Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
class
The class Policy-map Configuration mode command defines a traffic
classification and enters the Policy-map Class Configuration mode. Use the
no form of this command to detach a class map from the policy map.
Syntax
class-map-name [access-group acl-name
class
class-map-name
no class
Parameters
•
class-map-name—Specifies the name of an existing class map. If the class
map does not exist, a new class map is created under the specified name.
•
acl-name—Specifies the name of an IP or MAC Access Control List
(ACL).
Default Configuration
No class map is defined for the policy map.
Command Mode
Policy-map Configuration mode
User Guidelines
Use the policy-map Global Configuration mode command to identify the
policy map and to enter the Policy-map Configuration mode before using the
class command. After specifying a policy map, a policy for new classes can be
configured or a policy for any existing classes in that policy map can be
modified.
Use the service-policy Interface Configuration (Ethernet, Port-channel)
mode command to attach a policy map to an interface. Use an existing class
map to attach classification criteria to the specified policy map and use the
access-group parameter to modify the classification criteria of the class map.
If this command is used to create a new class map, the name of an IP or MAC
ACL must also be specified with the access-group parameter.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\QoS.fm
]
Quality of Service (QoS) Commands
729
Advertisement
Table of Contents
