Police - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
• queue queue-id—Specifies the explicit queue id to set the egress queue.
• cos new-cos—Specifies the new User priority to be marked in the packet.
(Range: 0–7)
Command Mode
Policy-map Class Configuration mode
User Guidelines
This command and the trust Policy-map Class Configuration mode
command are mutually exclusive within the same policy map.
Policy maps that contain set or trust Policy-map Class Configuration mode
commands or that have ACL classifications cannot be attached to an egress
interface using the Service-policy Interface Configuration mode command.
To return to the Policy-map Configuration mode, use the exit command. To
return to the Privileged EXEC mode, use the end command.
Example
The following example creates an ACL, places it into a class map, places the
class map into a policy map and sets the DSCP value in the packet to 56 for
classes in policy map called p1.
console(config)# mac access-list extended m1
console(config-mac-al)# permit any any
console(config-mac-al)# exit
console(config)# class-map c1
console(config-cmap)# match access-group m1
console(config-cmap)# exit
console(config)# policy-map p1
console(config-pmap)# class c1
Console(config-pmap-c)#

police

Use the police Policy-map Class Configuration mode command to define the
policer for classified traffic. Use the no form of this command to remove a
policer.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\QoS.fm
56
set dscp
Quality of Service (QoS) Commands
733