Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
ethernet interface-list—Specifies a list of Ethernet ports. Separate
•
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
•
port-channel port-channel-list—Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
Forwarding of all multicast packets is disabled.
Command Mode
Interface Configuration (VLAN) mode
Example
The following example enables all multicast packets on port gi1/0/8 to be
forwarded.
Console(config)#
Console(config-if)#
bridge multicast forbidden forward-all
Use the bridge multicast forbidden forward-all Interface Configuration
(VLAN) mode command to forbid a port to dynamically join multicast
groups. Use the no form of this command to restore the default
configuration.
Syntax
bridge multicast forbidden forward-all
list | port-channel port-channel-list}
no bridge multicast forbidden forward-all
Parameters
•
add—Forbids forwarding of all multicast packets.
•
remove—Does not forbid forwarding of all multicast packets.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
392
Address Table Commands
CLI\files\Address_Table.fm
interface vlan
bridge multicast forward-all add
2
{add | remove} {ethernet interface-
gi1/0/8
Advertisement
Table of Contents
