration mode command to create a static ARP
binding. Use the no form of this command to delete a static ARP binding.
Syntax
ip-address
mac-address
ip
mac
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
580
DHCP Snooping and ARP Inspection Commands
Advertisement
Table of Contents
