System Light; Switch Renumber - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Command Mode
Global Configuration mode
Example
The following example forces the stack master to be unit 2.
Console(config)#

system light

Use the system light EXEC command to light LEDs on a specific unit.
Syntax
unit unit-number] [duration seconds
system light [
system light stop
Parameters
unit-number—Specify unit number or all.
•
• seconds—The number of seconds to light the LEDs. If unspecified,
defaults to 5 seconds. (Range: 2–6)
• stop—Stop lighting the LEDs.
Command Mode
EXEC mode

switch renumber

Use the switch renumber Global Configuration command to change the unit
ID of a specific unit.
Syntax
current-unit-number renumber new-unit-number
switch
Parameters
current-unit-number—Specify Unit number. (Range: 1–
•
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
84
System Management Commands
CLI\files\System_Management.fm
stack master unit
2
]
8)